Search

This paper proposes a novel dual-input matrix converter (DIMC) to integrate two three-phase ac type energy resources to a power grid. The proposed matrix converter is developed based on the traditional indirect matrix converter under reverse power flow operation mode, but with its six-switch voltage source converter replaced by a nine-switch configuration. With the additional three switches, the proposed DIMC can provide six input terminals, which make it possible to integrate two independent ac sources into a single grid-tied power electronics interface. The proposed converter has input-to-output voltage boost capability since power flows from the converter's voltage source side to its current source side. Commanded currents can be extracted from the two input sources to the grid. The proposed control and modulation schemes guarantee sinusoidal input and output waveforms as well as unity input power factors. The simulation and experimental results using a laboratory prototype are provided to validate the effectiveness of the proposed control and modulation schemes for the proposed converter. [ABSTRACT FROM PUBLISHER]

This paper presents a novel matrix converter with one ac input and two ac outputs. The presented topology is based on the traditional indirect matrix converter, but with its rear-end six-switch inverter replaced by a compact nine-switch inverter. With only three extra switches added, the proposed converter can produce two sets of three-phase ac outputs, whose amplitudes, frequencies, and phases can appropriately be regulated. Features such as sinusoidal input and outputs, unity input power factor and minimum commutation count are all retained by the proposed topology, despite having an additional output. Its modulation is realized by the computationally less intensive carrier-based method, whose unique carrier requirements can easily be managed within a programmable logic device. Mathematical proof for validating sinusoidal input and outputs achieved by this modulation technique is also discussed, before being verified in simulation and experimentally, together with other findings. [ABSTRACT FROM AUTHOR]

This paper presents a uniform control strategy for the bidirectional ac/dc interlinking converter (BIC) in hierarchical controlled hybrid microgrid. The uniform control strategy unifies different control structures for multifunctional BIC in terms of power management, ac and dc voltage support. With the unified control structure, various triggering mechanisms for BIC mode-switch are not compulsory in response to the relevant scenario changes in the power network. Therefore, the negative consequences, such as unsmooth transition and system collapse due to the inaccurate or slower mode switch, can be avoided. Moreover, the uniform control strategy is also applicable for the hierarchical controlled hybrid microgrid, whose control architecture is typically comprised of the centralized and decentralized levels. This enables the communication fault ride-through capability and the impact from the communication failures can thus be mitigated. To sum up the above two features, the proposed control strategy is able to provide a smooth operation for the BIC without control mode switch in the event of unintentional scenario changes in power or communication network. To verify the validity of the proposed uniform control strategy, the controller hardware-in-the-loop experimental results have been provided in this paper. [ABSTRACT FROM PUBLISHER]

A compact interlinking converter modular (ICM) for hybrid ac/dc microgrids with a distributed storage (DS) bus for storage integration is proposed in this article. The advanced ICM for hybrid ac/dc/ds microgrids involves the nine-switch topology with compact configuration and decreased number of active operating switches, which structurally equivalents to afford a dc interconnection port for dc subgrid, an ac interconnection port for ac subgrid, a ds interconnection port for ds subgrid, and two dc–dc converters for the interconnection ports for parallel DSs. In addition to the popular advantage of component elements saving, the suggested ICM, aggregating various interlinking converter cells (ICCs) into an ICM, is also proficient of participating computations from all ICC sensors to enhance the overall modular performance without building extra communication connection links between ICCs. With this in mind, a decentralized power management control strategy is realized by employing a coordination power control methodology to systematically handle various distributed generations (DGs), DSs, and ICM in a decentralized manner with improved communication fault ride-through capability. The controller hardware-in-the-loop experiments on a real-time digital simulator platform validates the achievement of the advanced ICM application in hybrid ac/dc/ds microgrids and the effectiveness of the associated decentralized power management scheme. [ABSTRACT FROM AUTHOR]

This paper proposes a multiple-input versatile matrix converter (VMC) for integrating hybrid ac/dc energy resources and storages to the power grid. The VMC is developed from the traditional indirect matrix converter but operates in the reverse-boost mode rather than in the forward-buck mode. The reverse-boost mode is more relevant here since most renewable sources and energy storages have lower voltages than the grid. The eventual VMC developed uses an alternative nine-switch converter, rather than usual six-switch voltage-source converter, for providing six input terminals in total. One three-phase ac source and three dc sources, or other source combinations, can therefore be connected to the VMC. Powers from these sources are channeled to the three-phase utility grid through the VMC's current-source inverter. Their proper dispatches are guaranteed by the proposed control and modulation schemes, which also help maintain near-sinusoidal input and output current waveforms. Mathematical proofs, simulation, and experimental results have shown that the VMC can indeed operate as intended. [ABSTRACT FROM PUBLISHER]

A novel high-efficiency resonant light emitting diode (LED) backlight driver with passive current balancing and dimming is proposed and analyzed in this paper. The proposed LED driver achieves uniform brightness of each LED string by the charge balance of the resonant capacitor, which benefits from high efficiency. By controlling the output current of one LED string, the output currents of other LED strings can be controlled via current balancing of resonant capacitors, which makes its control simple. The proposed LED driver uses only one active switch, which decreases circuit volume and simplifies the control. Furthermore, a wide load range can be achieved by controlling the turn-on duty ratio of the single power switch of the LED driver with a fixed frequency. Finally, a prototype of a high-dimming-ratio small-size three-string LED driver is provided to verify the studied results. [ABSTRACT FROM PUBLISHER]