Search

Bidirectional reflectance distribution function (BRDF) models are used to correct surface bidirectional effects and estimate land surface albedo. Many operational BRDF/albedo algorithms adopt a Roujean linear kernel-driven BRDF (RLKB) model because of its simple form and good performance in fitting multidirectional surface reflectance values. However, this model does not explicitly consider topographic effects, resulting in errors when applied over rugged terrain. To address this issue, we proposed a hybrid algorithm suitable for both flat and rugged terrain, called topographical kernel-driven (Topo-KD). First, we constructed a linear kernel-driven BRDF model considering terrain (LKB_T) which describes the topographic effects with a mountain radiative transfer (MRT) model. Then, the Topo-KD algorithm adaptively selects the most suitable model (RLKB or LKB_T) according to the terrain conditions and fitting residuals. The performances of Topo-KD and RLKB using the RossThick-LiSparseReciprocal (RTLSR) kernel are compared using simulated data sets and moderate-resolution imaging spectroradiometer (MODIS) observations. The results show that the BRDF of the pixel is affected by topography. But the RTLSR model does not specifically account for it, resulting in larger biases over rugged terrain than the Topo-KD algorithm in both the red and near-infrared (NIR) bands. The experiment using MODIS data sets demonstrates that the Topo-KD algorithm reduces fitting residuals in the red and NIR bands by 21.5% and 27.4% compared with the RTLSR model. These results indicate that the Topo-KD algorithm can be a better choice for retrieving land surface parameters and describing the radiative transfer process in mountainous areas.

Remote sensing estimation based on the dimidiate pixel model (DPM) using vegetation indices (VIs) is a common approach for mapping fractional vegetation cover (FVC). The major drawback of DPM is that it does not consider real endmember conditions and multiple scattering between soil and vegetation. An analysis of FVC uncertainties caused by these model deficiencies is still lacking. Here, we first calculated the FVC theoretical uncertainty caused by reflectance uncertainties based on the law of prapagation of uncertainty (LPU). Then, we tested the performance of DPM using six VIs over 3-D forest scenes. We simulated both Aqua-MODIS and Landsat-OLI surface reflectance (SR) at their corresponding spatial resolutions and spectral response functions (SRFs) using a well-validated 3-D radiative transfer (RT) model which helps to separate the model and input uncertainties. We found that ratio vegetation index (RVI)- and enhanced vegetation index (EVI)-based models were most affected by sensors, followed by the normalized difference vegetation index (NDVI)-, enhanced vegetation index 2 (EVI2)-, renormalized difference vegetation index (RDVI)-, and difference vegetation index (DVI)-based models. Without considering SR uncertainties, the DVI-based model performed best (FVC absolute difference < 0.1); however, the commonly used NDVI model reached a maximum difference of 0.35. At the same time, input uncertainty increased the uncertainty of FVC retrieval. We noticed that the increase of solar zenith angle (SZA) resulted in a clear increase of retrieved FVC under the uniform distribution, which can be explained by the increased shadow proportion. Besides, model accuracy was dominated by the purity of soil (vegetation) endmember in low (high) vegetation cover area. This study provides a reference for the selection of the optimal VI for FVC retrieval based on the DPM.

International audience; Occlusion effect, an inherent problem of terrestrial laser scanning (TLS) measurements, limits the potential of TLS data in tree attribute estimation. Multiple scans seek to mitigate this effect to provide enhanced scan completeness. However, the numbers and locations of the scans (i.e., the scan design) are usually determined via a subjective assessment of the tree density, spatial patterns of trees, and attributes to be derived. These could cause suboptimal scan completeness and limit tree attribute estimation. This study proposed an iterative-mode scan design to minimize the occlusion effect. First, we introduced a PoTo index based on visibility analysis to evaluate how many trees can be scanned from a location and to select effective candidates for the optimal TLS location. Second, we introduced a cumulative degree of ring closure (CDRC) to quantify the scan completeness for each candidate and determine the optimal TLS location. The TLS data sets of virtual forests with field-measured and synthetic plot parameter settings were simulated according to iterative- and regular-mode designs by using a Heidelberg light detection and ranging (LiDAR) Operations Simulator (HELIOS). The results demonstrated that an iterative-mode design can improve the scan completeness of trees compared to the regular-mode design. The tree attribute (diameter at breast height (DBH), tree height, stem curve, and crown volume) estimates of the iterative-mode design were less erroneous than those of the regular-mode design (e.g., the root-mean-square error (RMSE) could decrease the stem curve estimation by 38 and the crown volume estimation by 15). This study suggests that the iterative-mode design can obtain an improved quality of the TLS data, especially for dense stands.

Estimation of downward shortwave radiation (DSR) is of great importance in global energy budget and climatic modeling. Although various algorithms have been proposed, effective validation methods are absent for rugged terrains due to the lack of rigorous methodology and reliable field measurements. We propose a two-step validation method for rugged terrains based on computer simulations. The first step is to perform point-to-point validation at local scale. Time-series measurements were applied to evaluate a three-dimensional (3-D) radiative transfer model. The second step is to validate the DSR at pixel-scale. A semiempirical model was built up to interpolate and upscale the DSR. Key terrain parameters were weighted by empirical coefficients retrieved from ground-based observations. The optimum number and locations of ground stations were designed by the 3-D radiative transfer model and Monte Carlo method. Four ground stations were selected to upscale the ground-based observations. Additional three ground stations were set up to validate the interpolated results. The upscaled DSR was finally applied to validate the satellite products provided by MODIS and Himawari-8. The results showed that the modeled and observed DSR exhibited good consistency at point scale with correlation coefficients exceeding 0.995. The average error was around 20 W/m2 for the interpolated DSR and 10 W/m2 for the upscaled DSR in theory. The accuracies of the satellite products were acceptable at most times, with correlation coefficients exceeding 0.94. From an operational point of view, our method has an advantage of using small amount of ground stations to upscale DSR with relatively high accuracy over rugged terrains.

Estimation of daily downward shortwave radiation (DSR) is of great importance in global energy budget and climatic modeling. The combination of satellite-based instantaneous measurements and temporal extrapolation models is the most feasible way to capture daily radiation variations at large scales. However, previous studies did not pay enough attention to topographic effects and simple temporal extrapolation methods were applied directly to rugged terrains which cover a large amount of the land surface. This paper, divided into two parts, aims at analyzing the topographic uncertainties of existing models and proposing a better method based on a mountain radiative transfer (MRT) model to calculate daily DSR. As the first part, this paper analyze the spatiotemporal variations of DSR influenced by topographic effects and checks the applicability of three temporal extrapolation methods on cloud-free days. Considering that clouds also have a strong influence on solar radiation, cloud-free days are chosen for targeted analysis of topographic effects on DSR. Three indices, the coefficient of variation, entropy-based dispersion coefficient (CH), and sill of semivariogram, are put forward to give a quantitative description of spatial heterogeneity. Our results show that the topography can dramatically strengthen the spatial heterogeneity of DSR. The index, CH, has an advantage for quantifying spatial heterogeneity as it offers a tradeoff between accuracy and efficiency. Spatial heterogeneity distorts the daily variation of DSR. Application of extrapolation methods in rugged terrains leads to overestimation of daily average DSR up to 60 W/m2 and a maximum 200 W/m2 error of instantaneous DSR on cloud-free days. This paper makes a quantitative analysis of topographic effects under different spatiotemporal conditions, which lays the foundation for developing a new extrapolation method.

This paper aimed at the case of nonisothermal pixels and proposed a daytime temperature-independent spectral indices (TISI) method to retrieve directional emissivity and effective temperature from daytime multiangular observed images in both middle and thermal infrared (MIR and TIR) channels by combining the kernel-driven bidirectional reflectance distribution function (BRDF) model and the TISI method. Four groups of angular observations and two groups of MIR and TIR channels with narrow and broad bandwidths were used to investigate the influence of angular observations and bandwidth on the retrieval accuracy. Model sensitivity analysis indicated that the new method can generally obtain directional emissivity and temperature with an error less than 0.015 and 1.5 K if the noise included in the measured directional brightness temperature (DBT) and atmospheric data was no more than 1.0 K and 10%, respectively. The analysis also indicated that 1) large-angle intervals among the angular observations and a larger viewing zenith angle, with respect to nadir direction, can improve the retrieval accuracy because those angle conditions can result in significant difference for components' fractions and DBT under different viewing directions; 2) narrow channels can produce better results than broad channels. The new method was finally applied to a multiangular MIR and TIR data set acquired by an airborne system, and a modified kernel-driven BRDF model was used for angular normalization to the surface temperature for the first time. The difference of the retrieved emissivity and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) emissivity was found to be approximately 0.012 in the study area.

Accurate spectral calibration of the in-flight sensors is crucial for processing and exploration of remotely sensed data. This paper developed a strategy to make spectral recalibration (i.e., spectral response function, central wavelength, and bandwidth) for in-flight broadband sensor using a device-responsivity-decomposition model with a priori knowledge and an optimization algorithm. Sensitivity analysis indicates that an accurate result requires the targets to be observed under a dry and clear atmospheric condition (column water vapor 23 km) and no more than 5% error is included in the measured data. The new strategy was used to retrieve the spectral parameters along with radiometric calibration coefficients for a multichannel camera onboard an unmanned aerial vehicle from simultaneously remotely sensed and ground measured data sets over 19 (15 color-scaled and four gray-scaled) man-made surface targets, and the retrieved results were validated with a similar data set over another four man-made targets. It demonstrated that the camera's spectral parameters were accurately retrieved and an error less than 3.5 W/m2/μm/sr was brought to the channel radiance.

Accurate radiometric and spectral calibrations of hyperspectral remote sensing instruments are essential for optimum data processing and exploitation. Two improved methods for the refinement of the spectral calibration of air- and spaceborne imaging spectrometers are presented in this paper. Both spectral channel position and width can be retrieved by modeling the atmospheric absorption features around 760, 940, 1140, and 2060 nm without making use of external atmospheric or surface parameters. A sensitivity analysis based on synthetic data demonstrated that, for each of the two methods, the root-mean-square errors to be expected were less than 0.18 nm for the retrieval of channel wavelength center and less than 0.8 nm for channel full-width at half-maximum. The application of the proposed methods to a real Hyperion data set showed quite-similar cross-track variations in the spectral calibration for the two methods, although relatively large differences in magnitude were found near the 940- and 1140-nm H2O absorption features. The significant improvement of the reflectance spectra derived after the refinement of the instrument spectral calibration confirms the good performance of the proposed methods.