Search

The characteristics of synthetic aperture radar (SAR) image texture may be related to the properties of underlying elemental scene scatterers through established models based on the properties of a backscattering coefficient (in this paper, we use and unnormalized coefficient s) of these scatterers. In this paper, we generate raw SAR data by simulating the statistical characteristics of elemental scene scatterers such as the order of the gamma distribution, the form and length of their spatial correlation, and their spatial density. This simulation is carried out using a SAR signal simulation system called cSAR. We describe a particular set of methods to simulate image texture used in cSAR, and provide a detailed analysis of simulated s and of the speckle and texture characteristics of simulated images. We found that the distribution of s was strongly affected by the order, density, and correlation length of the underlying scatterers. We found that the simulated SAR images were consistently K-distributed as expected. The estimated image order was a strong function of the scattering properties and that the estimated image order is a relatively weak descriptor of image texture when used on its own The correspondence between the observed image autocorrelation function (ACF) and the theoretical models of Oliver is excellent, and we could estimate the scatterer correlation length by fitting the Oliver model to the observed ACE We combined the estimated image order and correlation length and found potential for using these two image texture descriptors in classification and segmentation algorithms. [ABSTRACT FROM AUTHOR]

Sea ice has a significant effect on climate change and ship navigation. Hence, it is crucial to draw sea-ice maps that reflect the geographical distribution of different types of sea ice. Many automatic sea-ice classification methods using synthetic aperture radar (SAR) images are based on the polarimetric characteristics or image texture features of sea ice. They either require professional knowledge to design the parameters and features or are sensitive to noise and condition changes. Moreover, ice changes over time are often ignored. In this article, we propose a new SAR sea-ice image classification method based on a combined learning of spatial and temporal features, derived from residual convolutional neural networks (ResNet) and long short-term memory (LSTM) networks. In this way, we achieve automatic and refined classification of sea-ice types. First, we construct a seven-type ice data set according to the Canadian Ice Service ice charts. We extract spatial feature vectors of a time series of sea-ice samples using a trained ResNet network. Then, using the feature vectors as inputs, the LSTM network further learns the variation of the set of sea-ice samples with time. Finally, the extracted high-level features are fed into a softmax classifier to output the most recent ice type. Taking both spatial features and time variation into consideration, our method can achieve a high classification accuracy of 95.7% for seven ice types. Our method can automatically produce more objective sea-ice interpretation maps, allowing detailed sea-ice distribution and improving the efficiency of sea-ice monitoring tasks. [ABSTRACT FROM AUTHOR]

The extraction of river planforms from remotely sensed satellite images is a task of crucial importance to many applications such as land planning, water resource monitoring, or flood prediction. In this article, we present a novel framework for the extraction of rivers from synthetic aperture radar (SAR) images, based on superpixel segmentation and subsequent classification. Superpixel segmentation is achieved by a modeling of the image pixels’ amplitudes and spatial coordinates as a finite mixture model, where the generalized Gamma distribution is used to model accurately a variety of high-resolution SAR scenes. A number of features describing image texture and statistics are extracted on a superpixel level, facilitating the identification of river superpixels—planforms are then extracted by unsupervised, agglomerative clustering, thus eliminating the need for labeled training data. We present the results of our proposed method on the ICEYE-X2 and SENTINEL-1 SAR data, demonstrating its ability to produce pixel-accurate river masks. [ABSTRACT FROM AUTHOR]

Seabed characterization has utility for numerous applications that seek to explore and interact with the seafloor, ranging from coastal habitat monitoring and subbottom profiling to man-made object detection. In this paper, we characterize seabeds based on the texture patterns within synthetic aperture SONAR (SAS) images constructed from high-frequency side-scan sonar. Features are measured from the SAS images (e.g., lacunarity, an established texture feature coding method, and a circularly shifted histogram of oriented gradients). Based on these SAS image features, we perform unsupervised clustering with a hierarchical Bayesian model, which creates categories of seabed textures. Our clustering algorithm is a new variant of the hierarchical Dirichlet process that is both adaptive to changes in seabeds and processes batches of SAS imagery in an online fashion to learn new seabed types as they are encountered. This allows observations to be clustered, as each batch is processed rather than only after all data have been collected. The model’s performance of seabed characterization by SAS image texture is demonstrated in the overall range and internal consistency of textures specific to each learned cluster with data across a variety of sites. [ABSTRACT FROM AUTHOR]

Remote sensing images exhibit significant contrast and intensity regions and edges, which makes them highly suitable for using different texture features to properly represent and classify the objects that they contain. In this paper, we present a new technique based on multiple morphological component analysis (MMCA) that exploits multiple textural features for decomposition of remote sensing images. The proposed MMCA framework separates a given image into multiple pairs of morphological components (MCs) based on different textural features, with the ultimate goal of improving the signal-to-noise level and the data separability. A distinguishing feature of our proposed approach is the possibility to retrieve detailed image texture information, rather than using a single spatial characteristic of the texture. In this paper, four textural features: content, coarseness, contrast, and directionality (including horizontal and vertical), are considered for generating the MCs. In order to evaluate the obtained MCs, we conduct classification by using both remotely sensed hyperspectral and polarimetric synthetic aperture radar (SAR) scenes, showing the capacity of the proposed method to deal with different kinds of remotely sensed images. The obtained results indicate that the proposed MMCA framework can lead to very good classification performances in different analysis scenarios with limited training samples. [ABSTRACT FROM PUBLISHER]

This paper deals with spatial analysis of texture in synthetic aperture radar (SAR) images. A new parametric model for local two-point statistics of the image is introduced, in order to characterize the spatially nonstationary and anisotropic behavior of the image. The texture is first modeled by a nonstationary Gaussian process resulting from the convolution of a Gaussian white noise with a field of anisotropic Gaussian kernel with spatially varying parameters. Hence, under the hypothesis of locally stationary signal, the analytic expression of the local autocovariance is derived. It is then explained how to simulate nonstationary K-distributed random fields by combining the new model with an already existing simulation method. A method for parameter estimation is then introduced. This method, based on the statistical product model, first corrects the speckle contribution to the local autocovariance and estimates the parameters of the model by analyzing the shape of the autocovariance. The algorithm is then evaluated over simulated and experimental data. Stationary simulations permit to show that, for a sufficient sample size, the estimator is unbiased. A test over a nonstationary simulation proves the ability of the algorithm to capture the spatial fluctuations of the texture. Finally, the method is applied to the experimental SAR data, and it is shown that a large amount of spatial information may be retrieved from the data. [ABSTRACT FROM AUTHOR]

We address the problem of efficiency in texture analysis for synthetic aperture radar (SAR) imagery. Motivated by the statistical occupancy model, we introduce the notion of patch reoccurrences. Using the reoccurrences, we propose the use of approximate textural features in analysis of SAR images. We describe how the proposed approximate features can be extracted for two popular texture analysis methods•the grayalevel cooc-currence matrix and Gabor wavelets. Results on image texture classification show that the proposed method can provide an improved efficiency in the analysis of SAR imagery, without introducing any significant degradation in the classification results. [ABSTRACT FROM AUTHOR]

A multisensor data fusion algorithm based on a multilayer neural network is presented for sea ice classification in the winter period. The algorithm uses European Remote Sensing (ERS), RADARSAT synthetic aperture radar (SAR), and low-resolution television camera images and image texture features. Based on a set of in situ observations made at the Kara Sea, a neural network is trained, and its structure is optimized using a pruning method. The performance of the algorithm with different combinations of input features (sensors) is assessed and compared with the performance of a linear discriminant analysis (LDA)-based algorithm. We show that for both algorithms a substantial improvement can be gained by fusion of the three different types of data (91.2% for the neural network) as compared with single-source ERS (66.0%) and RADARSAT (70.7%) SAR image classification. Incorporation of texture increases classification accuracy. This positive effect of texture becomes weaker with increasing number of sensors (from 8.4 to 6.4 percent points for the use of two and three sensors, respectively). In view of the short training time and smaller number of adjustable parameters, this result suggests that semiparametric classification methods can be considered as a good alternative to the neural networks and traditional parametric statistical classifiers applied for the sea ice classification. [ABSTRACT FROM AUTHOR]

The thermal noise-induced distortions in a Sentinel-1 terrain observation with progressive scans synthetic aperture radar image cannot be corrected by the noise equivalent sigma nought (NESZ) subtraction only. Since the thermal noise is scaled during synthetic aperture radar processing, it resides not only as an additive noise in each pixel but also as a multiplicative noise in the interpixel contrast. In this paper, we investigate the noise characteristics and propose an efficient method for the multiplicative textural noise correction. The core ideas are to find the optimal coefficient of the noise-induced standard deviation (SD) and model the noise contribution to the local SD as a function of the NESZ and the signal-to-noise ratio. Denoising is accomplished by a subwindow-wise adaptive rescaling of the pixel values. The improvements in the first- and second-order statistical textural features demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper considers edge interval estimation between two regions of a synthetic aperture radar (SAR) image, which differ in texture. This is a difficult task because SAR images are contaminated with speckle noise. Different point estimation strategies under multiplicative noise are discussed in the literature. It is important to assess the quality of such point estimates and to also perform inference under a given confidence level. This can be achieved through interval parameter estimation. To that end, we propose bootstrap-based edge confidence interval. The relative merits of the different inference strategies are compared using Monte Carlo simulation. The results show that interval edge estimation can be used to assess the accuracy of an edge point estimate. They also show that interval estimates can be quite accurate and that they can indicate the absence of an edge. In order to illustrate interval edge estimation, we also analyze a real data set. [ABSTRACT FROM PUBLISHER]

Polarimetric synthetic aperture radar (PolSAR) data are used extensively for terrain classification applying SAR features from various target decompositions and certain textural features. However, one source of information has so far been neglected from PolSAR classification: Color. It is a common practice to visualize PolSAR data by color coding methods and thus, it is possible to extract powerful color features from such pseudocolor images so as to provide additional data for a superior terrain classification. In this paper, we first review previous attempts for PolSAR classifications using various feature combinations and then we introduce and perform in-depth investigation of the application of color features over the Pauli color-coded images besides SAR and texture features. We run an extensive set of comparative evaluations using 24 different feature set combinations over three images of the Flevoland- and the San Francisco Bay region from the RADARSAT-2 and the AIRSAR systems operating in C- and L-bands, respectively. We then consider support vector machines and random forests classifier topologies to test and evaluate the role of color features over the classification performance. The classification results show that the additional color features introduce a new level of discrimination and provide noteworthy improvement in classification performance (compared with the traditionally employed PolSAR and texture features) within the application of land use and land cover classification. [ABSTRACT FROM PUBLISHER]

In this paper, an efficient algorithm for texture recognition of synthetic aperture radar (SAR) images is developed based on wavelet transform as a feature extraction tool and support vector machine (SVM) as a classifier. SAR image segmentation is an important step in texture recognition of SAR images. SAR images cannot be segmented successfully by using traditional methods because of the existence of speckle noise in SAR images. The algorithm, proposed in this paper, extracts the texture feature by using wavelet transform; then, it forms a feature vector composed of kurtosis value of wavelet energy feature of SAR image. In the next step, segmentation of different textures is applied by using feature vector and level set function. At last, an SVM classifier is designed and trained by using normalized feature vectors of each region texture. The testing sets of SAR images are segmented by this trained SVM. Experimental results on both agricultural and urban SAR images show that the proposed algorithm is effective for classification of different textures in SAR images, and it is also insensitive to the intensity. [ABSTRACT FROM AUTHOR]

Speckle hinders information in synthetic aperture radar (SAR) images and makes automatic information extraction very difficult. The Bayesian approach allows us to perform the despeckling of an image while preserving its texture and structures. This model-based approach relies on a prior model of the scene. This paper presents an evaluation of two despeckling and texture extraction model-based methods using the two levels of Bayesian inference. The first method uses a Gauss-Markov random field as prior, and the second is based on an auto-binomial model (ABM). Both methods calculate a maximum a posteriori and determine the best model using an evidence maximization algorithm. Our evaluation approach assesses the quality of the image by means of the despeckling and texture extraction qualities. The proposed objective measures are used to quantify the despeckling performances of these methods. The accuracy of modeling and characterization of texture were determined using both supervised and unsupervised classifications, and confusion matrices. Real and simulated SAR data were used during the validation procedure. The results show that both methods enhance the image during the despeckling process. The ABM is superior regarding texture extraction and despeckling for real SAR images. [ABSTRACT FROM AUTHOR]

In our previous regression model for estimating forest biomass, it was shown that non-Gaussian amplitude fluctuations in high-resolution polarimetric synthetic aperture radar (SAR) data of coniferous forests can accurately be described by the K-distribution and that the order parameter of the K-distribution can be useful in estimating the tree biomass of coniferous forests from L-band cross-polarization amplitude images in a wider range than the conventional method using the radar cross section alone. The result was based on the analysis of the "ground-truth" biomass data of 19 forest stands and airborne polarimetric interferometric SAR L-band data over the Tomakomai forests in Hokkaido, Japan. From this relation, an empirical regression model was developed to estimate forest biomass from SAR data. In this paper, we report the results on further analyses of this regression model. The validity of the K-distribution is first reconfirmed using the Akaike information criterion, followed by the description on the accuracy of the model. To examine model accuracy, we carried out further field measurements on 22 forest stands in 2005, and the ground survey was made in 2006 to find out the causes of several anomalous data. Based on a comparison of the model-based biomass and the ground-truth data, the accuracy of the model was found to be approximately 86%. The regression model was then updated for practical application in estimating the biomass of the Hokkaido forests by including the ground-truth data of all 41 forest stands. [ABSTRACT FROM AUTHOR]