Search

This article reports the yield estimation of vineyards from using a mobile millimeter-wave radar system. The proximal radar sensor is a 122-GHz FM-CW radar mounted on a rover that moves along the furrows between vine plants. The proposed yield estimation is based on the classification of radar echoes measured for various grape varieties, for different meteorological conditions, and at different stages of grape development. As yield estimation errors are found to be lower than 10%, the proposed radar technique is suitable for precision viticulture applications. [ABSTRACT FROM AUTHOR]

Forward-looking multichannel synthetic aperture radar (FLMC-SAR) is an important tool for modern remote sensing applications, which has the capability to reconstruct the high-resolution image of the front area. However, due to the azimuth-variant characteristics of the motion errors over a long aperture, FLMC-SAR data processing is usually a challenging task, especially when involving the motion compensation (MOCO) coupled with Doppler ambiguity resolving. To accomplish an accurate MOCO for FLMC-SAR, a novel parametric azimuth-variant MOCO approach is proposed in this article. Aiming at the coupling problem of MOCO and Doppler ambiguity resolving over the full aperture, we can decouple them through the subaperture division. As a full synthetic aperture is decomposed into several subapertures, the high-order motion errors of the full aperture can be decomposed into the first-order motion errors of the subaperture. On this basis, the mismatch of the space–time spectrum caused by the motion errors can be solved by spectral estimation, yielding Doppler ambiguity resolving for each subaperture. Meanwhile, the azimuth-variant characteristic of motion errors in FLMC-SAR system is characterized by a parametric angle-dependent quadratic phase error (QPE) model. The motion parameters are estimated by a joint multichannel angle estimation-based signal quadratic decomposition method. Immediately, the MOCO for ambiguous targets with different motion errors can be processed separately to improve the imaging performance. Experimental results based on both simulated and real data demonstrate that the proposed method is suitable for FLMC-SAR system. [ABSTRACT FROM AUTHOR]

In this paper, monitoring of metal-cased oil wells using the ultrawideband (UWB) radar is proposed. The inspection includes the detection and imaging of perforations and corroded areas in a metal pipe. Detection of small anomalies/ perforations on the surface of a narrow metal pipe is very challenging. Here, we present a method for imaging such small anomalies based on the extra time delay of the reflected pulse due to the effect of perforation in the radar near field. In this paper, the necessary concepts for the use of UWB radar specified for this application are developed and proved based on different measurement and simulation scenarios. We have experimentally demonstrated the effect of the perforations’ size on the time delay of reflected pulses. The distance between the perforation and the radar, for the near-field phenomenon, is critical for an effective detection and imaging. Therefore, we also studied the optimal distance between the radar and the perforation. Perforations with a size range of 1–3 cm are considered for the experiments and simulations. The experiments are done both in air and diesel. Synthetic aperture radar processing is used to reconstruct the images of the perforations and corroded area. Measurement and simulation results demonstrate the potential of UWB radar systems for oil well monitoring applications. [ABSTRACT FROM AUTHOR]

Accurate information about ocean surface currents is of high importance for many purposes. Traditional ways of measuring surface currents using instruments immersed in water are associated with various challenges, as well as high installation and maintenance costs. Algorithms and hardware used to measure surface currents based on marine X-band radar images have been steadily improved during the recent decades. Such systems can now provide the user with current measurements with high accuracy in local areas of interest and with no need for underwater equipment, both from fixed sites and from moving installations, such as vessels. The primary focus of the work presented in this paper is to examine the measurement accuracy of an X-band radar-based system. For this purpose, field trials have been arranged and data acquired from a fixed platform in the North Sea in November 2015 and December 2015 and from a research vessel in the Norwegian Sea and the Barents Sea in November 2016. Data are analyzed, measured time series are compared to reference measurements and tidal current models, and statistical estimates of the measurement accuracy are calculated. Root-mean-square measurement errors of 0.032 m/s and 9.1° for magnitude and direction, respectively, are estimated for the fixed installation. Correlation coefficients are 0.93 and 0.94 for east–west and north–south components, respectively. A pooled standard deviation of 0.059 m/s is estimated for the moving installation. [ABSTRACT FROM AUTHOR]

This paper presents a novel automatic real-time remote sensing algorithm that uses radar images and global positioning satellite system measurements to estimate the ice-drift velocity vector in a region around a free-floating and potentially moving vessel. It is motivated by the low image frequency of satellite systems together with the inconvenience of deploying and retrieving ice trackers (beacons) on the ice. The algorithm combines radar image processing with two Kalman filters to produce the estimated local drift vector decoupled from the ship motion. The proposed design is verified using a full-scale data set from an ice management operation north of Svalbard in 2015. It is found that the performance of the algorithm is comparable with that of trackers on the ice. [ABSTRACT FROM AUTHOR]

The rising food demand requires regular agriculture land-cover updates to support food security initiatives. Agricultural areas undergo dynamic changes throughout the year, which manifest varying radar backscatter due to crop phenology. Certain crops can show similar backscatter if their phenology intersects, but vary later when their phenology differs. Hence, classification techniques based on single-date remote sensing images may not offer optimal results for crops with similar phenology. Moreover, methods that stack images within a cropping season as composite bands for classification limit discrimination to one feature space vector, which can suffer from overlapping classes. Nonetheless, phenology can aid classification of crops, because their backscatter varies with time. This paper fills this gap by introducing a crop sequence-based ensemble classification method where expert knowledge and TerraSAR-X multitemporal image-based phenological information are explored. We designed first-order and higher order dynamic conditional random fields (DCRFs) including an ensemble technique. The DCRF models have a duplicated structure of temporally connected CRFs, which encode image-based phenology and expert-based phenology knowledge during classification. On the other hand, our ensemble generates an optimal map based on class posterior probabilities estimated by DCRFs. These techniques improved crop delineation at each epoch, with higher order DCRFs (HDCRFs) giving the best accuracy. The ensemble method was evaluated against the conventional technique of stacking multitemporal images as composite bands for classification using maximum likelihood classifier (MLC) and CRFs. It surpassed MLC and CRFs based on class posterior probabilities estimated by both first-order DCRFs and HDCRFs. [ABSTRACT FROM PUBLISHER]

Radiometric correction of radar images is essential to produce accurate estimates of biophysical parameters related to forest structure and biomass. We present a new algorithm to correct radiometry for 1) terrain topography and 2) variations of canopy reflectivity with viewing and tree-terrain geometry. This algorithm is applicable to radar images spanning a wide range of incidence angles over terrain with significant topography and can also take into account aircraft attitude, antenna steering angle, and target geometry. The approach includes elements of both homomorphic and heteromorphic terrain corrections to correct for topographic effects and is followed by an additional radiometric correction to compensate for variations of canopy reflectivity with viewing and tree-terrain geometry. The latter correction is based on lookup tables and enables derivation of biophysical parameters irrespective of viewing geometry and terrain topography. We evaluate the performance of the new algorithm with airborne radar data and show that it performs better than classical homomorphic methods followed by cosine-based corrections. [ABSTRACT FROM PUBLISHER]

In this paper, the retrieval of sea surface current velocity from vertically polarized (V-pol) X-band marine radar data is presented. Three different methods, including the iterative least square approach, the normalized scalar product method, and the polar current shell algorithm, that have been used for horizontally polarized data are employed here. A comprehensive comparison of the performance of the three methods is conducted using the radar images collected by the V-pol radar deployed on the Forschungsplattformen in Nord- und Ostsee No. 3 (FINO3) offshore research platform and the acoustic Doppler current profiler (ADCP) data in the North Sea. The results indicate that all three methods are capable of providing reliable current speed and direction measurements from V-pol data, with similar performance. Based on the experimental data for which the current magnitude is less than 0.5 m/s, the radar-derived results agree best with the ADCP data at a depth of 6–8 m, with the root mean square difference for current velocity $x$- and $y$-components being 7.2–8.9 cm/s. The correlation coefficients between the radar-derived and ADCP-measured current velocity components are as high as 0.87–0.93. [ABSTRACT FROM AUTHOR]

Microwave remote sensing instruments detect and image physical phenomena such as brightness temperature and volume reflectivity. The spatial resolution of these measurements is limited by the physical properties of the instrument such as the antenna size, the spatial scan pattern, and temporal sampling. Analysis shows that common sampling schemes undersample the spatial information present at the antenna. Here, we address methods to better capture the spatial information available by applying the Nyquist–Shannon sampling theory to the spatial averaging and sampling of remote sensing data. The use of overlapping windows for spatial averaging rather than treating pixels independently improves the image fidelity while maintaining the system sensitivity. Additionally, the sensitivity to spatially small targets can be maximized by matching the window shape to the antenna pattern. The spatial imaging of scanning radiometers, radars, and phased-array systems is addressed. These principles are demonstrated with the theory and data from the National Aeronautics and Space Administration Goddard Space Flight Center's High-Altitude Imaging Wind and Rain Airborne Profiler (HIWRAP) radar. [ABSTRACT FROM PUBLISHER]

This paper analyzes the multiangle imaging results for bistatic synthetic aperture radar (BSAR) based on global navigation satellite systems (GNSS-BSAR). Due to the shortcoming of GNSS-BSAR images, a multiangle observation and data processing strategy based on BeiDou-2 navigation satellites was put forward to improve the quality of images and the value of system application. Twenty-six BSAR experiments were conducted and analyzed in different configurations. Furthermore, a region-based fusion algorithm using region-of-interest (ROI) segmentation was proposed to generate a high-quality fusion image. Based on the fusion image, typical targets such as water area, vegetation area, and artificial targets were compared and interpreted among single/multiple-angle images. The results reveal that the multiangle imaging method was a good technique to enhance image information, which might extend the applications of GNSS-BSAR. [ABSTRACT FROM PUBLISHER]

This paper describes a new approach for forming change images from multistatic radar data based on compressive sensing (CS). Broadly speaking, change images are naturally sparse in the raw image domain, which suggests a CS reconstruction method. Recent results show that the sparsity of the estimand dictates the number of samples required for faithful reconstruction, meaning a change image can be formed with far fewer measurements than used for conventional radar imaging. Our application has a small number of antennas arranged around the perimeter of a surveillance region, which provide large angular diversity but very poor angular sampling. Furthermore, due to application constraints, the scene is interrogated with limited frequency diversity. We aim to construct a high-resolution change image from the measurements, which are sub-Nyquist both spatially and in frequency. This paper first develops a radar imaging model in the context of CS, and then shows with collected data that a sparseness model improves image utility over conventional methods in our setting. [ABSTRACT FROM AUTHOR]

This paper proposes a new method for the classification of synthetic aperture radar (SAR) images based on a novel feature vector. The method aims at combining the intensity information of pixels with spatial information and structural relationships. Unlike classical approaches which define a static neighborhood via a rectangular moving window of predefined size and relate spatial information for each center pixel to all the pixels within that window, the local primitives (LPs) proposed in this study provide us with an adaptive neighborhood so that spatial information for each center pixel is extracted only from the related pixels in its neighborhood. LPs correspond to local homogeneous connected components that describe the pixel neighborhood more consistently than the fixed size window approach. A feature vector, called as the LP pattern (LPP), is constructed for each pixel. The feature vector includes information about the sizes, intensity levels, and contrast differences of LPs within a disk whose center is the pixel under consideration as well as the repetitive frequency of LPs outside that disk. Finally, a kernel-based support vector machine is used with the proposed feature vectors for the classification of SAR images. Experimental analysis presents that the new feature extraction technique is well suited to depict spatial information and structural relationships and it yields promising results for the classification of SAR images when compared to common features such as gray-level co-occurrence matrix and Gabor coefficients. [ABSTRACT FROM PUBLISHER]

A contrast-based phase calibration algorithm for digital beamforming remote sensing radars using three contrast metrics is presented. The algorithm corrects time-varying antenna array phase errors that defocus digital beamforming remote sensing radar imagery. Amplitude errors are treated by equalizing the received powers in all elements. As such, the algorithm does not produce an absolute (or radiometric) calibration vector for the array. The performance of the algorithm is studied using a combination of simulated and real radar data under various conditions and is compared with a clutter-based calibration algorithm. An analytical proof showing that maximizing the expected value of the 4-norm metric is equivalent to phase-calibrating the image, except for a linear phase offset, is provided. We find that the clutter calibration algorithm performs best for statistically homogeneous scenes but that the contrast-calibration algorithms perform better with scenes with larger contrast ratios. [ABSTRACT FROM PUBLISHER]

We consider sparsity-driven change detection (CD) for human motion indication in through-the-wall radar imaging and urban sensing applications. Stationary targets and clutter are removed via CD, which converts a populated scene into a sparse scene of a few human targets moving inside enclosed structures and behind walls. We establish appropriate CD models for various possible human motions, ranging from translational motions to sudden short movements of the limbs, head, and/or torso. These models permit scene reconstruction within the compressive sensing framework. Results based on laboratory experiments show that a sizable reduction in the data volume is achieved using the proposed approach without a degradation in system performance. [ABSTRACT FROM PUBLISHER]

Radar imaging of deserts suffers from insufficient radar backscatter at low microwave frequencies due to the low permittivity of dry sand and relatively smooth sand surface roughness. Operating at millimeter-wave (MMW) frequencies, however, rectifies this deficiency as significant radar backscatter is generated by surface and volume scattering. This is due to the fact that sand surface roughness is electrically large and signal penetration into the dry sand, which is a homogeneous mixture of air and sand particles with dimensions comparable to a fraction of a wavelength, generates considerable volume scattering. This paper investigates both surface and volume scattering from dry sand surfaces, subject to the peculiar physical properties of sand surfaces found in sand dune-covered regions. An incoherent model is proposed that characterizes the angular dependence of volume scattering from dry sand in the presence of a 1-D rippled air/sand surface. A set of indoor experiments conducted on smooth and 1-D rippled sand surfaces at Ka-band confirms that significant volume scattering is present at MMW frequencies and that the proposed model correctly captures the observed angular dependence when 1-D surface ripples are present. [ABSTRACT FROM AUTHOR]

We consider the problem of through-the-wall radar imaging (TWRI), in which polarimetric imaging is used for automatic target detection. Two generalized statistical detectors are proposed which perform joint detection and fusion of a set of multipolarization radar images. The first detector is an extension of a previously proposed iterative target detector for multiview TWRI. This extension allows the detector to automatically adapt to statistics that may vary, depending on target locations and electromagnetic-wave polarizations. The second detector is based on Bayes' test and is of interest when target pixel occupancies are known from, e.g., secondary data. Properties of the proposed detectors are delineated and demonstrated by real data measurements using wideband sum-and-delay beamforming, acquired in a semicontrolled lab environment. We examine the performance of the proposed detectors when imaging both metal objects and humans. [ABSTRACT FROM AUTHOR]

The most intuitive way to extract depth information from remote sensing images is stereogrammetry, in which a digital elevation model (DEM) is achieved by computing stereoscopic radar images. When only the amplitude of the radar images is considered, this computation is called radargrammetry. The main idea of which is to match stereopair radar images in order to create a disparity map from one image to the other and, finally, to compute the elevation. Therein, we present our studies on the extraction of 3-D information from radar images. We examine a way to produce a DEM of a challenging area of the French Alps. The central issue of this paper concerns improvements for radargrammetric synthetic aperture radar image processing for high-relief reconstruction, and we focus on the matching step, which is one of the most important points of the radargrammetric processing. Thus, we propose original methods using different correlation windows. On the one hand, we take the advantages of a multiwindow approach to combine relevant information by multiplying the correlation surfaces obtained for each correlation window size during the matching operation. On the other hand, the second improvement is based on the expansion of windows on foreshortened areas, particularly because of the side-looking radar view. These methods allow us to achieve reliable image matching and to improve the accuracy of the DEM. [ABSTRACT FROM AUTHOR]

A detector of targets behind walls and in enclosed structures is presented. The detector is applied to through-the-wall radar images obtained by wideband delay and sum beamforming. We consider the detection problem using single- and multiple-view imaging. The statistics of noise, clutter, and target images are examined and formulated using sample scenes. The effects of wall parameter errors on the image statistics are shown. An iterative detection scheme, which adapts itself to the image statistics, is presented. The proposed detection schemes are evaluated using real data. [ABSTRACT FROM AUTHOR]