Search

In practical microgrids, the inhomogeneous initial values are widely appeared due to soft-starting operation. If traditional model order reduction approaches are applied, the input-output maps error between the original system and reduced-order system is large. To address this problem, this paper proposes a reduced-order aggregate model based on balanced truncation approach to provide the preprocessing approach for the real-time simulation of large-scale converters with inhomogeneous initial conditions in DC microgrid. Firstly, the standard linear time-invariant model with inhomogeneous initial conditions is established through non-leader multiagents concept. To end this, it is convenient for scholars to build complex system modeling with switched topology. Furthermore, the full system is divided into two components, i.e., the unforced component with nontrivial initial conditions and forced component with null initial conditions. Moreover, this paper presents an aggregated approach that involves independent reducing component responses and combining reducing component responses. Based on this, the input-output maps error is reduced. Then, the approximated error estimate of the reduced-order aggregate model regarding large-scale converters in DC microgrid is first provided, which provides prior knowledge and theoretical basis for DC microgrid designers. Finally, the simulation results illustrate the accuracy of the proposed approach. [ABSTRACT FROM AUTHOR]

Multi-level energy management system (EMS) is proposed for dc microgrids operations to ensure system reliability, power quality, speed of response, and control accuracy in this paper. System distributed control is scheduled as the primary control. Battery energy storages (BESs) operate in voltage regulation mode with droop control for power sharing. However, bus voltage deviation and power tracking error due to line impedance are the main drawbacks of distributed control. To enhance the system power quality and control accuracy, bus voltage restoration and power sharing compensation are implemented in secondary control. Economic dispatch based on comparison of system units' marginal operation costs is carried out in tertiary control to minimize the system operation cost. Detailed elaboration has been derived to quantify BES utilization cost due to the cumulated lifetime degradation. In case of communication failure, system operation can still be retained with primary control without operating mode change so that to enhance system reliability. A lab scale dc microgrid is developed for the verification of the proposed multi-level EMS and relevant control techniques. [ABSTRACT FROM PUBLISHER]

Multiple-voltage-region control, in which the bus-voltage range is divided into several regions, is usually implemented for dc microgrid operation in distributed manner. Voltage/power droop relationships are imposed for active power sharing among slack terminals. Conventionally, threshold voltages for voltage region partition are determined with fixed percentage of variation around the nominal value, which may result in unevenness of droop coefficients in different regions. If system droop coefficient is too high, significant bus-voltage step change due to load variation will occur. On the other hand, significant power sharing error among slack terminals will be induced if the droop coefficient is too low. In this paper, a compromised solution with power-capacity-based bus-voltage region partition is proposed to equalize the droop coefficients in different regions. However, the droop coefficients are determined based on the rated power capacity of system units. Bus-voltage discontinuity appears when the power capacity reduces in actual implementation. To eliminate the voltage discontinuity, online droop coefficient tuning according to the real-time power capacity is implemented. Algorithms for local power capacity estimation of solar photovoltaic (PV) and battery energy storage have been proposed. A lab-scale dc microgrid has been developed for verification of the proposed methods. [ABSTRACT FROM AUTHOR]