Search

Multi-level energy management system (EMS) is proposed for dc microgrids operations to ensure system reliability, power quality, speed of response, and control accuracy in this paper. System distributed control is scheduled as the primary control. Battery energy storages (BESs) operate in voltage regulation mode with droop control for power sharing. However, bus voltage deviation and power tracking error due to line impedance are the main drawbacks of distributed control. To enhance the system power quality and control accuracy, bus voltage restoration and power sharing compensation are implemented in secondary control. Economic dispatch based on comparison of system units' marginal operation costs is carried out in tertiary control to minimize the system operation cost. Detailed elaboration has been derived to quantify BES utilization cost due to the cumulated lifetime degradation. In case of communication failure, system operation can still be retained with primary control without operating mode change so that to enhance system reliability. A lab scale dc microgrid is developed for the verification of the proposed multi-level EMS and relevant control techniques. [ABSTRACT FROM PUBLISHER]

Economic operation is a major concern for microgrids (MGs). System operation cost is optimized when the incremental costs (ICs) of all distributed generators (DGs) reach equality. Conventionally, economic dispatch of DGs is solved by centralized control with optimization algorithms or distributed control with consensus algorithms. To improve the reliability, scalability, and economy of MGs, a fully decentralized economic power sharing strategy is proposed in this paper. As frequency is a global state in ac MG and dc bus voltage serves as a natural indicator in dc MG, a frequency-IC droop scheme is proposed for ac MG, a voltage-IC droop scheme is proposed for dc MG, and a normalization scheme is proposed for hybrid ac/dc MG. By using the proposed technique, ICs of DGs reach equality with the convergence of the system global indicator (frequency or dc bus voltage). Then power sharing of each DG is automatically achieved based on its relevant IC function and the total operating cost can be optimized without any communication or central controllers. The proposed approach is implemented in an ac MG, a dc MG, and a hybrid ac/dc MG in MATLAB/Simulink to verify its effectiveness. [ABSTRACT FROM AUTHOR]

State-of-charge (SoC) imbalance and bus voltage deviation are two of the main problems in autonomous dc microgrids. Based on this concern, this paper presents an improved dual-quadrant SoC weighted control strategy and a distributed optimization control method to achieve SoC balance, ensuring accurate power-sharing and bus voltage recovery. Firstly, this paper couples the injected/released power with the current SoC and observed average SoC value to weight the droop coefficient, which is based on the charge/discharge mode for the energy storage system. Then a secondary controller is designed based on distributed optimal control to eliminate the bus voltage deviation caused by the line impedance difference. The proposed optimal control method optimizes the average bus voltage to the nominal value and achieve accurate power-sharing by constructing the correlated variables and voltage independent intermediate variables exchanged among bulk energy storage units (ESUs). Since the voltage observer cannot accurately observe the true average bus voltage under the communication delay, the proposed distributed optimal control method without the voltage observer can ensure that the average bus voltage is optimized to the nominal value, thus improving the robustness of the control system. Finally, the correctness and effectiveness of the proposed method are verified in Simulink/MATLAB. [ABSTRACT FROM AUTHOR]

Multiple-voltage-region control, in which the bus-voltage range is divided into several regions, is usually implemented for dc microgrid operation in distributed manner. Voltage/power droop relationships are imposed for active power sharing among slack terminals. Conventionally, threshold voltages for voltage region partition are determined with fixed percentage of variation around the nominal value, which may result in unevenness of droop coefficients in different regions. If system droop coefficient is too high, significant bus-voltage step change due to load variation will occur. On the other hand, significant power sharing error among slack terminals will be induced if the droop coefficient is too low. In this paper, a compromised solution with power-capacity-based bus-voltage region partition is proposed to equalize the droop coefficients in different regions. However, the droop coefficients are determined based on the rated power capacity of system units. Bus-voltage discontinuity appears when the power capacity reduces in actual implementation. To eliminate the voltage discontinuity, online droop coefficient tuning according to the real-time power capacity is implemented. Algorithms for local power capacity estimation of solar photovoltaic (PV) and battery energy storage have been proposed. A lab-scale dc microgrid has been developed for verification of the proposed methods. [ABSTRACT FROM AUTHOR]

A decentralized improved I-V droop control strategy for battery-supercapacitor (SC) hybrid energy storage system (HESS) is proposed in this paper. The dynamic power sharing between battery and SC is realized by replacing the constant droop coefficient in I-V droop control with virtual impedance, i.e. virtual inductance for battery side converter and virtual resistance for SC side converter. Besides, by injecting the virtual inductance in the battery side converter, negligible DC bus voltage deviation can be achieved without extra voltage compensator. Moreover, the state-of-charge (SoC) recovery is also considered to extend the service life of the HESS. Furthermore, in the proposed regulated power system, since the power allocation, DC bus stability and SoC recovery are decoupled from each other, the design of control parameters is simple. The corresponding design guideline is demonstrated in this paper. Finally, to verify the accuracy and feasibility of the theoretical analyses, hardware in the loop simulations have been conducted. [ABSTRACT FROM AUTHOR]

In dc microgrid, energy storage system (ESS) plays a crucial role to provide short-or-long term and high-quality electric energy. The different control strategies for bidirectional dc-dc converter (BDC) of ESS in grid-tied and islanded modes pose challenges to the coordination control of the dc microgrid. This paper proposes an autonomous control scheme for the BDC in dc microgrid. The proposed control scheme is based on $V^2-P$ droop control and unifies bus voltage regulation and power regulation in a single control structure. Thus, global smooth transition between various operation modes can be achieved without any control strategy changes, which avoids various mode switch detection mechanisms and improves system stability. Furthermore, the proposed control scheme is fully decentralized which reduces the reliance on communication, and enhances the reliability of the microgrid. On the other hand, $V^2-P$ droop approach eliminates the negative effect of widespread constant power loads (CPLs) in dc microgrid. The stability of the proposed control method is illustrated, and the design guideline of some critical control gains is addressed. Finally, the effectiveness of the proposed control scheme is validated by the real-time hardware-in-loop (HIL) platform. [ABSTRACT FROM AUTHOR]

This article investigates the current sharing and voltage regulation problem of a DC microgrid by a distributed supervisory control method. In the existing secondary control methods, current sharing feedback control loop and voltage regulation feedback control loop are linearly integrated to shift the droop equation. However, the linear combination of two loops may easily offset the control effect of each other, as the control dimension is less than the objective dimension. This fact motivates us to design a distributed supervisory secondary control (DSSC) scheme to achieve a more flexible configuring of each converter. The DSSC consists of two candidate controllers and a supervisor. The two controllers refer to current sharing configuring and DC bus voltage regulation respectively, and the supervisor is to orchestrate the switching between candidate controllers based on the system environment of DC microgrid. Under the proposed DSSC, each converter selects to configure the current sharing or regulates the DC bus voltage according to its need. Theoretical stability analysis is rigorously conducted. Finally, both simulation and experiment results are presented to demonstrate the effectiveness of DSSC. [ABSTRACT FROM AUTHOR]