Search

The inner area close to cap and pin of insulator is sometimes heavier polluted than the outer area, causing the contamination pattern on insulator surface look like ring-shape. This kind of non-uniform pollution may affect insulator flashover voltage. In this paper, artificial pollution tests of 4 types of porcelain and glass insulators with ring-shaped non-uniform pollution were carried out. Experimental results indicate that the SDD (salt deposit density), the non-uniform pollution degree K (the SDD ratio of inner part to outer part), the heavily polluted area with radius r, and the insulator profile all have significant effects on insulator flashover performance. The effects of K and r on flashover performance can be reflected by the change of pollution layer conductivity during flashover. Under ring-shaped non-uniform pollution, the relationship between Uso and SDD can still be expressed by negative power function, while coefficient a varies obviously with pollution non-uniformity, but exponent n does not. Finally the correction coefficients of flashover voltage considering non-uniform pollution degree K were also calculated for outdoor insulation design. [ABSTRACT FROM AUTHOR]

The bare conductor in switchgear constitutes complicated air gaps, and their AC withstand characteristic will obviously affect switchgear insulation performance. In this paper, AC withstand tests of various types of air gap were carried out. The air gap samples were rod-plane air gap and 4 typical types of air gap from the bus chamber of 40.5 kV metal-enclosed switchgear. The samples were tested in climate chamber where high altitude environment was simulated. And correction of withstand voltage for switchgear air gaps at low air pressure were conducted. Test results indicate that, the withstand characteristic of 4 typical types of air gap in switchgear are different from that of rod-plane air gap. The relationship between withstand voltage Uw and air gap distance d is nonlinear. The influencing characteristic exponent n of air pressure on Uw is related with air gap type. Linearity value m and air pressure index n are independent to some degree. An equation was proposed to express the relationship of Uw with air gap distance d and altitude H, and this equation can be used to calculate the safety distance of air gaps in switchgear under low air pressure situations. The results are significant for the design and selection of switch devices. [ABSTRACT FROM PUBLISHER]