Search

This work assesses the initial and crucial part of electrical treeing degradation, the inception stage, focusing on its dependence on applied voltage waveform and frequency. Tests have been performed on needle-plane configuration samples in solids and gels. A physical model has been formulated through an adaptation of an established theory for solids in which electrical tree inception is related to damage-producing injection currents. The voltage rise time appeared to be the most important parameter influencing the tree inception in the gel, while in the solid material the frequency is more relevant. The analysis leads to the conclusion that tree inception in gels is due to a single high-energy event, in contrast to what is commonly known for solids where damage accumulation takes place. A tree inception model is proposed for the gel, in which initiation is driven by a pressure wave generated by the electric field and the space charge injected into the sample. The model fits the experimental data and may be used to predict the tree initiation for different waveforms and voltage values. [ABSTRACT FROM AUTHOR]

In this work, we compare the dielectric withstand performance of nanofluids prepared using Shell Diala D as a base fluid, and magnetite, graphene oxide and silicone dioxide as nanoadditives. The ac withstand capability of the nanofluids was investigated as well as partial discharge inception voltage, partial discharge and repetition rate under ac, dc positive and dc negative voltages. The results indicate that, for all nanofluids, nanoparticle concentrations around 0.2 g/l enhance dielectric withstand properties under quasi uniform fields. Under divergent fields, partial discharge characteristics are improved under ac conditions. Under dc conditions silica nanofluid performs better than mineral oil, but the other two nanofluids do not perform well. [ABSTRACT FROM AUTHOR]

Presents a study that investigated the effectiveness of inference method for the diagnosis of solid insulation systems, based on Partial Discharge measurements. Theoretical background; Methodology; Results and discussion.

Illustrates a model that enables the estimation of life of polymeric insulation subjected to direct current stress, both in the presence and in the absence of voltage polarity inversions. Derivation of model parameters; Characteristics of the general life model; Probabilistic framework of the model.

In the framework of developing defect-based life models, in which breakdown is explicitly associated with partial discharge (PD)-induced damage growth from a defect, ageing tests and PD measurements were carried out in the laboratory on polyethylene (PE) layered specimens containing artificial cavities. PD activity was monitored continuously during aging. A quasi-deterministic series of stages can be observed in the behavior of the main PD parameters (i.e. discharge repetition rate and amplitude). The evolution of the parameters reflects the physicalchemical changes taking place at the dielectric/cavity interface during the aging process. PD activity shows similar time behavior under constant cavity gas volume and constant cavity gas pressure conditions, suggesting that the variation of PD parameters may not be attributed to the variation of the gas pressure. It is speculated that the change of PD activity is related to the composition of the cavity gas, as well as to the properties of dielectric/cavity interface. [ABSTRACT FROM AUTHOR]

The aim of this paper is to infer partial discharge (PD) detection limits in extruded cables as a function of the distance between PD source and detection point. The investigation is carried out for different types of detectors, from IEC 60270-compliant to ultra-wide bandwidth systems. For this purpose, a medium voltage cable has been modeled as a transmission line with frequency-dependent parameters accounting for skin effect, dielectric and semicon characteristics. Pulse propagation through the cable has been predicted for very tong distances. Different filters have been used to simulate different detectors, emphasizing the behavior of these systems, particularly the features of sensitivity, noise rejection, PD source separation and PD source localization. [ABSTRACT FROM AUTHOR]