Search

Imperfect Channel State Information at the Transmitter (CSIT) is inevitable in modern wireless communication networks, and results in severe multi-user interference in multi-antenna Broadcast Channel (BC). While the capacity of multi-antenna (Gaussian) BC with perfect CSIT is known and achieved by Dirty Paper Coding (DPC), the capacity and the capacity-achieving strategy of multi-antenna BC with imperfect CSIT remain unknown. Conventional approaches therefore rely on applying communication strategies designed for perfect CSIT to the imperfect CSIT setting. In this work, we break this conventional routine and make two major contributions. First, we show that linearly precoded Rate-Splitting (RS), relying on the split of messages into common and private parts and linear precoding at the transmitter, and successive interference cancellation at the receivers, can achieve larger rate region than DPC in multi-antenna BC with partial CSIT. Second, we propose a novel scheme, denoted as Dirty Paper Coded Rate-Splitting (DPCRS), that relies on RS to split the user messages into common and private parts, and DPC to encode the private parts. We show that the rate region of DPCRS in Multiple-Input Single-Output (MISO) BC with partial CSIT is enlarged beyond that of conventional DPC and that of linearly precoded RS. Gaining benefits from the capability of RS to partially decode the interference and partially treat interference as noise, DPCRS is less sensitive to CSIT inaccuracies, networks loads and user deployments compared with DPC and other existing transmission strategies. [ABSTRACT FROM AUTHOR]

We propose a robust close-to-capacity dirty-paper coding (DPC) design framework in which multi-level low density parity check (LDPC) codes and trellis coded quantization (TCQ) are employed as the channel and source coding components, respectively. The proposed design framework is robust in the sense that it yields close to capacity solutions in the high-, medium-, and low-rate regimes. This is in contrast to existing practical DPC schemes that perform well only in one or two of these regimes, but not all three. We design codes for transmission rates of 0.5, 1.0, 1.5, and 2.0 bits/sample (b/s) using one, two, three, and four LDPC levels; at a block length of 2x 10^5, the codes perform 0.95, 0.58, 0.55, and 0.54 dB from the corresponding information theoretic limits, respectively. We also propose a low-complexity decoding scheme that does not involve iterative message passing between the source and channel decoders; the low-complexity scheme performs only 1.08, 0.85, and 0.79 dB away from the theoretical limits at transmission rates of 1.0, 1.5, and 2.0 b/s, respectively. [ABSTRACT FROM AUTHOR]

We consider precoder design for maximizing the weighted sum rate (WSR) of successive zero-forcing dirty paper coding (SZF-DPC). For this problem, the existing precoder designs often assume a sum power constraint (SPC) and rely on the singular value decomposition (SVD). The SVD-based designs are known to be optimal but require high complexity. We first propose a low-complexity optimal precoder design for SZF-DPC under SPC, using the QR decomposition. Then, we propose an efficient numerical algorithm to find the optimal precoders subject to per-antenna power constraints (PAPCs). To this end, the precoder design for PAPCs is formulated as an optimization problem with a rank constraint on the covariance matrices. A well-known approach to solve this problem is to relax the rank constraints and solve the relaxed problem. Interestingly, for SZF-DPC, we are able to prove that the rank relaxation is tight. Consequently, the optimal precoder design for PAPCs is computed by solving the relaxed problem, for which we propose a customized interior-point method that exhibits a superlinear convergence rate. Two suboptimal precoder designs are also presented and compared to the optimal ones. We also show that the proposed numerical method is applicable for finding the optimal precoders for block diagonalization scheme. [ABSTRACT FROM PUBLISHER]

In this paper, we present a practical method to construct dirty paper coding (DPC) schemes using sum codes. Unlike the commonly used approach to DPC where the coding scheme involves concatenation of a channel code and a quantization code, the proposed method embodies a unified approach that emulates the binning method used in the proof of the DPC result. Auxiliary bits are used to create the desired number of code vectors in each bin. Sum codes are obtained when information sequences augmented with auxiliary bits are encoded using linear block codes. Sum-code-based DPC schemes can be implemented using any linear block code, and entail a relatively small increase in decoder complexity when compared to standard communication schemes. They can also lead to significant reduction in transmit power in comparison to standard schemes. [ABSTRACT FROM AUTHOR]

This letter presents two results for multiuser wireless systems employing dirty-paper coding strategies along with greedy scheduling over the broadcast multiple-input multiple-output channel. Specifically, an efficient and suboptimal downlink scheduler is proposed to approximate the maximum sum rate using equal power allocation, and it is shown to approach the maximum sum rate of optimal power allocation for a large number of users under optimal scheduling. The second result demonstrates that the average maximum sum rate can be tightly upper bounded when spatial multiplexing is maximized. [ABSTRACT FROM AUTHOR]

A memoryless bivariate Gaussian source is transmitted to a pair of receivers over an average-power limited bandwidth-matched Gaussian broadcast channel. Based on their observations, Receiver 1 reconstructs the first source component while Receiver 2 reconstructs the second source component both seeking to minimize the expected squared-error distortions. In addition to the source transmission digital information at a specified rate should be conveyed reliably to Receiver 1–the “stronger” receiver. Given the message rate we characterize the achievable distortions region. Specifically, there is an ${\sf SNR}$ -threshold below which Dirty Paper coding of the digital information against a linear combination of the source components is optimal. The threshold is a function of the digital information rate, the source correlation and the distortion at the “stronger” receiver. Above this threshold a Dirty Paper coding extension of the Tian-Diggavi-Shamai hybrid scheme is shown to be optimal. [ABSTRACT FROM AUTHOR]

In this paper, an efficient greedy scheduler for zero-forcing dirty-paper coding (ZF-DPC), which can be incorporated in complex Householder QR factorization of the channel matrix, is proposed. The ratio of the complexity of the proposed scheduler to the complexity of the channel matrix factorization required by ZF-DPC is O(M-1), while such ratio for the original greedy scheduler is O(M), where M is the number of transmitters. Therefore, the new scheduler reduces the overhead of scheduling from being the bottleneck of ZF-DPC to being negligible. [ABSTRACT FROM AUTHOR]

A dirty-paper channel is considered, where the transmitter knows the interference sequence up to a constant multiplicative factor, known only to the receiver. Lower bounds on the achievable rate of communication are derived by proposing a coding scheme that partially compensates for the imprecise channel knowledge. We focus on a communication scenario where the signal-to-noise ratio is high. Our approach is based on analyzing the performance achievable using lattice-based coding schemes. When the power of the interference is finite, we show that the achievable rate of this lattice-based coding scheme may be improved by a judicious choice of the scaling parameter at the receiver. We further show that the communication rate may be improved, for finite as well as infinite interference power, by allowing randomized scaling at the transmitter. [ABSTRACT FROM AUTHOR]

Radio Frequency IDentification (RFID) is intended to supplant legacy (optical) bar code scanning technology found in many logistic and retail applications. RFID is distinguished by inexpensive, low power and compact form factor tags, whose longevity and efficacy are predicated on using passive communication techniques and on-tag power harvesting. Such tags employ backscatter modulation, which does not require any active RF components. As a result, backscatter has become an attractive design choice for short-range communications in power constrained wireless sensor networking scenarios. The purpose of this work is two-fold. First, it aims to expose backscatter communication as an emerging topic to a communication systems-theoretic audience. Since backscatter modulation and on-tag power harvesting efficiency are coupled, it is necessary to re-examine notions of power and spectral efficiency from an energy-constraint perspective; this leads to novel coded modulation schemes for future RFID systems. Further, we investigate RFID MIMO systems where the channel fading encountered has different statistics than the classical Rayleigh fading model. In turn,the trade off between diversity order and spatial multiplexing gains are distinct from wide-area MIMO. [ABSTRACT FROM AUTHOR]

Motivated by the fact that living cells use molecular circuits (i.e., a set of chemical reactions) for information processing, this paper investigates the problem of designing molecular circuits for demodulation. In our earlier work, we use a Markovian approach to derive a demodulator for diffusion-based molecular communication. The demodulation filters take the form of an ordinary differential equation, which computes the log-posteriori probability of a transmission symbol being sent. This paper considers the realization of these demodulation filters using molecular circuits assuming the transmission symbols are rectangular pulses of the same duration but different amplitudes, i.e., concentration modulation. This paper makes a number of contributions. First, we use time-scale separation and renewal theory to analytically derive an approximation of the demodulation filter from our earlier work. Second, we present a method to turn this approximation into a molecular circuit. By using simulations, we show that the output of the derived molecular circuit is approximately equal to the log-posteriori probability calculated by the exact demodulation filter if the log-posteriori probability is positive. Third, we demonstrate that a biochemical circuit in yeast behaves similarly to the derived molecular demodulation filter and is therefore a candidate for implementing the derived filter. [ABSTRACT FROM AUTHOR]

This paper studies transmission strategies for the downlink of a cloud radio access network, in which the base stations are connected to a centralized cloud computing-based processor with digital fronthaul or backhaul links. We provide a system-level performance comparison of two fundamentally different strategies, namely, the data-sharing strategy and the compression strategy, which differ in the way the fronthaul/backhaul is utilized. It is observed that the performance of both strategies depends crucially on the available fronthaul or backhaul capacity. When the fronthaul/backhaul capacity is low, the data-sharing strategy performs better, while under moderate-to-high fronthaul/backhaul capacity, the compression strategy is superior. Using insights from such a comparison, we propose a novel hybrid strategy, combining the data-sharing and compression strategies, which allows for better control over the fronthaul/backhaul capacity utilization. An optimization framework for the hybrid strategy is proposed. Numerical evidence demonstrates the performance gain of the hybrid strategy. [ABSTRACT FROM AUTHOR]

Variable-length (VL) coding with feedback is a commonly used technique that can approach point-to-point Shannon channel capacity with a significantly shorter average codeword length than fixed-length coding without feedback. This paper uses the inter-frame coding of Zeineddine and Mansour, originally introduced to address varying channel-state conditions in broadcast wireless communication, to approach capacity on point-to-point channels using VL codes without feedback. The per-symbol complexity is comparable to decoding the VL code with feedback (plus the additional complexity of a small peeling decoder amortized over many VL codes) and presents the opportunity for encoders and decoders that utilize massive parallel processing, where each VL decoder can process simultaneously. This paper provides an analytical framework and a design process for the degree distribution of the inter-frame code that allows the feedback-free system to achieve 96% or more of the throughput of the original VL code with feedback. As examples of VL codes, we consider non-binary (NB) low-density parity-check (LDPC), binary LDPC, and convolutional VL codes. The NB-LDPC VL code with an 8-bit CRC and an average codeword length of 336 bits achieves 85% of capacity with four rounds of ACK/NACK feedback. The proposed scheme using shared incremental redundancy without feedback achieves 97% of that performance or 83% of the channel capacity. [ABSTRACT FROM AUTHOR]

The future connectivity landscape, and notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC, as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, also termed interface diversity. This paper also touches on the importance of the proper statistical methodology for designing and assessing extremely high-reliability levels. [ABSTRACT FROM AUTHOR]

This paper compares the accuracy and complexity of Raghavan and Baum’s Reliability Output Viterbi Algorithm (ROVA), Polyanskiy’s accumulated information density (AID), and Fricke and Hoeher’s lower complexity approximation of ROVA. It turns out that AID is far less accurate than ROVA in practice. This paper proposes codeword information density (CID), which modifies AID to improve its accuracy and leads to a lower-complexity implementation of ROVA. The paper includes an analytical expression for the random variable describing the correct decoding probability computed by ROVA and uses this expression to characterize how the probabilities of correct decoding, undetected error, and negative acknowledgement behave as a function of the selected threshold for reliable decoding. This paper examines both the complexity and the simulation time of ROVA, CID, AID, and the Fricke and Hoeher approximation to ROVA. This paper also derives an expression for the union bound on the frame error rate for zero-terminated trellis codes with punctured symbols and uses it to optimize the order of symbol transmission in an incremental retransmission scheme. This paper concludes by comparing the performance of an incremental retransmission scheme using ROVA as a stopping condition to one that uses a CRC as a stopping condition. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RISs) have been recently considered as a promising candidate for energy-efficient solutions in future wireless networks. Their dynamic and low-power configuration enables coverage extension, massive connectivity, and low-latency communications. Due to a large number of unknown variables referring to the RIS unit elements and the transmitted signals, channel estimation and signal recovery in RIS-based systems are the ones of the most critical technical challenges. To address this problem, we focus on the RIS-assisted wireless communication system and present two joint channel estimation and signal recovery schemes based on message passing algorithms in this paper. Specifically, the proposed bidirectional scheme applies the Taylor series expansion and Gaussian approximation to simplify the sum-product procedure in the formulated problem. In addition, the inner iteration that adopts two variants of approximate message passing algorithms is incorporated to ensure robustness and convergence. Two ambiguities removal methods are also discussed in this paper. Our simulation results show that the proposed schemes show the superiority over the state-of-art benchmark method. We also provide insights on the impact of different RIS parameter settings on the proposed schemes. [ABSTRACT FROM AUTHOR]

In one of the several manifestations, the future cellular networks are required to accommodate a massive number of devices, several orders of magnitude compared to today’s networks. At the same time, the future cellular networks will have to fulfill stringent latency constraints. To that end, one problem that is posed as a potential showstopper is extreme congestion for requesting uplink scheduling over the physical random access channel (PRACH). Indeed, such congestion drags along scheduling delay problems. In this paper, the use of self-organized device-to-device (D2D) clustering is advocated for mitigating PRACH congestion. To this end, this paper proposes two D2D clustering schemes, namely, random-based clustering and channel-gain-based clustering. Accordingly, this paper sheds light on random access within the proposed D2D clustering schemes and presents a case study based on a stochastic geometry framework. For the sake of objective evaluation, the D2D clustering is benchmarked by the conventional scheduling request procedure. Accordingly, this paper offers insights into useful scenarios that minimize the scheduling delay for each clustering scheme. Finally, this paper discusses the implementation algorithm and some potential implementation issues and remedies. [ABSTRACT FROM AUTHOR]

This paper provides an analytical performance characterization of both the uplink (UL) and downlink (DL) user-centric network multiple-input multiple-output (MIMO) systems, where a cooperating base station (BS) cluster is formed for each user individually and the clusters for different users may overlap. In this model, cooperating BSs (each equipped with multiple antennas) jointly perform zero-forcing beamforming to the set of single-antenna users associated with them. As compared with a baseline network MIMO system with disjoint BS clusters, the effect of user-centric clustering is that it improves signal strength in both the UL and DL, while reducing cluster-edge interference in the DL. This paper quantifies these effects by assuming that BSs and users form Poisson point processes and by further approximating both the signal and interference powers using Gamma distributions of appropriate parameters. We show that BS cooperation provides significant gain as compared to single-cell processing for both the UL and DL, but the advantage of user-centric clustering over the baseline disjoint clustering system is significant for the DL cluster-edge users only. Although the analytic results are derived with the assumption of perfect channel state information and infinite backhaul between the cooperating BSs, they nevertheless provide architectural insight into the design of the future cooperative cellular networks. [ABSTRACT FROM AUTHOR]

This paper considers a device-to-device (D2D) fog-radio access network wherein a set of users are required to store/receive a set of files. The D2D devices are connected to a subset of the cloud data centers and thus possess a subset of the data. This paper is interested in reducing the total time of communication, i.e., the completion time, required to disseminate all files among all devices using instantly decodable network coding (IDNC). Unlike previous studies that assume a fully connected communication network, this paper tackles the more realistic scenario of a partially connected network in which devices are not all in the transmission range of one another. The joint optimization of selecting the transmitting device(s) and the file combination(s) is first formulated, and its intractability is exhibited. The completion time is approximated using the celebrated decoding delay approach by deriving the relationship between the quantities in a partially connected network. The paper introduces the cooperation graph and demonstrates that the problem is equivalent to a maximum weight clique problem over the newly designed graph. Extensive simulations reveal that the proposed solution provides noticeable performance enhancement and outperforms previously proposed IDNC-based schemes. [ABSTRACT FROM PUBLISHER]

This paper considers a general stochastic resource allocation problem that arises widely in wireless networks, cognitive radio, networks, smart-grid communications, and cross-layer design. The problem formulation involves expectations with respect to a collection of random variables with unknown distributions, representing exogenous quantities such as channel gain, user density, or spectrum occupancy. We consider the constant step-size stochastic dual subgradient descent (SDSD) method that has been widely used for online resource allocation in networks. The problem is solved in dual domain, which results in a primal resource allocation subproblem at each time instant. The goal here is to characterize the non-asymptotic behavior of such stochastic resource allocations in an almost sure sense. It is well known that with a step size of \epsilon , SDSD converges to an \mathcal {O}(\epsilon) -sized neighborhood of the optimum. In practice, however, there exists a trade-off between the rate of convergence and the choice of \epsilon $ . This paper establishes a convergence rate result for the SDSD algorithm that precisely characterizes this trade-off. Toward this end, a novel stochastic bound on the gap between the objective function and the optimum is developed. The asymptotic behavior of the stochastic term is characterized in an almost sure sense, thereby generalizing the existing results for the stochastic subgradient methods. For the stochastic resource allocation problem at hand, the result explicates the rate with which the allocated resources become near-optimal. As an application, the power and user-allocation problem in device-to-device networks is formulated and solved using the SDSD algorithm. Further intuition on the rate results is obtained from the verification of the regularity conditions and accompanying simulation results. [ABSTRACT FROM PUBLISHER]

In this paper, we consider the problem of synchronizing two sets of data where the size of the symmetric difference between the sets is small and, in addition, the elements in the symmetric difference are related through the Hamming distance metric. Upper and lower bounds are derived on the minimum amount of information exchange. Furthermore, explicit encoding and decoding algorithms are provided for many cases. [ABSTRACT FROM AUTHOR]

The universal filtered multicarrier (UFMC) modulation is among the most considered solutions for the realization of beyond orthogonal frequency division multiplexing (OFDM) air interfaces for future wireless networks. This paper focuses on the design and analysis of a UFMC transceiver equipped with multiple antennas and operating at millimeter-wave carrier frequencies. This paper provides the full mathematical model of an MIMO-UFMC transceiver, taking into account the presence of hybrid analog/digital beamformers at both ends of the communication links. Then, several detection structures are proposed, both for the case of single-packet isolated transmission and for the case of multiple-packet continuous transmission. In the latter situation, this paper also considers the case in which no guard time among adjacent packets is inserted, trading off an increased level of interference with higher values of spectral efficiency. At the analysis stage, several considered detection structures and transmission schemes are compared in terms of bit-error rate, root-mean-square error, and system throughput. The numerical results show that the proposed transceiver algorithms are effective and that the linear minimum mean-square error (MMSE) data detector is capable of well managing the increased interference brought by the removal of guard times among consecutive packets, thus yielding throughput gains of about 10%–13%. The effect of phase noise at the receiver is also numerically assessed, and it is shown that the recursive implementation of the linear MMSE exhibits some degree of robustness against this disturbance. [ABSTRACT FROM AUTHOR]

The paper proposed a novel intelligent transmission surface (ITS) aided transmitter in an intelligent reflection surface (IRS) assisted multiuser multiple-input multiple-output (MIMO) network. The ITS deployed in the transmitter architecture can reduce the power consumption in signal beamforming at the base station (BS), and the IRS can help the information transfer from the ITS-aided transmitter to the users. We first maximize the weighted sum rate (WSR) of the users by jointly designing the beamforming vector at the BS and the phase shifts of ITS and IRS. To solve this non-convex optimization problem, we propose an effective algorithm in which the Lagrangian dual transform, the alternative optimization (AO) algorithm and the quadratic transform (QT) method are adopted to simplify the objective function. Then, the bisection search and the alternating direction method of multipliers (ADMM) algorithm are considered to design the optimal beamforming vector and phase shifts of ITS and IRS, respectively. Furthermore, the paper explores the energy efficiency (EE) maximization problem to emphasize the value of the ITS-assisted transmitter in terms of power savings. Finally, we compare the simulation results to various state-of-the-art techniques to see how much better the proposed algorithm is in terms of WSR and EE. [ABSTRACT FROM AUTHOR]

This paper proposes a novel scalable reinforcement learning approach for simultaneous routing and spectrum access in wireless ad-hoc networks. In most previous works on reinforcement learning for network optimization, the network topology is assumed to be fixed, and a different agent is trained for each transmission node—this limits scalability and generalizability. Further, routing and spectrum access are typically treated as separate tasks. Moreover, the optimization objective is usually a cumulative metric along the route, e.g., number of hops or delay. In this paper, we account for the physical-layer signal-to-interference-plus-noise ratio (SINR) in a wireless network and further show that bottleneck objective such as the minimum SINR along the route can also be optimized effectively using reinforcement learning. Specifically, we propose a scalable approach in which a single agent is associated with each flow and makes routing and spectrum access decisions as it moves along the frontier nodes. The agent is trained according to the physical-layer characteristics of the environment using a novel rewarding scheme based on the Monte Carlo estimation of the future bottleneck SINR. It learns to avoid interference by intelligently making joint routing and spectrum allocation decisions based on the geographical location information of the neighbouring nodes. [ABSTRACT FROM AUTHOR]

This paper studies the outage capacity of a network consisting of a multitude of heterogeneous mobile users and operating according to the classical opportunistic beamforming framework. The base station is located at the center of the cell, which is modeled as a disk of finite radius. The random user locations are modeled using a homogeneous spatial Poisson point process. The received signals are impaired by both fading and location dependent path loss. For this system, we first derive an expression for the beam outage probability. This expression holds for all path loss models that satisfy some mild conditions. Then, we focus on two specific path loss models (i.e., an unbounded model and a more realistic bounded one) to illustrate the applications of our results. In the large system limit, where the cell radius tends to infinity, the beam outage capacity and its scaling behavior are derived for the selected specific path loss models. This paper also studies opportunistic schemes that achieve fairness among the heterogeneous users. Numerical evaluations are performed to give further insights and to illustrate the applicability of the outage capacity results even to a cell having a small finite radius. [ABSTRACT FROM PUBLISHER]

Recent studies on cloud-radio access networks assume either signal-level or scheduling-level coordination. This paper considers a hybrid coordinated scheme as a means to benefit from both policies. Consider the downlink of a multi-cloud radio access network, where each cloud is connected to several base-stations (BSs) via high capacity links and, therefore, allows for joint signal processing within the cloud transmission. Across the multiple clouds, however, only scheduling-level coordination is permitted, as low levels of backhaul communication are feasible. The frame structure of every BS is composed of various time/frequency blocks, called power-zones (PZs), which are maintained at a fixed power level. This paper addresses the problem of maximizing a network-wide utility by associating users to clouds and scheduling them to the PZs, under the practical constraints that each user is scheduled to a single cloud at most, but possibly to many BSs within the cloud, and can be served by one or more distinct PZs within the BSs’ frame. This paper solves the problem using graph theory techniques by constructing the conflict graph. The considered scheduling problem is, then, shown to be equivalent to a maximum-weight independent set problem in the constructed graph, which can be solved using efficient techniques. This paper then proposes solving the problem using both optimal and heuristic algorithms that can be implemented in a distributed fashion across the network. The proposed distributed algorithms rely on the well-chosen structure of the constructed conflict graph utilized to solve the maximum-weight independent set problem. Simulation results suggest that the proposed optimal and heuristic hybrid scheduling strategies provide appreciable gain as compared with the scheduling-level coordinated networks, with a negligible degradation to signal-level coordination. [ABSTRACT FROM PUBLISHER]

This paper explores the dynamic properties of oscillating and propagating patterns in concentration of the information molecule and proposes a new modulation scheme for molecular communication. In the proposed modulation scheme, information molecules transmitted from a sender bio-nanomachine propagate in the environment, chemically react with the molecules in the environment, change their concentration, and form an oscillating and propagating pattern in the environment. A sender bio-nanomachine modulates information onto the dynamic properties of the pattern, such as the amount of change in concentration of the information molecule and the time duration of one cycle of a periodic pattern in concentration of the information molecule. Receiver bio-nanomachines receive the oscillating and propagating pattern that the sender bio-nanomachine generates and detect its dynamic properties to demodulate information. This paper implements the proposed modulation scheme using Ca2+ oscillation and propagation, a communication mechanism found in biological cells. It also demonstrates that the proposed modulation scheme allows information to be simultaneously modulated onto multiple dynamic properties of an oscillating and propagating pattern that a sender bio-nanomachine generates. The main contributions of this paper are to open a new research area of modulation schemes in molecular communication and to illustrate the possibility that biological cells use such modulation schemes for cell-to-cell communication. [ABSTRACT FROM PUBLISHER]

This paper considers the uplink performance of a multi-user massive multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system with mobile users. Mobility brings two major problems to a MIMO-OFDM system: inter carrier interference (ICI) and channel aging. In practice, it is common to allot multiple contiguous subcarriers to a user as well as schedule multiple users on each subcarrier. Motivated by this, we consider a general subcarrier allocation scheme and derive expressions for the ICI power, uplink signal to interference plus noise ratio and the achievable uplink sum-rate, taking into account the ICI and the multi-user interference due to channel aging. We show that the system incurs a near-constant ICI power that depends linearly on the ratio of the number of users per subcarrier to the number of subcarriers per user, nearly independently of how the UEs distribute their power across the subcarriers. Further, we exploit the coherence bandwidth of the channel to reduce the length of the pilot sequences required for uplink channel estimation. We consider both zero-forcing and maximal-ratio combining at the receiver and compare the respective sum-rate performances. In either case, the subcarrier allocation scheme considered in this paper leads to significantly higher sum-rates compared to previous work, owing to the near-constant ICI property as well as the reduced pilot overhead. [ABSTRACT FROM AUTHOR]

Spatial modulation (SM) is one special type of multiple-input multiple-output (MIMO) technique whose advantage is that only one radio-frequency (RF) chain is needed. Recently, the so-called cross Z-complementary pair (CZCP) was proposed as the SM training sequence. Optimal channel estimation performance over frequency-selective channels can be achieved since the CZCPs have the specific zero correlation zone (ZCZ) for auto-correlation and cross-correlation sums. However, the ZCZ width of the CZCP is theoretically upper bounded by half sequence length. In this paper, the CZCP is extended to the cross Z-complementary set (CZCS) to have larger ZCZ width which can be used in SM to combat larger delay spread. Several generic constructions of CZCSs with large ZCZ widths and flexible lengths are proposed in this paper. Even the perfect CZCS, whose ZCZ width has the maximum value, can be obtained. Numerical simulations demonstrate that the proposed CZCS-based training sequence can tolerate large delay spreads to improve the channel estimation performance in SM. [ABSTRACT FROM AUTHOR]

Vehicle-to-vehicle (V2V) wireless communication systems are fundamental in many intelligent transportation applications, e.g., traffic load control, driverless vehicle, and collision avoidance. Hence, developing appropriate V2V communication systems and standardization require realistic V2V propagation channel models. However, most existing V2V channel modeling studies focus on car-to-car channels; only a few investigate truck-to-car (T2C) or truck-to-truck (T2T) channels. In this paper, a hybrid geometry-based stochastic model (GBSM) is proposed for T2X (T2C or T2T) channels in freeway environments. Next, we parameterize this GBSM from the extensive channel measurements. We extract the multipath components (MPCs) by using a joint maximum likelihood estimation (RiMAX) and then determine the cluster types based on their evolution patterns. We classify the determined clusters into line-of-sight, single-bounce reflections from static interaction objects (IOs), single-bounce reflections from mobile IOs, multiple-bounce reflections, and density multipath components (DMCs). Particularly, we model multiple-bounce reflections as double clusters following the COST 273/COST2100 method. This paper presents the complete parameterization of the channel model. We validate this model by comparing the delay spread and the angular spreads of arrival/departure obtained from the proposed model with the measurement data. [ABSTRACT FROM AUTHOR]

This paper derives the maximum achievable sum-rate and presents the optimal encoding/decoding framework for rate-diverse wireless network coding (RD-WNC) over broadband channels consisting of multiple parallel subchannels. RD-WNC applies to a communication scenario in which a base station wants to deliver two different messages with different rates to two users. The base station combines the two separate messages into one network-coded message and broadcasts the network-coded message to both users. Each user then extracts its desired message from the network-coded message by subtracting from it the other message, which we assume to be side information available to the user. Deriving the maximum achievable sum-rate for RD-WNC is challenging when the channel consists of multiple parallel subchannels with different channel coefficients (e.g., the subcarrier channels of OFDM systems), since apart from the rate allocation between the two users, optimal power allocation among multiple subchannels needs to be identified. The first contribution of this paper is a new “mountain-leveling” power allocation algorithm to achieve the maximum sum-rate. With the resulting power allocation, we can then achieve the corresponding optimal sum-rate by having a separate encoding/decoding mechanism for each subchannels, but doing so is cumbersome and complex when the number of subchannels is large. The second contribution of this paper is a practical encoding/decoding framework using only one encoder-decoder mechanism for all subchannels without sacrificing sum-rate optimality. We provide numerical results to corroborate our theoretical findings and to demonstrate the benefits of our encoding/decoding framework. [ABSTRACT FROM AUTHOR]

This paper studies the combination of practical trellis and convolution codes with Tomlinson-Harashima precoding (THP) for the presubtraction of multiuser interference that is known at the transmitter but not known at the receiver. It is well known that a straightforward application of THP suffers power, modulo, and shaping losses. This paper proposes generalizations of THP that recover some of these losses. At a high signal-to-noise ratio (SNR), the precoding loss is dominated by the shaping loss, which is about 1.53 dB. To recover shaping loss, a trellis-shaping technique is developed that takes into account the knowledge of a noncausal interfering sequence, rather than just the instantaneous interference. At rates of 2 and 3 bits per transmission, trellis shaping is shown to be able to recover almost all of the 1.53-dB shaping loss. At a low SNR, the precoding loss is dominated by power and modulo losses, which can be as large as 3-4 dB. To recover these losses, a technique that incorporates partial interference presubtraction (PIP) within convolutional decoding is developed. At rates of 0.5 and 0.25 bits per transmission, PIP is able to recover 1-1.5 dB of the power loss. For intermediate SNR channels, a combination of the two schemes is shown to recover both power and shaping losses. [ABSTRACT FROM AUTHOR]

This paper proposes an ordered sequence detection (OSD) for digital pulse interval modulation (DPIM) in optical wireless communications. Leveraging the sparsity of DPIM sequences, OSD shows a comparable performance to the optimal maximum likelihood sequence detection with much lower complexity. Compared with the widely adopted sample-by-sample optimal threshold detection (OTD), it considerably improves the bit-error-rate (BER) performance by mitigating error propagation. Moreover, this paper proposes a barrier signal-aided digital pulse interval modulation (BDPIM), where the last of every $K$ symbols is allocated with more power as an inserted barrier signal. BDPIM with OSD (BDPIM-OSD) can limit the error propagation between two adjacent barriers. To reduce the storing delay when using OSD to detect extremely large packets, we propose BDPIM with a combination of OTD and OSD (BDPIM-OTD-OSD), within which long sequences are cut into pieces and separately detected. Approximate upper bounds of the average BER performance of DPIM-OTD, DPIM-OSD, BDPIM-OSD, and BDPIM-OTD-OSD are analysed. Simulations are conducted to corroborate our analysis. Optimal parameter settings are also investigated in uncoded and coded systems by simulations. Simulation results show that the proposed OSD and BDPIM bring significant improvement in uncoded and coded systems over various channels. [ABSTRACT FROM AUTHOR]

Wireless network virtualization, which decouples the physical supply process and the service provisioning process, can abstract, isolate, and share the physical infrastructure network equipment. This paper studies the resource virtualization in virtual multiple-input multiple-output single-carrier frequency-division-multiple-access uplink systems, where resources are abstracted to hide the complex details of the fading channel and the link rates are virtualized using the statistical method. Furthermore, the virtual link rates are scheduled and instantiated to different slices with customized delay-bounded quality of service (QoS) provisioning. In this scheme, a physical mobile network operator (PMNO) is in charge of the network resource at the physical layer, while virtual mobile network operators (VMNOs) are responsible for the traffic admission and the slice management at the MAC layer. Furthermore, we build up the resource virtualization problem as a cross-layer Stackelberg game, which has the interactive dual processes based on the QoS exponent: top-to-down sub-game of leaders at the MAC layer and down-to-top sub-game of follower at the physical layer. Using the newly designed functions for PMNO and VMNOs, we develop an effective dynamic algorithm with an iterative dual update to meet the optimization targets of PMNO and VMNOs. Simulation results verify the superiority and stability of delay-bounded QoS guaranteed wireless resource virtualization algorithm developed in this paper in terms of convergence, access rate, and delay-outage probability. [ABSTRACT FROM AUTHOR]

This paper investigates intelligent reflecting surface based backscatter communication (IRS-BackCom), in order to realize computational task offloading of energy-constrained mobile edge computing network in a self-sustainable manner. Specifically, the system operation is divided into two phases. In the first one, the ambient signal energy from a power beacon (PB) either provides the energy supply of local computing and energy harvesting circuits, or flows into the energy storage, when reaching the IRS. In the second one, the stored energy is used to enable IRS-BackCom for partial computational data offloading and energize local computing circuit. Based on this, the maximization problem of sum computational bits is formulated. By jointly optimizing the beamforming vector at the PB, the backscatter matrix at the IRS, the time scheduling of two-phase process, as well as the time of local computing, sum computational bits are maximized. In addition, this paper proposes element clustering to realize BackCom, so as to reduce the control and computation complexity of IRS. According to different operating mechanisms, two cluster operation modes are considered, namely independent cluster operation mode and joint cluster operation mode. Simulation results demonstrate the achievable sum computational bits by the proposed IRS-BackCom schemes. [ABSTRACT FROM AUTHOR]

Maximizing the information per the expected unit energy cost in biological neurons is vital in understanding the functionality of our nervous system and improving the bio-inspired nano-networks. Hence, toward a better comprehension of neuronal information processing and communication from an information-energy standpoint, this paper presents the following novel results on the capacity-achieving distribution: 1) For the first time, the paper presents the probability mass function of the number of spikes observed in a given time window where inter-spike intervals follow the Inverse Gaussian distribution. To extend this result, the first and second moments of the underlying probability mass function will be determined. 2) The paper proves that the relationship between the underlying probability mass function and the marginal distribution of the intensity parameter is one-to-one when the parameter is a random variable. 3) Proof that a unique capacity-achieving distribution for the stimulus intensity exists in a discrete form with a finite number of mass points that varies with the energy budget. Then, the paper presents an algorithm that numerically computes a trade-off between the maximum transmit bits and the coding-duration energy expenditure. Subsequently, the optimal multiplier along with the optimal distribution and the corresponding capacity will be obtained. [ABSTRACT FROM AUTHOR]

This paper investigates the optimal signal detection problem with a particular interest in large-scale multiple-input multiple-output (MIMO) systems. The problem is NP-hard and can be solved optimally by searching the shortest path on the decision tree. Unfortunately, the existing optimal search algorithms often involve prohibitively high complexities, which indicates that they are infeasible in large-scale MIMO systems. To address this issue, we propose a general heuristic search algorithm, namely, hyper-accelerated tree search (HATS) algorithm. The proposed algorithm employs a deep neural network (DNN) to estimate the optimal heuristic, and then use the estimated heuristic to speed up the underlying memory-bounded search algorithm. This idea is inspired by the fact that the underlying heuristic search algorithm reaches the optimal efficiency with the optimal heuristic function. Simulation results show that the proposed algorithm reaches almost the optimal bit error rate (BER) performance in large-scale systems, while the memory size can be bounded. In the meanwhile, it visits nearly the fewest tree nodes. This indicates that the proposed algorithm reaches almost the optimal efficiency in practical scenarios, and thereby it is applicable for large-scale systems. Besides, the code for this paper is available at https://github.com/skypitcher/hats. [ABSTRACT FROM AUTHOR]

This paper studies the subcarrier allocation and precoder design problem for downlink multiple-input-multiple-output-orthogonal frequency-division multiple access systems. The criterion is to maximize the energy efficiency (EE) of the system. We adopt the time-sharing concept to allocate each subcarrier to one user, which results in a criterion similar with that of rate maximization. However, this approach does not make it possible to solve the problem for any value of the transmit power. We found that there exist gaps along the direction of total transmit power when the user selection switches for each subcarrier, which leads to a discontinuous EE function, for which quasi-concavity has to be checked. We first show that the sufficient conditions obtained for the subcarrier allocation approach are the optimal ones among all possibilities with the same transmit power. Then, we show that the proposed subcarrier allocation results in a discontinuous and quasi-concave EE function. We also give an upper bound of the EE function when the proposed sufficient conditions are not met. Finally, we propose an algorithm to find the maximal EE and its performance is illustrated by means of numerical results. [ABSTRACT FROM PUBLISHER]

The read channel of a Flash memory cell degrades after repetitive program and erase (P/E) operations. This degradation is often modeled as a function of the number of P/E cycles. In contrast, this paper models the degradation as a function of the cumulative effect of the charge written and erased from the cell. Based on this modeling approach, this paper dynamically allocates voltage using lower voltage write thresholds at the beginning of the device lifetime and increasing the thresholds as needed to maintain the mutual information of the read channel in the face of degradation. This paper introduces the technique in an idealized setting and then removes ideal assumptions about channel knowledge and available voltage resolution to conclude with a practical scheme with performance close to that of the idealized setting. [ABSTRACT FROM PUBLISHER]

This paper presents a general approach for optimizing the number of symbols in increments (packets of incremental redundancy) in a feedback communication system with a limited number of increments. This approach is based on a tight normal approximation on the rate for successful decoding. Applying this approach to a variety of feedback systems using nonbinary (NB) low-density parity-check (LDPC) codes shows that greater than 90% of capacity can be achieved with average blocklengths fewer than 500 transmitted bits. One result is that the performance with ten increments closely approaches the performance with an infinite number of increments. The paper focuses on binary-input additive-white Gaussian noise (BI-AWGN) channels but also demonstrates that the normal approximation works well on examples of fading channels as well as high-SNR AWGN channels that require larger QAM constellations. This paper explores both variable-length feedback codes with termination (VLFT) and the more practical variable length feedback (VLF) codes without termination that require no assumption of noiseless transmitter confirmation. For VLF, we consider both a two-phase scheme and CRC-based scheme. [ABSTRACT FROM AUTHOR]

This paper explores the blind decoding of control channels for obtaining other user identities in 3GPP specification, such as high-speed packet access and long-term evolution. The reliable decoding of control channels with user identities is crucial to mitigate inter-cell interference as well as multi-user interference. This paper exploits a method of user identity filtering followed by a method of user identity detection based on the traffic persistency, which is common to all standards. Hence, the proposed methods are applicable to all the standards regulated by 3GPP specification. In particular, this paper analyzes the proposed other user identity detection algorithm under the random coding. Simulation results show that the proposed method is reliable even at low SNRs and is also aligned with the analysis. [ABSTRACT FROM AUTHOR]

A hybrid communication network with a common analog source signal and independent digital data streams at the transmitters of a multiple access network is considered. The receiver has to estimate the analog signal samples with a given fidelity, and decode the digital streams with a low error probability. The main goal of this paper is to characterize the optimal tradeoff between the mean-squared error distortion in source estimation and the data rates available to each user. To this end, we consider a Gaussian multiple access channel (GMAC) setup with additive state, where the state is nothing but a scaled version of the source process itself. The state process is assumed to be non-causally available to all the transmitting nodes. The problem now becomes that of the joint state estimation and message communication in a GMAC with state. We provide a complete characterization of the optimal distortion-rate tradeoff for an $N$ —sender GMAC. Our results show that, similar to the single-user results, it is optimal to amplify the state using uncoded transmissions, whereas the digital streams are superposed using appropriate Gaussian codebooks in conjunction with dirty paper coding (DPC). Since the variance of the additive state is controlled by a scaling factor in our model, we also recover the results for communicating a common source and independent messages over a GMAC without state as a special case. [ABSTRACT FROM AUTHOR]

In this paper, we analyze the sum rate performance of multi-user multiple-input-multiple-output (MU-MIMO) systems, with a finite constellation phase-shift keying (PSK) input alphabet. We analytically calculate and compare the achievable sum rate in three downlink transmission scenarios: 1) without precoding; 2) with zero forcing (ZF) precoding; and 3) with closed form constructive interference (CI) precoding technique. In light of this, new analytical expressions for the average sum rate are derived in the three cases, and Monte Carlo simulations are provided throughout to validate the analysis. Furthermore, based on the derived expressions, a power allocation scheme that can ensure fairness among the users is also proposed. The results in this work demonstrate that the CI strictly outperforms the other two schemes, and the performance gap between the considered schemes increases with the increase in MIMO size. In addition, the CI provides higher fairness and the power allocation algorithm proposed in this paper can achieve maximum fairness index. [ABSTRACT FROM AUTHOR]

Doppler effect is a fundamental phenomenon that appears in wave propagation, where a moving observer experiences dilation or contraction of the wavelength of a wave. It also appears in radio frequency (RF) wireless communication when there exists a relative movement between the transmitter and the receiver, and is widely considered as a major impairment for reliable wireless communication. The current paper proposes Doppler assisted wireless communication (DAWC) that exploits Doppler effect and uses kinetic energy for co-channel interference (CCI) mitigation. The proposed system also exploits the propagation environment and the network topology and consists of an access point (AP) with a rotating drum antenna. The rotating drum receive antenna is designed in such a way that it shifts the interfering signals away from the desired signal band. This paper includes a detailed system model, and the results show that under favorable fading conditions, CCI can be significantly reduced. Therefore, it is anticipated that more sophisticated wireless systems and networks can be designed by extending the basic ideas proposed herein. [ABSTRACT FROM AUTHOR]

This paper introduces circular color shift keying (CSK) constellations in a visible light communications (VLC) system using a camera-based receiver with applications to vehicular communications, where vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications are required to improve the safety of vehicles in high traffic density. The circular CSK constellations are shown to outperform the geometric and IEEE 802.15.7 constellations in terms of bit-error probability. Afterward, the noise at the receiver is investigated and transferred from the spatial domain to an angular noise in the International Commission on Illumination (CIE) color domain, where it is shown to behave similarly to a Gaussian distribution. Based on this noise model, a closed-form expression of the bit-error rate (BER) of circular CSK constellations is derived and shown to be accurate for BER ranges corresponding to VLC applications of practical interest. Diversity techniques are also investigated, and interesting differences are noted during the analysis compared to traditional radio frequency (RF) communication scenarios. Finally, the design of a link adaptation approach maximizing the number of bits per transmitted symbol, while meeting a target BER, is proposed. Hence, this paper presents a detailed design and analysis of a novel VLC modulation technique and demonstrates its efficiency and superiority. [ABSTRACT FROM AUTHOR]

This paper considers the problem of source coding with side information at the decoder, also called Slepian–Wolf source coding scheme. In practical applications of this coding scheme, the statistical relation between the source and the side information can vary from one data transmission to another, and there is a need to adapt the coding rate depending on the current statistical relation. In this paper, we propose a novel rate-adaptive code construction based on LDPC codes for the Slepian–Wolf source coding scheme. The proposed code design method allows to optimize the code degree distributions at all the considered rates, while minimizing the amount of short cycles in the parity check matrices at all rates. Simulation results show that the proposed method greatly reduces the source coding rate compared to the standard low density parity check accumulated (LDPCA) solution. [ABSTRACT FROM AUTHOR]

Hybrid transceiver designs for millimeter wave massive multiple-input multiple-output systems are feasible candidates to reduce the volume of radio frequency (RF) chains, decomposing the signal processing into the analog and digital domains. The existing schemes heavily depend on the singular value decomposition to obtain subchannels with uneven power gains, causing bit error rate (BER) performance degradation. In this paper, we propose a hybrid transceiver design based on the uniform channel decomposition (UCD), yielding subchannels with identical gains to improve the BER performance. Inspired by the UCD concept, we derive an equivalent optimization problem and propose two schemes, namely, phase-extraction and iterative update, to determine the RF beamformers, yielding an effective baseband channel with the greatest possible geometric mean of singular values. We apply the UCD with a minimum mean squared error criterion to complete the baseband beamforming. Finally, we combine the hybrid UCD beamforming with the vertical-Bell Labs layered space-time and dirty paper coding, to eliminate the inter-subchannel interference. An asymptotic analysis of the scheme performance is also pursued. The simulation results show that the proposed hybrid scheme outperforms the conventional schemes on the transmission BER, which achieves a spectral efficiency close to that of the fully-digital counterpart. [ABSTRACT FROM AUTHOR]

This paper investigates the hybrid precoding design for millimeter wave (mmWave) multiple-input-multiple-output (MIMO) systems with finite-alphabet inputs. The mmWave MIMO system employs partially-connected hybrid precoding architecture with dynamic subarrays, where each radio frequency (RF) chain is connected to a dynamic subset of antennas. We consider the design of analog and digital precoders utilizing statistical and/or mixed channel state information (CSI), which involve solving an extremely difficult problem in theory: First, designing the optimal partition of antennas over RF chains is a combinatorial optimization problem, whose optimal solution requires an exhaustive search over all antenna partitioning solutions; Second, the average mutual information under mmWave MIMO channels lacks closed-form expression and involves prohibitive computational burden; and Third, the hybrid precoding problem with given partition of antennas is nonconvex with respect to the analog and digital precoders. To address these issues, this paper first presents a simple criterion and the corresponding low complexity algorithm to design the optimal partition of antennas using statistical CSI. Then, it derives the lower bound and its approximation for the average mutual information, in which the computational complexity is greatly reduced compared to calculating the average mutual information directly. In addition, it also shows that the lower bound with a constant shift offers a very accurate approximation to the average mutual information. This paper further proposes utilizing the lower bound approximation as a low-complexity and accurate alternative for developing a manifold-based gradient ascent algorithm to find near-optimal analog and digital precoders. Several numerical results are provided to show that our proposed algorithm outperforms the existing hybrid precoding algorithms. [ABSTRACT FROM AUTHOR]

Molecular communication via diffusion (MCvD) is a molecular communication method that utilizes the free diffusion of carrier molecules to transfer information at the nanoscale. Due to the random propagation of carrier molecules, intersymbol interference (ISI) is a major issue in an MCvD system. Alongside ISI, interlink interference (ILI) is also an issue that increases the total interference for the MCvD-based multiple-input-multiple-output (MIMO) approaches. Inspired by the antenna index modulation (IM) concept in traditional communication systems, this paper introduces novel IM-based transmission schemes for MCvD systems. In this paper, molecular space shift keying (MSSK) is proposed as a novel modulation for molecular MIMO systems, and it is found that this method combats ISI and ILI considerably better than the existing MIMO approaches. For nanomachines that have access to two different molecules, the direct extension of MSSK, quadrature MSSK (QMSSK) is also proposed. QMSSK is found to combat ISI considerably well while not performing well against ILI-caused errors. In order to combat ILI more effectively, another dual-molecule-based novel modulation scheme called the molecular spatial modulation (MSM) is proposed. Combined with the Gray mapping imposed on the antenna indices, MSM is observed to yield reliable error rates for molecular MIMO systems. [ABSTRACT FROM AUTHOR]

Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM AUTHOR]