Search

Inhomogeneous linear ordinary differential equations (ODEs) and systems of ODEs can be solved in a variety of ways. However, hardware circuits that can perform the efficient analog computation to solve them are rarely in the literature. To address such problems, this paper proposes a general method of using a memristor-capacitor (M-C) circuit to solve inhomogeneous linear ODEs and systems of ODEs of any order in initial value problems. The M-C circuit can match the coefficients of the equations sought by adjusting the memristor resistance value according to the coefficient formula proposed in the paper, which has higher programmability. Then, some ODEs and systems of ODEs are given in the paper as examples to evaluate the proposed method. According to the comparison results based on MATLAB software simulation and the simulation based on OrCAD software, the designed M-C circuit has an effective improvement in speed and the accuracy exceeds 99.95% in software simulation. Based on practical verification, this paper gives the actual M-C circuit experiment based on PCB. Moreover, the proposed method can be used to quickly solve the object motion state in the spring mass damping system in actual engineering, and the accuracy can reach 99.98%. [ABSTRACT FROM AUTHOR]

In this paper, based on sampled-data control method, we address the stabilization problem for a general class of linear continuous-time fractional systems whose solution contains the Mittag-Leffler function that does not obey the basic exponentiation identity. By considering the infinite memory and hereditary characteristics of fractional-order calculus, we propose a sampled-data controller that guarantees the resulting closed-loop system to be asymptotically stable. Simulation examples are presented to demonstrate the effectiveness of the proposed controller and verify the established results. [ABSTRACT FROM AUTHOR]

Efficient simulation of switched-mode power conversion circuits is necessary for the analysis and optimization of power electronics. This paper introduces the extended impedance method (EIM) to the simulation and analysis of general switched-mode power converter circuits. By using the EIM method, the conventional impedance concept can be extended to involve more linear time-variant (LTV) and nonlinear devices, such as MOSFET switches and diodes, which are commonly used in switched-mode power conversion circuits. EIM models a circuit network from the component level in the frequency domain, rather than from the system-level constitutive differential equation in the time domain. Compared with the conventional averaging method, EIM can reveal more high-frequency features of a switched-mode converter circuit, in particular, those around the switching instants. A buck converter is taken as a representative example to validate the EIM based analysis. Both the simulation and experimental results prove that EIM provides precise numerical results, which match the real waveform, as the commercial simulators, e.g. PSpice and ADS, do. Moreover, it largely reduces the computational complexity towards more efficient and more flexible steady-state analysis of switched-mode power electronics. [ABSTRACT FROM AUTHOR]

As is known to all that the Lyapunov-Krasovskii functional (LKF) has played a vital role in studying the fixed-time (FXT) stability of the time-delayed Filippov discontinuous systems. When investigating the FXT stability of the time-delayed discontinuous systems, the interesting topic is to provide the more relaxed conditions imposed on the LKF and obtain the more accurate settling-time (ST). This paper aims to investigate the new FXT stability lemma with more relaxed conditions for the time-delayed Filippov discontinuous systems. By using some novel inequality techniques and analytical methods, the new FXT stability lemma is established and more accurate ST is estimated. The traditional discussion about $0 < V < 1$ and $V \geq 1$ is not required. For the purpose of validation, FXT stabilization of discontinuous inertial networks with mixed time delays is considered. By using differential inclusions theory and the new FXT stability lemma, the delay-dependent FXT stabilization criteria are derived. It is the first time to derive the delay-dependent FXT stabilization criteria for the discontinuous inertial networks. Finally, examples are given to show the effectiveness of the established results. [ABSTRACT FROM AUTHOR]

In this letter, it is verified that the main result of the above article on converging the voltage tracking error of a buck converter controlled by a fractional-order sliding mode controller cannot be logically justified. The root cause of this inconsistency, which is an improper use of an inequality, is discussed. [ABSTRACT FROM AUTHOR]