Search

This paper presents a physics-based macro model that can predict with a high degree of accuracy various experimental data available for the propagation path loss of radio waves in a cellular wireless environment. A theoretical macro model based on the classical Sommerfeld formulation can duplicate various experimental data including that of Okumuraet al.carried out in 1968. It is important to point out that there are also many statistical models but they do not conform to the results of the available experimental data. Specifically, there are separate path loss propagation models available in the literature for waves traveling in urban, suburban, rural environments, and the like. However, no such distinction is made in the results obtained from the theoretical analysis and measured experimental data. Based on the analysis using the macro model developed after Sommerfeld’s classic century-old analytical formulation, one can also explain the origin of slow fading which is due to the interference between the direct wave from the base station antenna and the ground wave emanating from the reflections of the direct wave and occurs only in the near field of the transmitting antenna. The so-called height gain occurs in the far field of a base station antenna deployment which falls generally outside the cell of interest, while in the near field, within the cell, there is a height loss of the field strength for observation points near the ground. A physical realization of the propagation mechanism is illustrated through Vander Pol’s exact transformation of the Sommerfeld integrals for the potential to a spatial semiinfinite volume integral and thus illustrates why buildings, trees, and the like have little effects on the propagation mechanism. [ABSTRACT FROM AUTHOR]

Physics-based wireless propagation modeling and network protocol design have evolved over decades as orthogonal areas in communication systems research. This fragmented approach does not exploit available efficiencies when planning and deploying communication systems. In an attempt to integrate the two areas, we harness the understanding of the underlying physics of electromagnetic propagation to enhance the robustness of network protocol design by deriving physics-based network-level performance metrics. We use ray-tracing and parabolic equation models of 2.4 GHz propagation along tunnel and open-air sections of London Underground to evaluate the performance of a communications-based train control system. For comparison, we consider existing path loss models for tunnel environments and investigate whether they can provide sufficient accuracy to be used for network protocol design. We show that physics-based models lead to reliable predictions at the network level, similar in fidelity to using measured data and unlike using simplified channel models of the path loss exponent type. [ABSTRACT FROM AUTHOR]

When reverberation chambers are loaded to increase the coherence bandwidth for modulated-signal measurements, a secondary effect is decreased spatial uniformity. We show that an appropriate choice of stirring sequence, consisting of a combination of mode-stirring mechanisms such as paddle and antenna-platform stirring, can mitigate the potential for increased uncertainty. We develop a new mode-stirring sample correlation model for uncertainty due to the stirring sequence. In a comparison with an empirical uncertainty analysis, the model is found to have an agreement within 2.5%. Our analysis is demonstrated for four loading cases in each of three reverberation chambers. The model is used to determine an optimal stirring sequence for a given chamber setup directly from correlations associated with each stirring mechanism. The model can also be understood in terms of the entropy of a measurement and it is shown that maximizing the entropy corresponds to a minimized uncertainty. The method presented here not only provides insight into sources of uncertainty but also allows users to determine an optimal mode-stirring sequence with minimized uncertainty for a given chamber setup. [ABSTRACT FROM AUTHOR]

The radiowave propagation through hollow clay brick walls, which are common in southern European construction, is analyzed. The brick walls have thicknesses of 11, 15, and 20 cm, common in both interior and exterior walls, and are bound with a portland cement, water, and sand mixture. For each brick dimension, three prototypes were assembled, varying in the type of wall finish, i.e., exposed brick, smooth painted plaster, and rough painted plaster. A 10 cm concrete wall was also included for comparison purposes. Penetration loss metrics were evaluated in an anechoic chamber at frequencies ranging from 680 MHz to 10 GHz. Results demonstrate that the brick wall internal heterogeneity, as well as the type of finish, significantly influences the propagation phenomena and thus the frequency response of the walls, with relatively high penetration losses observed at some relevant commercial frequency bands. Finally, an alternative brick design, with reduced penetration losses, is also proposed and evaluated under simulation environment only. [ABSTRACT FROM AUTHOR]

Wireless communications or navigation is heavily influenced by electromagnetic wave propagation. The power-delay profile (PDP) characterizes the propagation channel by simple statistics. In this communication, we propose a channel model to simulate a given wideband averaged PDP obtained by measurements or theoretical considerations, enabling to test, develop, and design radio links. The channel model is based on a geometrical stochastic approach, allowing to simulate the space-variant channel impulse response for a moving receiver. Furthermore, the appearance and disappearance of multipath components are geometrically taken into account by an angular pattern. We verify the proposed methodology by simulations. [ABSTRACT FROM AUTHOR]

This paper presents the results of the first propagation measurement campaign conducted in the 2.4 GHz industrial, scientific and medical (ISM) band for low antenna heights in a North American boreal forest. The $2 \times 1$ multiple-input, single output measurements capture propagation conditions for wireless peer-to-peer or sensor networks in the boreal environment. Unlike many other forests, it is shown that ground reflections strongly influence large scale propagation for the low antenna boreal case. Results also indicate that scattering is severe but that both frequency diversity and multiple antenna techniques will be effective for mitigating and/or exploiting the fading caused by this scattering. [ABSTRACT FROM AUTHOR]