Search

This paper provides a survey of various experimental data available on the value of the propagation path loss of radio waves in a cellular wireless environment. It is shown starting with the Okumuraet al.’s paper on propagation measurements and other available published experimental data that they all exhibit that the electric field varies as $\rho ^{-1.5}$ within a cellular radius of a few kilometers, where $\rho $ is the radial distance of the receiving antenna from the transmitting one. This decay in the fields is equivalent to a propagation loss of −9 dB/octave or −30 dB for a decade of the distance. This value is independent of the nature of the ground, whether it be composed of rural, urban, suburban, or water. This is the first time it is stated that the propagation path loss due to the presence of ground generates a path loss of 90 dB when the signals travel a distance of 1 km. This value is rather large when compared to a loss of 30–50 dB produced by buildings, trees, and similar artifacts. Therefore, the experimental data indicate that the effect of trees and buildings have a secondary influence on the decay of the electric field with distance, the dominant one is the propagation loss over an imperfect ground. Contemporary propagation models do not acknowledge this fact. Outside the cellular radius of a few kilometers, the path loss appears to be 12 dB/octave or 40 dB/decade of distance. In a companion paper, it will be demonstrated that the values for the path loss can be explained from an analytical standpoint without taking recourse to statistics which involves a lot of assumptions on the functional variation of the variables of interest. [ABSTRACT FROM AUTHOR]

A test setup is deployed to study the influence of base station antenna height on the cellular network coverage. Both the numerical and experimental investigations are undertaken to evaluate the received electric field levels for different heights of the transmitting (TX) antenna and several distances between the transmitter and the receiver. The numerical simulation results demonstrate that when the TX antenna is mounted high above the ground, more fluctuations are induced in the electric field levels, resulting in possible dead zones for mobile communications. The measured received levels and data rates confirm the numerical simulation results. [ABSTRACT FROM AUTHOR]

Fixed performing antennas are ineffective in providing optimum performance in a changing multipath environment, such as underground mines where channel conditions quickly change as the antenna is moved. Hence, we investigated the performance of a pattern reconfigurable antenna (RA) in improving the wireless communications link in a hard rock underground mine. An RA and a dipole were characterized and compared in line-of-sight (LOS) and nonline-of-sight (NLOS) propagation scenarios. As a proof of concept, experiments were performed at the University of Queensland Experimental Mine using a 1 GHz frequency band centered at 2.45 GHz. Analysis of complex channel impulses captured through the frequency-domain channel sounding is presented. Also, the results show that reconfigurability in the rich multipath environment achieves a 20% and 34% improvement in path loss and delay spread, respectively, compared to a fixed-beam antenna in NLOS propagation. Furthermore, more than 34% improvement in coherence bandwidth is observed in LOS and NLOS. Therefore, reliable high-data-rate communication is achievable in underground mines by the effective management of multipath effects using the RA. [ABSTRACT FROM AUTHOR]

When reverberation chambers are loaded to increase the coherence bandwidth for modulated-signal measurements, a secondary effect is decreased spatial uniformity. We show that an appropriate choice of stirring sequence, consisting of a combination of mode-stirring mechanisms such as paddle and antenna-platform stirring, can mitigate the potential for increased uncertainty. We develop a new mode-stirring sample correlation model for uncertainty due to the stirring sequence. In a comparison with an empirical uncertainty analysis, the model is found to have an agreement within 2.5%. Our analysis is demonstrated for four loading cases in each of three reverberation chambers. The model is used to determine an optimal stirring sequence for a given chamber setup directly from correlations associated with each stirring mechanism. The model can also be understood in terms of the entropy of a measurement and it is shown that maximizing the entropy corresponds to a minimized uncertainty. The method presented here not only provides insight into sources of uncertainty but also allows users to determine an optimal mode-stirring sequence with minimized uncertainty for a given chamber setup. [ABSTRACT FROM AUTHOR]

The radiowave propagation through hollow clay brick walls, which are common in southern European construction, is analyzed. The brick walls have thicknesses of 11, 15, and 20 cm, common in both interior and exterior walls, and are bound with a portland cement, water, and sand mixture. For each brick dimension, three prototypes were assembled, varying in the type of wall finish, i.e., exposed brick, smooth painted plaster, and rough painted plaster. A 10 cm concrete wall was also included for comparison purposes. Penetration loss metrics were evaluated in an anechoic chamber at frequencies ranging from 680 MHz to 10 GHz. Results demonstrate that the brick wall internal heterogeneity, as well as the type of finish, significantly influences the propagation phenomena and thus the frequency response of the walls, with relatively high penetration losses observed at some relevant commercial frequency bands. Finally, an alternative brick design, with reduced penetration losses, is also proposed and evaluated under simulation environment only. [ABSTRACT FROM AUTHOR]

The next generation of intelligent vehicle systems will use wireless communication to connect a car and its passengers. It is therefore important to understand the in-cabin propagation characteristics of an automobile. This paper investigates the wireless channel native to these cabin enclosures. We present detailed, polarization dependent field measurements over a plane of interest in the cabin, and show that a simple analytical model gives reasonable agreement with our measurements. [ABSTRACT FROM PUBLISHER]

This paper describes an extensive propagation channel measurement campaign in a warehouse environment for line-of-sight (LOS) and nonline-of-sight (NLOS) scenarios. The measurement setup employs a vector network analyzer operating in the 2–8-GHz frequency band combined with an $8 \times 8$ virtual multiple-input multiple-output (MIMO) antenna array. We develop a comprehensive statistical propagation channel model based on high-resolution extraction of multipath components and subsequent spatiotemporal clustering analysis. The intracluster direction of departure (DoD), direction of arrival (DoA), and the time of arrival (ToA) are independent, both for the LOS and NLOS scenarios. The intracluster DoD and DoA can be approximated by the Laplace distribution, and the intracluster ToA can be approximated by an exponential mixture distribution. The intercluster analysis, however, shows a dependency between the cluster DoD, DoA, and ToA. To capture this dependency, we separately model the clusters caused by single and multiple bounce scattering along the aisles in the warehouse. The intercluster DoD distribution follows a Laplace distribution, while the cluster DoA conditioned on the DoD is approximated by a Gaussian mixture distribution. The model was validated using the capacity and delay-spread values. [ABSTRACT FROM AUTHOR]

This paper presents the results of the first propagation measurement campaign conducted in the 2.4 GHz industrial, scientific and medical (ISM) band for low antenna heights in a North American boreal forest. The $2 \times 1$ multiple-input, single output measurements capture propagation conditions for wireless peer-to-peer or sensor networks in the boreal environment. Unlike many other forests, it is shown that ground reflections strongly influence large scale propagation for the low antenna boreal case. Results also indicate that scattering is severe but that both frequency diversity and multiple antenna techniques will be effective for mitigating and/or exploiting the fading caused by this scattering. [ABSTRACT FROM AUTHOR]

The Rician K-factor of the vehicle-to-vehicle (V2V) wireless propagation channel is estimated using a moment-based method on the envelope of measured pulse data. The measurements were carried out under vehicle-to-vehicle wireless communication channel condition with car rooftop antenna heights at one end of the link and very low antenna height at the other end. Data captured from typical urban, suburban and rural areas are analyzed and the K-factor probability density function is generated for each scenario to give an insight into the V2V channel behavior. For all three areas, the majority of K values are found to be within the range of -10 to +10 dB. The K-factor distributions are close to normal with mean values of 1.8, 2.6 and 3 dB respectively for urban, suburban and rural area. [ABSTRACT FROM PUBLISHER]

A model parameterization and validation is proposed for specular-diffuse clustered channel models. The double-directional model parameters, based on an experimental measurement campaign, are presented. The specular-diffuse model is validated with regard to the following validation metrics: mutual information, singular values, Demmel condition number and ellipticity. A good agreement is observed when comparing the model with experimental measurements. Finally, the influence of the diffuse multipath component on the performance of the model validation is evaluated. [ABSTRACT FROM PUBLISHER]

The effects of carrier frequency, antenna height and season on a broadband wireless access (BWA) system deployed in a rural area at 825 MHz and 3535 MHz are studied in this paper. With the aid of digital terrain information, both large scale and small scale fading effects present in the rural channel are discussed. Our investigation found that the frequency dependence of a wireless channel varies strongly with the environment. Also, the effects of the antenna height in rural areas of irregular terrains vary with the available clearance above the clutters in the regions. This paper uses extensive measurement campaigns to quantify these effects in winter and spring using a BWA system (IEEE 802.16e) deployed in Hetzwege/Abbendorf, Germany. In the study of small scale fading, the variations of the fading distributions of the wireless channel due to season changes are derived and the corresponding multipath propagations are discussed in this paper. [ABSTRACT FROM PUBLISHER]

In ultra-wideband (UWB) wireless propagation channels, each multipath component (MPC) can exhibit delay dispersion or, equivalently, frequency dependence; even more, this dispersion can be different for different MPCs. While this effect is understood to have important implications for UWB system design, extraction of the frequency-dependence parameters from measurements has been lacking. This paper will provide both the theoretical tools for the parameter extraction, and provide experimental results of such parameters in UWB indoor channels. We first develop a method that extracts a single MPC. Based on the image principle, the method identifies locations and intensity of radio sources including both original and image sources (corresponding to MPCs) by a distributed antenna array. We show that the method provides spatial resolution better than 0.5 m and is robust against possible measurement errors. Having applied the method to the measured channels in indoor line-of-sight scenarios, we track the detected image sources over (partially overlapping) frequency subbands to obtain frequency dependent properties of their intensity and location. The variation of the source intensity over the frequency was found to be significant. Furthermore, the locations of the image sources can vary as the frequency changes. Comparison of the results with models that do not describe varying per-path frequency dependence revealed noticeable difference in the shape of the CIRs, and as a result, in the delay spread and the number of significant delay bins for Rake reception. [ABSTRACT FROM PUBLISHER]

The wireless harness is a new emerging short-range communication to replace wire harness implemented in devices with wireless communications between internal components. In such an in-device wireless harness, the communication distance is up to a couple of meters at most. Through the challenge to apply this wireless communication technology to information and communication technology (ICT) equipment, we found that the radio channel inside the ICT equipment deeply depends on its internal structure more than we expected. In order to understand the radio propagation characteristics inside such equipment, we propose a new modeling technique with using a frequency- dependent path loss exponent expressing the near- and far-field propagation, which enables us to successfully extract attenuation factors for the frequency and the propagation distance from the measured data. The results shows the path loss characteristics can be divided into three regions; line-of-sight (LOS), non-line-of-sight (NLOS), and a transition range. The transition range, which appears between the LOS and the NLOS, is caused by a blocking due to the densely-packaged internal components. These findings and equations can be criteria to design a wireless harness communication link. [ABSTRACT FROM AUTHOR]