Search

Wireless communications are expected to take place in increasingly complicated scenarios, such as dense urban, forest, tunnel, and other cluttered environments. A key emerging challenge is to understand the physics and characteristics of wave propagation in these environments, which is critical for the analysis, design, and application of advanced mobile and wireless communication systems. In this paper, we present a full-wave field-based computational methodology for radio wave propagation in complex urban environments. Both transmitting/receiving antennas and propagation environments are modeled by first-principles calculations. A system-level, large scene analysis is enabled by the scalable, ultraparallel algorithms on the emerging high-performance computing platforms. The proposed computational framework is verified and validated with semianalytical models and representative measurements. [ABSTRACT FROM AUTHOR]

Fabry–Perot (FP)/leaky-wave antennas fed with multiple sources are analyzed and modeled. A transmission line (TL) approach for a rapid and efficient analysis of such antenna configuration is developed. The method is based on the superposition of the traveling leaky waves excited by each of the applied sources. The field distribution inside the cavity is derived by using a longitudinal TL model which takes into account the interference of the multiple leaky waves excited by the sources. The radiation pattern of the multiple fed antennas is obtained by using the fast Fourier transformation of the field distribution. The propagation constants of the leaky waves, traveling inside the FP cavity, are computed analytically, and the accuracy of the proposed expressions is verified by using the transverse resonance method approach. A novel and accurate closed-form expression for the leaky-wave propagation constant has been derived. A detailed analysis of the antenna properties is carried out by using the model showing how this antenna configuration is suitable for designing very large aperture antennas with very high gain and fairly acceptable bandwidth. A prototype of a multifeed FP antenna has been fabricated by using 3-D printing technology and tested. [ABSTRACT FROM AUTHOR]

This paper describes an extensive propagation channel measurement campaign in a warehouse environment for line-of-sight (LOS) and nonline-of-sight (NLOS) scenarios. The measurement setup employs a vector network analyzer operating in the 2–8-GHz frequency band combined with an $8 \times 8$ virtual multiple-input multiple-output (MIMO) antenna array. We develop a comprehensive statistical propagation channel model based on high-resolution extraction of multipath components and subsequent spatiotemporal clustering analysis. The intracluster direction of departure (DoD), direction of arrival (DoA), and the time of arrival (ToA) are independent, both for the LOS and NLOS scenarios. The intracluster DoD and DoA can be approximated by the Laplace distribution, and the intracluster ToA can be approximated by an exponential mixture distribution. The intercluster analysis, however, shows a dependency between the cluster DoD, DoA, and ToA. To capture this dependency, we separately model the clusters caused by single and multiple bounce scattering along the aisles in the warehouse. The intercluster DoD distribution follows a Laplace distribution, while the cluster DoA conditioned on the DoD is approximated by a Gaussian mixture distribution. The model was validated using the capacity and delay-spread values. [ABSTRACT FROM AUTHOR]

This paper presents the results of the first propagation measurement campaign conducted in the 2.4 GHz industrial, scientific and medical (ISM) band for low antenna heights in a North American boreal forest. The $2 \times 1$ multiple-input, single output measurements capture propagation conditions for wireless peer-to-peer or sensor networks in the boreal environment. Unlike many other forests, it is shown that ground reflections strongly influence large scale propagation for the low antenna boreal case. Results also indicate that scattering is severe but that both frequency diversity and multiple antenna techniques will be effective for mitigating and/or exploiting the fading caused by this scattering. [ABSTRACT FROM AUTHOR]

In ultra-wideband (UWB) wireless propagation channels, each multipath component (MPC) can exhibit delay dispersion or, equivalently, frequency dependence; even more, this dispersion can be different for different MPCs. While this effect is understood to have important implications for UWB system design, extraction of the frequency-dependence parameters from measurements has been lacking. This paper will provide both the theoretical tools for the parameter extraction, and provide experimental results of such parameters in UWB indoor channels. We first develop a method that extracts a single MPC. Based on the image principle, the method identifies locations and intensity of radio sources including both original and image sources (corresponding to MPCs) by a distributed antenna array. We show that the method provides spatial resolution better than 0.5 m and is robust against possible measurement errors. Having applied the method to the measured channels in indoor line-of-sight scenarios, we track the detected image sources over (partially overlapping) frequency subbands to obtain frequency dependent properties of their intensity and location. The variation of the source intensity over the frequency was found to be significant. Furthermore, the locations of the image sources can vary as the frequency changes. Comparison of the results with models that do not describe varying per-path frequency dependence revealed noticeable difference in the shape of the CIRs, and as a result, in the delay spread and the number of significant delay bins for Rake reception. [ABSTRACT FROM PUBLISHER]

The design of a novel ultrawideband printed-circuit antenna is presented. By using a stepped-patch in combination with multiple resonating elements, a bandwidth of more than 150% is obtained. The performance is demonstrated through measurements and calculations with a commercially available field solver. A phase center analysis shows very small variations over the entire available bandwidth. [ABSTRACT FROM AUTHOR]