Search

In this letter, we propose a novel method of edge filter linear demodulation using tilted fiber Bragg gratings (TFBGs) in a fiber sensor system. Based on the filter characteristics of TFBGs and the same temperature characteristics as the FBG, the strain sensor demodulation system with dynamic temperature compensation can be achieved. An experimental system is built up to achieve one or multichannels of sensor demodulation. The experimental results were analyzed in detail. Using this method based on intensity, linear demodulation with a bandwidth of 6 nm can be achieved. The advantages of this system are an all-fiber design, quasi-static and dynamic operation, and potential high-speed demodulation. [ABSTRACT FROM PUBLISHER]

This work reports on the experimental investigation of the spectral effects induced by uniform high refractive index nano-coatings deposited on weakly tilted fiber Bragg gratings (TFBGs). To this aim, weakly TFBGs with different tilt angles were fabricated and then coated with thin overlays of syndiotactic polystyrene. Automated dip coating technique was used to obtain ring-shaped coatings with thickness ranging in hundreds of nanometers. The transmission spectra of the obtained devices were collected in order to outline the effects of thickness, tilt angle, and surrounding refractive index. Experimental results reveal interesting differences with respect to the uncoated case, both in terms of spectral envelope and wavelength shifts related to cladding modes coupling. [ABSTRACT FROM PUBLISHER]

A wavelength monitor based on a pair of tilted fiber Bragg gratings is reported. The monitor exhibits a subpicometer wavelength selectivity over a broad wavelength range (>30 nm), and a low insertion loss (<1 dB) for laser light with polarization matching the reference polarization of the device. Simulations show that a wavelength coverage up to 100 nm is possible and that the resolution degradation due to changes in the polarization state can be avoided by proper design of the gratings. [ABSTRACT FROM PUBLISHER]

A novel method for measuring modal power distribution (MPD) in multimode fibers is proposed using built-in tilted fiber Bragg gratings (TFBGs). For each degenerated guided mode group, a portion of the guided power can be coupled to the corresponding radiation mode through a TFBG imprinted into the same fiber, and then measured separately with a spatial filter. The power coupling coefficients between the guided and radiation modes are obtained by solving a set of linearly independent equations acquired under a number of launching conditions. With these coefficients obtained, the MPD under any excitation condition can then be obtained by simply measuring the powers of radiation modes. The proposed method is successfully demonstrated with a few-mode fiber. [ABSTRACT FROM PUBLISHER]