Search

There is a relative lack of research on the development of creepage discharge in aged oil-paper insulation subjected to AC-DC combined voltage in converter transformers. In this study, based on the physical and chemical properties of oil-paper, we propose a sphere-plate electrode model to study the creepage discharge parameters and characteristic spectra of aged oil-paper subjected to AC-DC combined voltage. The results show that the creepage discharge inception voltage of aged oil-paper is related to the AC voltage component of the AC-DC combined voltage. However, when the DC voltage component is 60 kV, the flashover phenomenon was found to occur in one of the severely aged samples before the AC voltage was applied. Despite being subjected to the same DC voltage, the flashover phenomenon did not occur in three other samples aged to different degrees. Large-amplitude discharges were found to appear earlier in the severely aged samples. At the same creepage discharge stage, as the aging time of the oil-paper increased, the number of large-amplitude discharges was found to rapidly increase, and the time interval between adjacent discharges was found to gradually decrease. At each stage of the creepage discharge, the small-amplitude discharge has a “hump” shaped distribution. The larger the DC voltage component, the shorter the endurance time of aged oil-paper, and the more severe the damage to the oil-paper. The DC voltage component was found to have an accelerating effect on the development of creepage discharge in aged oil-paper insulation.

Researchers face difficulties in finding relevant papers to their research interest as the number of scientific publication is rapidly increasing on the web. Scientific paper recommenders have emerged as a leading solution to help researchers by automatically suggesting relevant and useful publications. Several approaches have been proposed on improving recommender systems. However, most existing approaches depend on priori user profiles, and thus they cannot recommend papers to new user. Furthermore, the existing approaches utilize non-public contextual information, and thus it cannot adequately find similarities between papers due to copyright restrictions. Also, the existing approaches consider only single level paper-citation relation to identify similarities between papers. Considering the above challenges, this paper presents a collaborative filtering based recommendation approach for scientific papers that does not depend on priori user profiles and which utilizes only public contextual information. Using citation context, we utilized 2-level paper-citation relations to find hidden associations between papers. The rational underlying this approach is that, two papers are co-occurred with same cited paper(s) and two papers are co-occurring with same citing paper(s) are significantly similar to some extent. To evaluate the performance of the proposed approach, publicly available datasets are used to conduct extensive experiments. The experimental results demonstrate that the proposed approach has significantly outperforms the baseline approaches in terms of precision, recall, F1, mean average precision, and mean reciprocal rank, which are commonly used information retrieval metrics. The novelty of this study is that, with the proposed approach, researchers are able to find relevant and useful publications over the internet regardless of their previous research experiences and research area.

This paper presents a broadband, simple, re-useable and low-cost approach for noninvasive sweat monitoring using a passive microwave circuit and a cellulose filter paper as a superstrate. The proposed sensor is composed of filter paper with the ability to absorb the sample liquid under test (LUT) placed on top of a coplanar waveguide (CPW) transmission line. Various samples of sodium chloride (NaCl) solutions with concentrations in the range of 0.01-2 mol/L and models of artificial sweat are used to test the proposed sensor. The difference in transmission coefficient (S21) between dry and wet states is used to determine the concentrations of tested solutions in the band of 1-6 GHz. The sensor detects concentrations as low as 0.01 mol/L (0.58 g/L) and quantities as low as 137 μL with a maximum sensitivity of 46.7 dB/g/L. The proposed sensor presents a simple approach to sample and characterize liquids with enhanced sensitivity and consistent performance using microwave signals.

In paper production, a jumbo reel is cut into multiple intermediate rolls, and each intermediate roll is then sheeted as finished goods. This problem is called a cutting stock problem and is proven to be NP-hard. The objective is to minimize material waste or trim loss from all the cuttings. In the case that any intermediate roll is not entirely used for its associated order, the intermediate roll itself could turn to be a dead stock. We use the concept of universal sizes of intermediate rolls to eliminate the dead stock. A pre-defined number of universal sizes of intermediate rolls is to be used to serve all the orders. The problem is solved using Reinforcement Artificial Bee Colony algorithm with Integer Linear Programming subroutine. This proposed approach is then tested with a set of 1,055 orders and 127 different sizes of sheet papers from a paper manufacturer. The results reveal that our method outperforms other algorithms. Our method offers the total trim loss of 3.51%, compared to the trim loss reported by the industry of at least 5%. This approach not only reduces the number of partially cut rolls, but also decreases the number of the jumbo reels needed to serve all the orders. Therefore, both the inventory cost and material cost can be saved.

The oil-paper insulation in power transformer is under a complicated environment, and there is little research on the combined effects of winding vibration-generated mechanical stress and thermal stress on the aging of insulating paper. To investigate the effects of combined mechanical-thermal stress on the aging properties of insulating paper, this paper carried out accelerated aging test using the as-designed mechanical-thermal stress combined aging oven in the aging environment at the temperature of 130 °C, and the mechanical stress intensities of 1 MPa, 1.5 MPa and 2 MPa. Besides, the degree of polymerization (DP), tensile strength, infrared spectroscopy, and scanning electron microscope (SEM) tests were performed on the aging paper samples. The test results suggested that, the combined mechanical-thermal aging might be regarded as thermal aging with lower degradation activation energy; the DP and tensile strength of insulating paper markedly declined during the mechanical-thermal aging process. At the same time, mechanical stress promoted the destruction of glycosidic bond, intramolecular and intermolecular hydrogen bonds, and increased the insulating paper cracks and holes. Typically, the above factors accelerated the aging of insulating paper. Finally, an improved degradation rate equation for insulating paper with consideration of mechanical stress was put forward.

The explicitly numerical or well-defined correlations between the dielectrics responses (DRs) and dielectric essences of oil-impregnated paper (OIP) insulation have not been fully understood yet. As a result, it is rather difficult to quantitatively diagnose the critical insulation condition, like determining moisture content in insulation paper (MCP) of power equipment only using electrical-based techniques such as frequency domain spectroscopy (FDS). To obtain MCP value, from a new perspective of parametric study on the circuital DR equivalence of OIP insulation-extended Debye model (EDM), the present contribution introduces a novel approach by exploring the pattern when EDM parameters vary with MCP and temperatures T. Further, mathematical correlations are developed between sensitive R-C values and MCP-T values. On the above analysis, small-scale physical models of real-life transformer bushings were prepared as test samples. Their OIP condenser bodies were artificially absorbed different controlled quantities of moisture and conditioned at different temperatures to record corresponding FDS results. Then a hybrid genetic algorithm combined with the Levenberg-Marquardt algorithm was proposed to estimate the EDM parameters by fitting the measured FDS data. Sensitive parameters therein were identified using subspectrum decomposition and formulated with MCP-T values so that a reliable moisture content estimation can be achieved once the testing temperature and FDS recordings of an insulation body are known.

Trap plays an important role in the charge transportation of three-layer oil-paper and the investigation of trap parameters at different degradation degree is of great significance for further research of the partial discharge (PD) mechanism. This article considers the turn-to-turn structure of on-board traction transformer. A defect model of three-layer oil-paper insulation was designed for PD test. The PD degradation samples are selected from the inception of PD to the breakdown of PD to study the characteristics of surface potential decay on degradation samples by using isothermal surface potential decay method. Given that, the trap distribution at different degradation stages was calculated and its influence on PD characteristics was investigated. The result shows that AC fluctuation voltages caused by inter-harmonic has a great influence on PD distribution, surface charge distribution and trap distribution. With the increase of degradation, the decay rate of surface potential increases and the decay rate of AC fluctuation voltages is larger than that pure AC. And also, the number of shallow trap with AC fluctuation voltages is larger than that with pure AC. The rate of free charge increases with the number of shallow trap increasing. More free electrons involves in the process of PD, accelerating the aging rate of three-layer oil paper samples. Therefore, it can be concluded that surface charge and trap distribution are helpful to clarify PD mechanism.

The oil-paper insulation system is widely used for the insulation purposes of power transformers as a result of its ability to withstand high thermal and electrical stresses. The presence of a gas cavity between impregnated papers layer is a serious problem. When localized breakdown takes place within this cavity, partial discharge (PD) occurs and ages the rest of the insulation system. This aging phenomenon declines the expected life time of the insulation system and subsequently the life time of the power transformers. Dissolved gas analysis is a recommended technique that is used in order to assess the state of the insulation system inside the transformers. In this paper, PD is recorded in the case of gas cavity presence between the layers of the impregnated papers under the effect of AC and DC voltage stress. This record is extended from the instance of PD inception until the breakdown of the whole insulation system. Furthermore, the concentration of the gases that dissolve in the insulating oil due to the aging of the impregnated paper is measured eight times during the record of the PD. Finally, the degradation of the insulating papers is studied optically through the use of a microscope at different stages of the aging test. Depending on PD measurements, dissolved gas analysis (DGA) results, and the optical study of the paper aging, the evolution of the aging of oil-paper insulation system as a result of internal PD is declared when AC and DC voltage stresses are applied. It is obtained that the aging evolutionary process totally differs with the alteration of the applied voltage.

Insulated tubular busbar is a new type of current-carrying equipment with excellent performance. However, the research on this equipment is insufficient because of the short application and the lack of technical digestion, which has resulted in many accidents. In this paper, the full-scale model of epoxy-impregnated-paper insulated tubular busbar with bubble defects was designed and produced, its electrical breakdown process was investigated by withstand voltage test. In the experiment, the failure mode of breakdown caused by gas expansion was found for the first time. The research showed that the electrical-mechanical breakdown process could be divided into two stages: gas increase stage and breakdown threshold stage. The research also obtained the characteristics and the change criterions of the two stages. The gas in the bubble defects generated from epoxy decomposition which caused by partial discharge. When the gas pressure exceeds the critical fracture toughness of the bubble defects wall, the unstable crack extension occurs, therefore, improving the ability about resistance to partial discharge of epoxy resin or improving the fracture toughness of epoxy resin by modifying would enhance the breakdown performance of insulated tubular busbar. The result also has reference significance for other epoxy-impregnated-paper insulated electrical equipment.

An electrical tree discharge model of multilayer insulation paper was prepared, and a voltage of 20 kV was used for electrical tree cultivation and initiation tests. Based on the microscopic image information and partial discharge (PD) information during the aging of the electrical tree, the development of electrical tree discharges between layers of paper comprising epoxy resin-impregnated paper insulation was studied. The results show that, by analysing PD information such as the discharge volume phase spectrum and the discharge repetition rate phase spectrum, the development of the electrical tree branch progresses in four stages: initial, growth, stagnation, and bursting. During the growth and stagnation stages, the main discharge paths of the electrical tree are mainly formed, and there are many filamentous fibres on the path edge. During the burst stage, more branches will be formed on the electrical tree, which will cause the greatest damage to the insulation. With the extension of the electrical tree path, the discharge magnitude and discharge times also increase. There are specific discharge patterns in different growth stages of the electrical tree, and the number of discharge events in each positive half-cycle is significantly greater than that in a negative half-cycle. Combining the microscopic image information and PD information during the aging of such an electrical tree, a theoretical basis for evaluating insulation state by PD monitoring is realised. The long-chain molecules of cellulose and epoxy resin break bonds and oxidise, which decompose into a large number of free radicals, monosaccharides, and other low-molecular-weight products.

This paper presents the design and analysis of a paper-based chipless RFID sensor for wetness content measurement in plant leaves. The sensor is designed using a passive microwave resonator to measure the ambient physical parameter. The resonator is designed with a rectangular loop inductively coupled with an interdigital capacitor. The experimental analysis of the designed sensor is illustrated here to prove its efficacy. The resonator provides adequate backscattered signal for wireless measurement in the microwave frequency band. When interrogated with a couple of UWB antennas and a VNA, it yields accurate leaf wetness response of the plant. The commercial competence of this sensing device is validated through its experimental analysis on three different types of leaf samples. This sensor is suitable for plant health monitoring in any small-scale gardening applications such as nurseries and greenhouses.

This paper investigates the impact of institutes and papers over time based on the heterogeneous institution-citation network. A new model, IPRank, is introduced to measure the impact of institution and paper simultaneously. This model utilises the heterogeneous structural measure method to unveil the impact of institution and paper, reflecting the effects of citation, institution, and structural measure. To evaluate the performance, the model first constructs a heterogeneous institution-citation network based on the American Physical Society (APS) dataset. Subsequently, PageRank is used to quantify the impact of institution and paper. Finally, impacts of same institution are merged, and the ranking of institutions and papers is calculated. Experimental results show that the IPRank model better identifies universities that host Nobel Prize laureates, demonstrating that the proposed technique well reflects impactful research. Refereed/Peer-reviewed

The low frequency section of frequency domain spectroscopy (FDS) of oil-paper insu- lation system can effectively reflect the ageing state and moisture of the oil-immersed paper. Meanwhile, steady-state insulation resistance is the one of indexes for the condition of transformer. In actual measurement, these two both are time-consuming and poor accessibility, thereby restraining their field applications. Aim at this problem, this paper analyses the polarization process of the oil-paper insulation in transformer, and adopts a low frequency equivalent circuit model for the oil-paper insulation to characterize the polarization process at low frequency. The simulated annealing particle swarm optimization (SAPSO) algorithm is proposed to identify the parameters in equivalent circuit, which are affected by change of insulation state. Compared with the experimental results, the errors of the steady-state insulation resistance and the tan δ below 10-3 Hz, which are calculated by the identified parameters, are less than 2.5%. This method can avoid the influence from external environment and reduce the measurement time. The time and frequency domain parameters calculated can provide reference for the ageing assessment of oil-immersed paper.

Kevlar pulp treated with low-temperature plasma and nano cellulose fibrils (NCFs) have been introduced as reinforcements in the preparation for composite insulating paper with low relative permittivity, dielectric loss, good mechanical properties, and thermal stability. More polar groups of Kevlar fibers could be exposed after plasma treatment. Results showed that the relative permittivity of the composite paper containing 20% Kevlar pulp, 10% NCF, and 70% softwood pulp is decreased by 29.6% and the dielectric loss is decreased by 43.2% at 50 Hz, 25°, compared with the conventional paper formed by pure softwood pulp. The change was due to the introduction of Kevlar pulp with intrinsic low dielectric constant and loss, which decreases the whole polarizability of the paper. The mechanical properties of the composite paper became worse after introducing 20% Kevlar pulp. About 10% NCF can work as a mechanical reinforcement to compensate for the tensile and Yang's modulus loss. Scanning electron microscopy results showed that NCF could fill the void defects and improve the interface bonding of the fibers to enhance the paper mechanical properties. The composite paper also had better insulating and thermal properties than the conventional paper. It has been concluded that the Kevlar pulp/NCF/softwood pulp composite paper has the potential to replace the pure softwood paper for the application of high-voltage ac transformer insulation.

Moisture content and aging of oil-paper insulation are two important factors that cause deterioration of the insulation performance of power transformers. The water molecules and aging products are polar, which affects the dielectric response characteristics of the insulation system. Currently, the dielectric response testing technology has realized non-destructive evaluation of the moisture content of transformer insulation. However, the changes in the dielectric response caused by aging products are easily concealed by the influence of moisture, which makes the diagnostic technology ineffective for use in the evaluation of the aging of the oil-paper system. In order to avoid drawback, a new method utilizing frequency domain dielectric spectroscopy (FDS) and the water balance characteristics of the oil-paper insulation is proposed in this paper to evaluate the aging state of oil-paper insulation. The aging of oil-paper insulation will affect the water balance between oil and paper. In this paper, the experimental studies have shown that the water distribution coefficient between oil and paper and the degree of polymerization (DP) of the insulating paper shows a significant linear relationship. Accordingly, in this paper, FDS curves were used to evaluate the moisture content in the insulating paper, oil samples were taken to measure the moisture content in oil, and then the ratio of moisture content in oil and paper were calculated as the aging characteristic parameter. The linear relationship between the characteristic parameter and DP was used to evaluate the aging state of oil-paper insulation. The feasibility of the proposed method is preliminarily verified using oil-paper insulation samples at different aging states and with different moisture levels in the laboratory.

This study explores the method of applying surface enhanced Raman scattering (SERS) in diagnosing the aging stage of oil-paper insulation equipment in the power system, which provides access to the on-line mornitoring of electrical equipment. Oil-paper samples in different aging stages were obtained by accelerated aging experiments. Effective Raman signals of insulating oil were collected by using the self-made hexagonal sliver nano-plates SERS substrates and the self-assembled Raman detection platform. For the SERS data of oil-paper insulation samples, kernel entropy component analysis (KECA) was applied to extract the Raman spectral features and support vector machine (SVM) was used to recognize the the aging stage of oil-paper insulation. The results demonstrate that the KECA-SVM method exhibits a good diagnostic capacity and the recognition accuracy of the propsed method reached 81.43 % (57/70). In summary, a new spectral method is proposed to diagnose the aging stage of oil-paper insulation, which lays a foundation for the actual diagnosis of the aging condition in running oil-paper insulation equipment by Raman spectroscopy.

Studying the moisture diffusion in non-oil-immersed insulation paper is helpful to optimize the drying process and improve the drying efficiency of oil-immersed equipment. Moisture diffusion factor (MDF) is the key parameter to describe the moisture diffusion in non-oil-immersed insulation paper. Thermal aging affects the moisture absorption capacity of insulation paper obviously, thus, this paper intends to modify the empirical expression of MDF by considering the effects of thermal aging. The transient moisture contents of non-oil-immersed insulation paper with different thicknesses were measured at 40 °C and 60 °C, respectively. Then, the experimental values of MDF were extracted, and the empirical expression of MDF was modified by considering the effects of thermal aging. Finally, the modified expression of MDF was verified. The following conclusion can be obtained: 1) the equilibrium time constant of non-oil-immersed insulation paper increases with thermal aging; 2) the moisture absorption rate of non-oil-immersed insulation paper decreases with thermal aging, and; 3) the modified expression of MDF is reasonable and effective.

Researchers from academia and the corporate-sector rely on scholarly digital libraries to access articles. Attackers take advantage of innocent users who consider the articles' files safe and thus open PDF-files with little concern. In addition, researchers consider scholarly libraries a reliable, trusted, and untainted corpus of papers. For these reasons, scholarly digital libraries are an attractive-target and inadvertently support the proliferation of cyber-attacks launched via malicious PDF-files. In this study, we present related vulnerabilities and malware distribution approaches that exploit the vulnerabilities of scholarly digital libraries. We evaluated over two-million scholarly papers in the CiteSeerX library and found the library to be contaminated with a surprisingly large number (0.3-2%) of malicious PDF documents (over 55% were crawled from the IPs of US-universities). We developed a two layered detection framework aimed at enhancing the detection of malicious PDF documents, Sec-Lib, which offers a security solution for large digital libraries. Sec-Lib includes a deterministic layer for detecting known malware, and a machine learning based layer for detecting unknown malware. Our evaluation showed that scholarly digital libraries can detect 96.9% of malware with Sec-Lib, while minimizing the number of PDF-files requiring labeling, and thus reducing the manual inspection efforts of security-experts by 98%.

Oil-immersed insulation paper (OIP) bushing is one of the most important equipment in power transmission and distribution systems. Moisture is one of the most serious factors that affect the insulation status of OIP bushing. In this paper, the OIP bushing was assumed to be in a stable and simplicity condition, and then the transient moisture distribution of capacitor core and its effects on the electric field were studied. First, by dissecting a 110 kV OIP bushing, the specific sizes for modelling were obtained. Afterwards, a moisture diffusion model for OIP bushing was established based on COMSOL Multiphysics software, and it was also verified by moisture diffusion experiment. Then, the moisture distribution for different conditions were obtained and analyzed. Finally, a model for the electric field of OIP bushing was established, and then the effects of moisture on the electric field were studied.

When the inner insulation of oil-impregnated paper bushing breaks down in service, gases decomposed by oil and paper may cause an explosion. The explosion of bushing occurs from time to time because of the lack of an effective monitoring method. In order to provide an effective online monitoring method for the bushing to avoid explosion, this paper presents a method to monitor the PD defect in bushing by measuring the inner pressure of bushing. In this paper, the relationship of variation between characteristic gases content and inner pressure is studied, the effect of inner temperature on inner pressure is analyzed and the method for reducing this effect is also presented, and the monitoring method is proved to be useful by PD tests on a real bushing. The results show that the inner pressure increases obviously due to the generation of characteristic gases by internal discharge in oil-impregnated paper bushing, and the pressure increases with the deterioration of the discharge; although the inner pressure has a great influence on the inner pressure, the influence can be reduced or eliminated greatly by the method of common-mode rejection. According to the results, the internal discharge defect of the oil-impregnated paper bushing can be detected by monitoring the pressure, and the bushing explosion can be avoided.