Search

We present an expansion to the Mars Global Digital Dune Database (MGD3) describing 1) bulk dune field composition determined by fitting a mineral spectral library to Thermal Emission Spectra (TES) data, and 2) a morphologic stability index that measures the degree of non-aeolian modification that has eroded and stabilized each dune field. This paper describes results for these two components, providing insight into global patterns of dune sand sources, postdepositional alteration, and mineral maturity. Consistent with the work of others, the main mineral components of each analyzed dune field are feldspar, pyroxene, and high-silica phases, with minor amounts of olivine and possibly sulfate minerals. Subtle global-scale spatial variations in olivine and feldspar abundances correspond with previously observed trends in surface mineralogy, suggesting that dune sand is reflective of its regional setting, and thus that aeolian sand has typically not traveled far (

We provide a historical context of the International Conference on Mars Polar Science and Exploration and summarize the proceedings from the 6th iteration of this meeting. In particular, we identify five key Mars polar science questions based primarily on presentations and discussions at the conference and discuss the overlap between some of those questions. We briefly describe the seven scientific field trips that were offered at the conference, which greatly supplemented conference discussion of Mars polar processes and landforms. We end with suggestions for measurements, modeling, and laboratory and field work that were highlighted during conference discussion as necessary steps to address key knowledge gaps.

Sediment maturity, or the mineralogical and physical characterization of sedimentary deposits, has been used to identify sediment sources, transport medium and distance, weathering processes, and paleoenvironments on Earth. Mature terrestrial sands are dominated by quartz, which is abundant in source lithologies on Earth and is physically and chemically stable under a wide range of conditions. Immature sands, such as those rich in feldspars or mafic minerals, are composed of grains that are easily physically weathered and highly susceptible to chemical weathering. On Mars, which is predominately mafic in composition, terrestrial standards of sediment maturity are not applicable. In addition, the martian climate today is cold and dry and sediments are likely to be heavily influenced by physical weathering rather than chemical weathering. Due to these large differences in weathering processes and composition, martian sediments require an alternate maturity index. This paper reports the results of abrasion tests conducted on a variety of mafic materials and results suggest that mature martian sediments may be composed of well sorted, well rounded, spherical polycrystalline materials, such as basalt. Volcanic glass is also likely to persist in a mechanical weathering environment while more fragile and chemically altered products are likely to be winnowed away. A modified sediment maturity index is proposed that can be used in future studies to constrain sediment source, paleoclimate, mechanisms for sediment production, and surface evolution. This maturity index may also provide insights into erosional and sediment transport systems and preservation processes of layered deposits.

A clarification for the enumeration of Mars years prior to 1955 is presented, along with a table providing the Julian Dates associated with Ls = 0° for Mars years −183 (beginning of the telescopic study of Mars) to 100. A practical algorithm for computing Ls as a function of the Julian Date is provided. No new science results are presented.

The Mars Global Digital Dune Database (MGD 3 ) is complete and now extends from 90°N to 90°S latitude. The recently released south pole (SP) portion (MC-30) of MGD 3 adds ∼60,000 km 2 of medium to large-size dark dune fields and ∼15,000 km 2 of sand deposits and smaller dune fields to the previously released equatorial (EQ, ∼70,000 km 2 ), and north pole (NP, ∼845,000 km 2 ) portions of the database, bringing the global total to ∼975,000 km 2 . Nearly all NP dunes are part of large sand seas, while the majority of EQ and SP dune fields are individual dune fields located in craters. Despite the differences between Mars and Earth, their dune and dune field morphologies are strikingly similar. Bullseye dune fields, named for their concentric ring pattern, are the exception, possibly owing their distinctive appearance to winds that are unique to the crater environment. Ground-based wind directions are derived from slipface (SF) orientation and dune centroid azimuth (DCA), a measure of the relative location of a dune field inside a crater. SF and DCA often preserve evidence of different wind directions, suggesting the importance of local, topographically influenced winds. In general however, ground-based wind directions are broadly consistent with expected global patterns, such as polar easterlies. Intriguingly, between 40°S and 80°S latitude both SF and DCA preserve their strongest, though different, dominant wind direction, with transport toward the west and east for SF-derived winds and toward the north and west for DCA-derived winds.

Recently acquired data from the High Resolution Imaging Science Experiment (HiRISE), Context (CTX) imager, and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the Mars Reconnaissance Orbiter ( MRO ) spacecraft were used to investigate the emplacement of the youngest flood-lava flow on Mars. Careful mapping finds that the Athabasca Valles flood lava is the product of a single eruption, and it covers 250,000 km 2 of western Elysium Planitia with an estimated 5000–7500 km 3 of mafic or ultramafic lava. Calculations utilizing topographic data enhanced with MRO observations to refine the dimensions of the channel system show that this flood lava was emplaced turbulently over a period of only a few to several weeks. This is the first well-documented example of a turbulently emplaced flood lava anywhere in the Solar System. However, MRO data suggest that this same process may have operated in a number of martian channel systems. The magnitude and dynamics of these lava floods are similar to the aqueous floods that are generally believed to have eroded the channels, raising the intriguing possibility that mechanical erosion by lava could have played a role in their incision.

The extensive impact cratering record on Mars combined with evidence from SNC meteorites suggests that a significant fraction of the surface is composed of materials subjected to variable shock pressures. Pressure-induced structural changes in minerals during high-pressure shock events alter their thermal infrared spectral emission features, particularly for feldspars, in a predictable fashion. To understand the degree to which the distribution and magnitude of shock effects influence martian surface mineralogy, we used standard spectral mineral libraries supplemented by laboratory spectra of experimentally shocked bytownite feldspar [Johnson, J.R., Horz, F., Christensen, P., Lucey, P.G., 2002b. J. Geophys. Res. 107 (E10), doi:10.1029/2001JE001517 ] to deconvolve Thermal Emission Spectrometer (TES) data from six relatively large (>50 km) impact craters on Mars. We used both TES orbital data and TES mosaics (emission phase function sequences) to study local and regional areas near the craters, and compared the differences between models using single TES detector data and 3 × 2 detector-averaged data. Inclusion of shocked feldspar spectra in the deconvolution models consistently improved the rms errors compared to models in which the spectra were not used, and resulted in modeled shocked feldspar abundances of >15% in some regions. However, the magnitudes of model rms error improvements were within the noise equivalent rms errors for the TES instrument [Hamilton V., personal communication]. This suggests that while shocked feldspars may be a component of the regions studied, their presence cannot be conclusively demonstrated in the TES data analyzed here. If the distributions of shocked feldspars suggested by the models are real, the lack of spatial correlation to crater materials may reflect extensive aeolian mixing of martian regolith materials composed of variably shocked impact ejecta from both local and distant sources.

A new model of albedo and emissivity of the martian seasonal caps represented as porous CO2 slabs containing spherical voids and dust particles is described. In the model, a radiative transfer model is coupled with a microphysical model in order to link changes in albedo and emissivity to changes in porosity caused by ice metamorphism. The coupled model is capable of reproducing temporal changes in the spectra of the caps taken by the Thermal Emission Spectrometer onboard the Mars Global Surveyor and it can be used as the forward model in the retrievals of the caps' physical properties (porosity, dust abundance, void and dust grain size) from the spectra. Preliminary results from such inversion studies are presented.

Following the work of Kieffer and Titus (2001, Icarus 154, 162–180), we present results of thermal IR observations of Korolev crater, located at ∼ 73 ° latitude in the martian northern polar region. Similar to techniques employed by Titus et al. (2003, Science 299, 1048–1050), we use infrared images from the Thermal Emission Imaging System (THEMIS) aboard Mars Odyssey to identify several regions within the crater basin with distinct thermal properties that correlate with topography. The THEMIS results show these regions exhibit temperature variations, spatially within the crater and throughout the martian year. In addition to the variations identified in the THEMIS observations, Mars Global Surveyor Thermal Emission Spectrometer (TES) observations show differences in albedo and temperature of these regions on both daily and seasonal cycles. Modeling annual temperature variations of the surface, we use TES observations to examine the thermal properties of these regions. This analysis reveals the crater interior deposits are likely thick layers (several meters) of high thermal inertia material (water ice, or extremely ice-rich regolith). Spatial variations of the physical properties of these regions are likely due to topography and possibly variations in the subsurface material itself. The nature of these deposits may help constrain polar processes, as well as provide context for the polar lander mission, Phoenix.

The Mars Global Surveyor thermal emission spectrometer has made observations of Mars' north polar region for nearly a full martian year. Measurements of bolometric emission and reflectance, as well as brightness temperatures in specific bands synthesized from thermal radiance spectra, are used to track the behavior of surface and atmospheric temperatures, the distribution of condensed CO 2 and H 2 O, and the occurrence of dust storms. CO 2 grain size in the polar night is variable in space and time, and is influenced by atmospheric conditions. Some specific locations display concentration of H 2 O frost and indicate the presence of long-term water-ice near the surface. Annual budgets of solid CO 2 range up to 1500 kg m −2 ; preliminary analysis suggests significant transport of energy into latitudes near 70°N during the polar night.