Search

The research on work-life balance (WLB) published in journals with a Scopus index between 2011 and 2022 is carefully examined in this work. Our research attempts to clarify the evolution and trends in WLB research and the importance of publications that Scopus indexes. After analyzing 2717 research articles, we found that WLB publications have a significant annual growth rate of 14.71 %, which suggests that the trend continues to grow. Significant changes are seen, with 1888 papers produced between 2017 and 2022 highlighting a notable increase in interest in the field. With 1608 papers, social sciences account for the majority of WLB research. With 54 publications, Griffith University (Australia) is the most affiliated institution. With 30 papers, the “Economic and Social Research Council of the United Kingdom” became the primary source of financing. The most prolific author, with nine publications, is Lingard H. At the same time, co-citation analysis reveals 168 co-cited authors. The United States (USA), the United Kingdom (U.K.), and Australia (A.U.) are the top three producing nations. A thematic analysis reveals ten major WLB themes, from work stress to difficulties with human resource management. This study provides crucial insights for policymakers and leaders to address work-life balance issues effectively. Using tools like Gephi or CiteSpace, we could deepen our understanding through advanced analysis methods such as page rank and network visualization.

The primary issues in the Himalayan Rivers are sediment and cavitation degradation of the hydroelectric power turbine components. During the monsoon season, heavy material is transported by streams in hilly areas like the Himalayas through regular rainfalls, glacial and sub-glacial hydrological activity, and other factors. The severe erosion of hydraulic turbines caused by silt abrasion in these areas requires hydropower facilities to be regularly shut down for maintenance, affecting the plant's overall efficiency. This article provides an in-depth examination of the challenges that can lead to cavitation, silt erosion, and a decrease in the efficiency of various hydroelectric turbines, and it demands attention on the design, manufacture, operation, and maintenance of the turbines. This study's main objective is to critically evaluate earlier theoretical, experimental, and numerical evaluation-based studies (on cavitation and silt erosion) that are provided and addressed throughout the study. As a part of this study, various strategies for mitigating the effects of these problems and elongating the time that turbine may be utilized before they must be replaced have been provided.

The present investigation focuses on assessing the water quality of groundwater surrounding brick kilns in the Jammu district of Jammu and Kashmir (J&K). At 43 different brick kiln sites in both north and south regions of Jammu, concentrations of heavy metals were measured using established techniques. The elements zinc, copper, iron, lead, cadmium, nickel, and manganese were analyzed utilizing an Atomic Absorption Spectrophotometer (AAS). The pollution load index value was consistently below unity across all sites, suggesting an absence of pollution and making the water suitable for consumption. The average concentrations, listed in ascending order, were found to be 0.38 mg/L for copper, 0.31 mg/L for zinc, 0.01 mg/L for iron, and 0.09 mg/L for manganese. Notably, concentrations of lead, cadmium, and nickel were found below the detectable levels. Evaluation of contamination factors revealed the sequence Cu > Fe > Zn > Mn, while the geo accumulation index followed the sequence Cu > Fe > Mn > Zn. Comparison of these findings with the established standards of World Health Organization and Bureau of Indian Standards indicated that the recorded ranges were within permissible limits. The study's outcomes suggest that heavy metal emissions from brick kilns may not significantly impact the quality of groundwater. Elevated copper levels found near brick kilns were likely to result from plumbing materials in the study area. Iron and manganese in groundwater seems to have geo-genic origin and not emission-related. This research represents a foundational step in examining groundwater contamination by heavy metals specifically in the neighborhood of brick kilns in Jammu district. It contributes to the establishment of a comprehensive database and serves as a reference point for future studies. Additionally, the study recommends regular monitoring of groundwater to ensure the maintenance of drinking water quality.

Micro-electrical discharge machining (μEDM) is severely affected by tool wear and its process variants, which can lead to compromised precision and dimensional disruptions in micro-part production. Several attempts have been made to address this problem by suggesting offline and online (real-time) tool wear compensation strategies. Research efforts in this area have intensified over the last 20 years. However, most methods proposed were applicable only for a few work-tool combinations and in limited input process parametric settings. Instead of tool wear compensation, several research articles have focused on strategies to reduce the negative impact of tool wear on the quality of fabricated parts. The present study systematically reviews various investigations conducted in this area and aims to add cutting-edge compensation for tool wear to future inquiries. The articles reviewed here are explored in detail. Critical findings/innovations are classified into four categories: tool wear in μEDM, tool wear compensation techniques, and offline and online compensation methods.

Multi-criteria decision-making (MCDM) methods have been widely used among researchers to provide a trade-off solution between best and worst, considering conflicting criteria and sets of preferences. An efficient and systematic literature review of these methods is needed to maintain their application in distinctive domains. To this end, this paper presents a comprehensive and systematic literature survey on “multi-objective optimization by ratio analysis” (MOORA) method and its fuzzy extensions developed and discussed in recent years. This review includes articles categorized based on the publication name, publishing year, journal name, type of applications, and type of fuzzy extensions. In addition, this review will enhance the understanding of practitioners and decision-makers on the MOORA method, its development, fuzzy hybridization, different application areas, and future work. The study revealed that the MOORA technique was predominantly used with the TOPSIS approach, followed by the AHP and COPRAS methods. Furthermore, 76.28 % use single and hybridization approaches among all MOORA studies, while 23.72 % use MOORA in a fuzzy environment.

The main objective of this work is to review the capability of using waste marble dust (MD) particles as reinforcing materials in recycled polymeric composites to achieve environmentally friendly materials. In the present study, polymer composites were fabricated from recycled polyethylene terephthalate (rPET) and MD and then analyzed for their structural and thermal properties. Preparation of rPET-based composites containing 0–20 wt% MD was carried out through extrusion and injection molding. For their characterization Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA) were applied. The DSC analysis revealed a nucleating effect of MD on rPET, which was manifested in a higher crystallization temperature (196.7 °C ⇒ 204.4 °C); however, the marble particles were also found to hamper chain mobility, thereby decreasing the crystallinity ratio (23.7 % ⇒ 19.2 %) of rPET and altering its crystalline structure. According to the TGA measurements, a slight increase occurred in the thermal stability of rPET, its major decomposition temperature increased from 446 °C to 451 °C when 20 wt% MD was incorporated into it. DMA showed an improved stiffness in the entire investigated temperature range for MD-filled composites versus neat rPET. Additionally, several factors were derived from the DMA data, including the effectiveness factor, degree of entanglement, and reinforcing efficiency factor which all suggested a decent interaction between the components indicating a proper reinforcing ability of marble powder. However, above 5 wt% MD content the reinforcing efficiency deteriorated due to the agglomeration of filler particles, which was also supported by scanning electron microscopic images.

Heat transfer in water with the help of solar energy is an effective way to harness renewable energy and reduce reliance on non-renewable sources of energy. The utilization of turbulent promoters is an efficient solution to ameliorate the performance of heat exchangers (HE). The current work summarizes the experimental and numerical behaviour of HE reported in the literature, including the thermal examinations of HT and fluid flow characteristics with various turbulent promoters and tube arrangements. This article reviews multiple studies in which different twisted tape (TT) geometry enhances the HT rate in various HE tubes. The current work also compares the thermal performance (η) of TT configurations in HE tubes using correlations developed by different investigators. Maximum heat transfer and minimum friction factor concerning fluid utilized in the system may also produce the optimal form for twisted tapes.

With the growing energy needs, a conscious effort has been made to use non-conventional energy sources to generate clean energy efficiently. Solar energy has always been popular among humanity. Using solar energy in heating applications is one of the most prominent ways to extract solar power. Various developments have been made to augment solar water heating system (SWHS) performance. Each modified design of SWHS has its advantages and disadvantages. Broadly, solar water heaters are categorized into two types: Flat plate solar collectors (FPSCs) and evacuated tube solar collectors (ETSCs). Earlier studies show that evacuated tube SWHS are more efficient than flat plate SWHS. Extensive research is going on the design modification of evacuated tube SWHS to enhance their efficiency. Firstly, the present review article briefly introduced the numerous types of solar collectors and their range of operation. The current work reviews various techniques used for heat transfer enhancement in SWHS, their advantages, and the region of applications. The article concentrates on research involving the usage of energy storage medium, nanomaterials, reflecting surfaces, and hybrid techniques for performance augmentation of ETSCs.

Soft robotics is an emerging area of research due to its safe interaction with humans; it also has exciting applications, such as wearable soft medical devices for rehabilitation, prosthetics, etc. Soft robots require soft actuators for performing desired movements, including bending, expansion, contraction, and twisting. This work focuses on bending-type multi-chambered extra-soft actuators actuated by pneumatic pressure. The corrugated design of a multi-chambered soft pneumatic actuator (SPA) is analyzed experimentally to observe the radial, longitudinal, and lateral expansions of different chambers, i.e., ballooning of the chambers under the application of air pressure. From the experimental study, it is observed that the ballooning mainly occurs at the free end of the actuator in a cantilever-type boundary condition, which could not be demonstrated by the computational solution using the finite element analysis (FEA). Moreover, it is observed that the effect of ballooning also disturbs the constant curvature profile of SPA. Therefore, a chamber-reinforcement solution is provided for minimizing the ballooning and ensuring the uniform bending of a SPA.