Search

A novel single-stage solvolysis process is demonstrated for recycling carbon fibers from an epoxy-based composite material using 50 wt% acetic acid solution under subcritical conditions. The process yields 100% fiber recovery efficiency in less than 30 min at 300 °C. Qualitative SEM/EDS analysis of the fibers reveals that the recovered fibers are entirely free of resin, and the carbon fiber surfaces were not damaged. SEM images and gravimetric measurements of the composites treated at lower temperatures and short residence times show an initial increase in mass of the CFRP samples, suggesting a two-step process consisting of initial composite swelling due to uptake of solvent, followed by depolymerization and chemical decomposition of the polymer. FTIR and GC-MS analyses confirm resin decomposition and production of aromatic and aliphatic compounds., Competing Interests: The authors declare no competing interests., (© 2022 The Author(s).)

Optimizing an industrial-scale supercritical water gasification process requires detailed knowledge of chemical reaction pathways, rates, and product yields. Laboratory-scale reactors are employed to develop this knowledge base. The rationale behind designs and component selection of continuous flow, laboratory-scale supercritical water gasification reactors is analyzed. Some design challenges have standard solutions, such as pressurization and preheating, but issues with solid precipitation and feedstock pretreatment still present open questions. Strategies for reactant mixing must be evaluated on a system-by-system basis, depending on feedstock and experimental goals, as mixing can affect product yields, char formation, and reaction pathways. In-situ Raman spectroscopic monitoring of reaction chemistry promises to further fundamental knowledge of gasification and decrease experimentation time. High-temperature, high-pressure spectroscopy in supercritical water conditions is performed, however, long-term operation flow cell operation is challenging. Comparison of Raman spectra for decomposition of formic acid in the supercritical region and cold section of the reactor demonstrates the difficulty in performing quantitative spectroscopy in the hot zone. Future designs and optimization of continuous supercritical water gasification reactors should consider well-established solutions for pressurization, heating, and process monitoring, and effective strategies for mixing and solids handling for long-term reactor operation and data collection.