Search

A new method of fast identification of copy papers by Fourier transform infrared spectroscopy (FTIR) was developed. The kinds of filler and the cellulosic degree of crystallinity were analyzed by FTIR, and the ageing curves of cellulosic paper were studied with heating and ultraviolet light. The cellulosic degree of crystallinity was showed by the ratio of absorbance at 1 429 cm(-1) to that at 893 cm(-1), the standard deviation of different brands of copy papers was 0.010 7-0.016 0, and the standard deviation of the same brands of copy papers was 0.014 8. The kinds of filler and the cellulosic degree of crystallinity were different in copy papers from different brands of different manufacturing plants, different brands of same manufacturing plants and different manufacturing times of the same brands from the same manufacturing plants, and the curves of ageing were different with heating and ultraviolet light. The results of fast identification of copy papers by FTIR are satisfactory.

Contents of pollutant elements lead and cadmium in toilet paper were determined by atomic absorption spectrometry. Both lead and cadmium has good linear relationship that lead is over the range of 0.00-10.00 micrograms.mL-1 (r = 0.9989) and cadmium is over the range of 0.00-4.00 micrograms.mL-1 (r = 0.9997). In this method, RSD is bellow 3.08% and recovery is over the range of 94.8%-104.5%. The method is simple and accurate. It can be used as monitor method of lead and cadmium in toilet paper.

The Chinese calligraphy is a unique art of traditional Chinese culture. The core of color preference for Chinese calligraphy is figural preference, which is a special kind of color combination preference. Currently, the exhibition of calligraphy is always lack of scientific basis in the aspect of color science. In this research, the influence of light sources and paper color on the preference of traditional calligraphy was analyzed based on subjective and objective experiments. The relative spectral power distribution of 5 typical light sources (correlated color temperature: 2 500, 3 500, 4 500, 5 500 and 6 500 K) and spectral reflectance of 5 typical Chinese rice papers (white, orange, light white, red, yellow-white) were firstly measured and then transformed into CIEXYZ and CIECAM02 color space, respectively. Subsequently, the correlation between those colors attributes and 1 000 series of psychophysical experiment data from 40 observers on calligraphy exhibiting preference was analyzed. At last, the influence factors of the correlation were discussed form a multiple statistical point of view, such as normal distribution, correlation analysis and multiple regression. The experimental results indicated that the exhibiting preference of Chinese calligraphy is obviously different with that of ordinary color preference cases, for it is mainly affected by the attributes of lighting sources instead of the contrast of hue and lightness. The authors believe that the finding of the research will provided effective support for the development of calligraphy exhibiting in near future for museums and gallaries.

In this paper, a novel paper-based Surface enhanced Raman spectroscopy (SERS) substrate with high sensitivity, good uniformity and popular price is developed via liquid/liquid interface self-assembly technique. Three pigment, rhodamine B, sunset yellow and chrysoidine were detected through paper-based SERS substrates using a portable Raman spectrometer. The structures of the three pigments were investigated and vibrational modes of characteristic peaks of three pigments were assigned. SERS spectra of rhodamine B, sunset yellow and chrysoidine in aqueous solution with different concentrations were detected respectively. Rhodamine B, sunset yellow and chrysoidine in drinks were also detected in drinks without any pretreatment. Within a certain range of concentrations, it meets certain function. For rhodamine B and sunset yellow, the relationship between concentration and Raman peak intensity is on an index curve, while for chrysoidine, the relationship is linear. In addition, high recoveries are achieved for detecting rhodamine B, sunset yellow and chrysoidine in drinks, which indicated our method is suited for semi-quantitative analysis for the concentration of rhodamine B, sunset yellow and chrysoidine in drinks. Surface-enhanced Raman spectroscopy provides an easy approach to fast and efficient detection for multiple pigments in drinks and can be used for quality control and market monitoring of drinks.

The current national standard method GB/T 27741-2011, i.e., "quantitative determination of migratable fluorescent whitening agents-UV spectroscopy", overestimates the migratable fluorescent whitening agents (FWA) in the paper based products because of the spectral interference of the leached lignin from the cellulose fibers. To minimize such interference, a spectroscopic method based on dual-wavelength (305 and 348 nm) measurement was proposed. It was observed that the dual-wavelength spectroscopy can effectively subtract the spectral absorption contributed by the leached lignin in the extraction medium, thus more accurately determination of migratable FWA can be performed. The results showed that the present method has a relative standard deviation of 2.17%, the quantitative detection limit of 16.9 mg x kg(-1), and recovery of 98%-103%. Compared with the current alternative standard-HPLC method, the present method possesses advantages of low operation and maintenance costs, simple, and practical in application. Therefore, it is more suitable for the rapid determination of migratable FWA in the product quality control in the production process and sample examination in the commercial market.

As one of the most important decorative materials for the modern household products, decorative papers impregnated with melamine not only have better decorative performance, but also could greatly improve the surface properties of materials. However, the appearance quality (such as color-difference evaluation and control) of decorative papers, as an important index for the surface quality of decorative paper, has been a puzzle for manufacturers and consumers. Nowadays, human eye is used to discriminate whether there exist color difference in the factory, which is not only of low efficiency but also prone to bring subjective error. Thus, it is of great significance to find an effective method in order to realize the fast recognition and classification of the decorative papers. In the present study, the visible spectroscopy coupled with principal component analysis (PCA) was used for the pattern recognition of decorative papers with different visual characteristics to investigate the feasibility of visible spectroscopy to rapidly recognize the types of decorative papers. The results showed that the correlation between visible spectroscopy and visual characteristics (L*, a* and b*) was significant, and the correlation coefficients wereup to 0.85 and some was even more than 0. 99, which might suggest that the visible spectroscopy reflected some information about visual characteristics on the surface of decorative papers. When using the visible spectroscopy coupled with PCA to recognize the types of decorative papers, the accuracy reached 94%-100%, which might suggest that the visible spectroscopy was a very potential new method for the rapid, objective and accurate recognition of decorative papers with different visual characteristics.

This paper quantitatively determined the migration level of benzo(a)pyrene (BaP) from paper cups into aqueous food simulants or fatty stimulants, under different conditions by second derivative constant-energy synchronous fluorescence spectrometry (DCESFS), which proved to be a method with high sensitivity and spectral resolution. The influences of food simulants, time and temperature on the relative migration percent(%) of benzo(a) pyrene were discussed. Results showed that the recoveries of this method ranged from 89.2% to 104.3%. The migration percent(%) of fatty stimulants was higher than that of aqueous simulants. Migration into hot water was also observed, while the migration into cool water was almost negligible. The relative migration percent(%) increased with the increase of time and temperature.

As one of the most powerful tools to investigate the compositions of raw materials and the property of pulp and paper, infrared spectroscopy has played an important role in pulp and paper industry. However, the traditional transmission infrared spectroscopy has not met the requirements of the producing processes because of its disadvantages of time consuming and sample destruction. New technique would be needed to be found. Fourier transform attenuated total reflection infrared spectroscopy (ATR-FTIR) is an advanced spectroscopic tool for nondestructive evaluation and could rapidly, accurately estimate the production properties of each process in pulp and paper industry. The present review describes the application of ATR-FTIR in analysis of pulp and paper industry. The analysis processes will include: pulping, papermaking, environmental protecting, special processing and paper identifying.

Metal elements, especially the heavy metal element, need to be considered for resource utilization of paper sludge. Seventeen kinds of metal elements were determined by ICP-AES method, which were form two kinds of paper sludge from Anhui Shanying paper mill, one kind of paper sludge from Fujian Qingshan paper mill, and one kind of paper sludge from Fujian Zhongzhu paper mill. The results show that there are different amounts of metal elements in the 4 kinds of paper sludge including poisonous metal elements, such as Cr, etc, metal element which is poisonous when excessive, such as Fe, etc, and P and K which are beneficial for plant growth Al and Ca contents are maximal. The recovery ratio for Fujian Zhongzhu paper mill obtained by standard addition method is 94.4%-107.3%. Heavy metal elements content lower than the national standard GB/4284-84 "Control standards for pollutions in sludge form agricultural use". The order of heavy metal elements content is paper sludge from Fujian Zhongzhu paper mill

Pitch deposit is one of the most troublesome problems for the paper mills in South China that use the masson pine as a raw material to make paper. The triglyceride has been identified as the main composition accounting for pitch problem. in order to set down effective pitch control scheme, the triglyceride content in papermaking process must be measured quantitatively. A method to measure the content of triglyceride in masson wood pulp was developed based on UV spectrophotometer in the present work. The UV spectrogram and characteristic peak location of standard glycerol trioleate as well as the effect of measuring time on absorbency were discussed. The results showed that at 412 nm the relation between absorbency and consistency of glycerol trioleate was linear and the pertinent coefficient reached 0. 971 in the range of reagent dosage and consistency in this experiment. The absorbency decreased linearly with measuring time and the pertinent coefficient reached 0. 990 2. The results of reproductive experiment showed that the recoveries were 98%-104%0 and the accuracy was 1. 27%-4. 03% for the samples in consistency 1. 25-0. 50 g x L(-1). With this method, the content of triglyceride in hexane extractive of masson TMP and acid SP were measured respectively. The degradative effect of triglyceride before and after enzyme treatment for masson wood pulp was also evaluated. The results showed that the triglyceride content was relatively high, about 50% both in the total extractive of masson TMP and acid SP. After enzyme treatment, the content of triglyceride in masson TMP and acid SP was reduced by 46. 31% and 35. 55% respectively.