Search

A state‐space model (SSM) of infiltration estimates daily groundwater recharge using time‐series of groundwater‐level altitude and meteorological inputs (liquid precipitation, snowmelt, and evapotranspiration). The model includes diffuse and preferential flow through the unsaturated zone, where preferential flow is a function of liquid precipitation and snowmelt rates and a threshold rate, above which there is direct recharge to the water table. Model parameters are estimated over seasonal periods and the SSM is coupled with the Kalman Filter (KF) to assimilate recent observations (hydraulic head) and meteorological inputs into recharge estimates. The approach can take advantage of real‐time hydrologic and meteorological data to deliver real‐time recharge estimates. The model is demonstrated on daily observations from two bedrock wells in carbonate aquifers of northwestern New York (USA) between 2013 and 2018. Meteorological inputs for liquid precipitation and snowmelt are compiled from SNODAS (2021). Results for recharge during winter and spring seasons show preferential flow events to the water table from liquid precipitation, snowmelt, or a combination of the two. Recharge estimates summed annually are consistent with previous estimates of recharge reported from groundwater flow and surface‐process models. Results from the SSM and KF point to errors in meteorological inputs, such as the snowmelt rate, that are not compatible with hydraulic head observations. Whereas liquid and solid precipitation are measured at discrete stations and extrapolated to 1‐km2 grid cells, snowmelt is a meteorological modeled outcome that may not represent conditions in the vicinity of monitoring well locations. Article Impact Statement: A state‐space model interprets time‐series of water table altitude, precipitation, and snowmelt to estimate groundwater recharge. [ABSTRACT FROM AUTHOR]

Abstract: Field characterization of a trichloroethene (TCE) source area in fractured mudstones produced a detailed understanding of the geology, contaminant distribution in fractures and the rock matrix, and hydraulic and transport properties. Groundwater flow and chemical transport modeling that synthesized the field characterization information proved critical for designing bioremediation of the source area. The planned bioremediation involved injecting emulsified vegetable oil and bacteria to enhance the naturally occurring biodegradation of TCE. The flow and transport modeling showed that injection will spread amendments widely over a zone of lower‐permeability fractures, with long residence times expected because of small velocities after injection and sorption of emulsified vegetable oil onto solids. Amendments transported out of this zone will be diluted by groundwater flux from other areas, limiting bioremediation effectiveness downgradient. At nearby pumping wells, further dilution is expected to make bioremediation effects undetectable in the pumped water. The results emphasize that in fracture‐dominated flow regimes, the extent of injected amendments cannot be conceptualized using simple homogeneous models of groundwater flow commonly adopted to design injections in unconsolidated porous media (e.g., radial diverging or dipole flow regimes). Instead, it is important to synthesize site characterization information using a groundwater flow model that includes discrete features representing high‐ and low‐permeability fractures. This type of model accounts for the highly heterogeneous hydraulic conductivity and groundwater fluxes in fractured‐rock aquifers, and facilitates designing injection strategies that target specific volumes of the aquifer and maximize the distribution of amendments over these volumes. [ABSTRACT FROM AUTHOR]