Search

Non-enzymatic electrochemical blood glucose sensors often suffer from issues such as requiring an alkaline environment, limited monitoring range, and poor anti-interference properties. Carbon substrates have been demonstrated to improve the performance of non-enzymatic sensors, but complex and energy-consuming manufacturing processes restrict their use. Herein, a simple and green approach for the preparation of 3D porous Au/Au-Pt networks (PAAPNs) is proposed using tissue paper for recycling as the nanomaterial substrate to deposit Au-Pt bimetallic nanoparticles. The unique structure of the PAAPNs sensor allows for low-potential operation (-1.0 V) with a wide monitoring range (-0.25 to 36 mM) in a neutral environment. Moreover, the sensor exhibited excellent selectivity (<10% response of interference) even without the use of an anti-interference outer membrane. Further investigation using density functional theory (DFT) simulation revealed the synergistic effect between Au and Pt in promoting glucose oxidation. Overall, this work provides a simple and low-carbon footprint method for creating carbon substrates from tissue paper for recycling, offering new opportunities for fabricating novel value-added nanomaterials for medical sensing applications. [ABSTRACT FROM AUTHOR]

Biodiesels produced from renewable sources exhibit superior fuel properties and renewability and they are more environmentally friendly than petroleum-based fuels. In this paper, a three-step transesterification, catalyzed by a pyridinium-based Brønsted acidic ionic liquid (BAIL), for biodiesel production was investigated using density functional theory (DFT) calculations at the B3LYP/6-311++G(d) level. The DFT results elucidate the detailed catalytic cycle, which involves the formation of a covalent reactant–BAIL–(methanol)n (n = 1/3) intermediate and two transition states. Hydrogen bond interactions were found to exist throughout the process of the catalytic cycle, which are of special importance for stabilizing the intermediate and transition states. Thus, a mechanism involving cooperative hydrogen bonding for BAIL-catalyzed biodiesel production was established. The Gibbs free energy profile based on the above mechanism was validated by the subsequent kinetic study. The trend of activation energy from kinetic mathematical models was reasonably consistent with that obtained from the DFT calculations. [ABSTRACT FROM AUTHOR]

The present report focuses on the solvent effect on furfural production from xylose in biphasic systems with methods including combined experiments, molecular dynamics (MD) simulations and density functional theory (DFT) calculations. Six most effective and commonly used biphasic solvents for furfural production were comparatively analyzed and discussed based on the kinetic study, partition coefficient, degradation behavior of furfural in organic solvents, distribution of solvent molecules around xylose/furfural molecules, hydrogen bonding, moving trajectories of xylose/furfural, and the solvation free energy. During the hydrothermal reaction of xylose to furfural in biphasic systems, it was found that the conversion efficiency of biphasic systems can be ordered as DCM/H2O > 2-MTHF/H2O > 2-butanol/H2O ≈ MIBK/H2O > CPME/H2O > toluene/H2O according to the xylose conversion and furfural yield, which are dominated by the solvation free energy (ΔGsol) of furfural in organic solvents, and also be affected by three other factors, namely, the maximum solubility of furfural in organic solvents, the ΔGsol value of organic solvents in water, and the side reaction of furfural in organic solvents. The degradation rate of furfural in 2-butanol was detected to be the fastest, and molecular dynamics simulation data showed that the hydrogen bonding between furfural and 2-butanol may accelerate the degradation of furfural. DCM has excellent extraction ability for furfural, and the maximum furfural yield in the DCM/H2O system (81.64%) is much higher than that in other systems during the hydrothermal reaction without additional catalysts. [ABSTRACT FROM AUTHOR]