Search

• A 3D THM coupled model for both hydraulic fracturing and heat extraction in hot dry rock. • The enhancement in permeability of the hydraulic fracturing stimulated fracture network can be demonstrated in this model. • The hydraulic fracturing and heat extraction over 10 years were carried on the planned Dikili EGS in Turkey. • The optimized re-injection rate was determined at 100 L/s with the average thermal capacity of 31.75 MWth. Geothermal energy attracts extensive attention for its excellent features like large capacity and lack of dependency on weather conditions. This paper presents a development of numerical model to study the hydraulic fracturing and heat extraction from geothermal reservoir, especially from brittle hot dry rock (HDR) reservoir. In this numerical model, an anisotropic damage model has been introduced based on Thermal-Hydraulic-Mechanical (THM) coupling code THOUGH2MP-FLAC3D and this damage-permeability model has also been integrated to demonstrate the enhancement in permeability of stimulated fracture network. Furthermore, numerical studies on planed Dikili enhanced geothermal system (EGS) were carried out by using newly developed model. As the simulated results show, a roughly circular fracture network is created, wherein simulated reservoir volume and area reaches to 49 million m3 and 1.41 million m2, respectively. The maximum permeability increases from initial permeability of 4 × 10−18 m2 to 7.52 × 10−14 m2 in z-direction. Based on these results, heat extraction calculations are performed for 10-years at different injection rates. The accumulated amount of produced net energy increases with the rising injection rate, while growth rate of the average thermal capacity over 10-year slows down. The production results suggest that an injection rate of 100 L/s can recover approximately 1.00 × 1016 J of thermal energy of over a 10-year period, with an average thermal capacity of 31.75 MWth. [ABSTRACT FROM AUTHOR]