Search

Methane is the second-most important greenhouse gas after carbon dioxide and accounts for around 10 % of total European Union greenhouse gas emissions. Given that the atmospheric methane budget over a region depends on its terrestrial and aquatic methane sources, inverse modelling techniques appear as powerful tools for identifying critical areas that can later be submitted to emission mitigation strategies. In this regard, an inverse modelling system of methane emissions for Europe is being implemented based on the Weather Research and Forecasting (WRF) model: the Aarhus University Methane Inversion Algorithm (AUMIA) v1.0. The forward modelling component of AUMIA consists of the WRF model coupled to a multipurpose global database of methane anthropogenic emissions. To assure transport consistency during the inversion process, the backward modelling component will be based on the WRF model coupled to a Lagrangian particle dispersion module. A description of the modelling tools, input data sets, and 1-year forward modelling evaluation from 1 April 2018 to 31 March 2019 is provided in this paper. The a posteriori methane emission estimates, including a more focused inverse modelling for Denmark, will be provided in a second paper. A good general agreement is found between the modelling results and observations based on the TROPOspheric Monitoring Instrument (TROPOMI) onboard the Sentinel-5 Precursor satellite. Model–observation discrepancies for the summer peak season are in line with previous studies conducted over urban areas in central Europe, with relative differences between simulated concentrations and observational data in this study ranging from 1 % to 2 %. Domain-wide correlation coefficients and root-mean-square errors for summer months ranged from 0.4 to 0.5 and from 27 to 30 ppb, respectively. On the other hand, model–observation discrepancies for winter months show a significant overestimation of anthropogenic emissions over the study region, with relative differences ranging from 2 % to 3 %. Domain-wide correlation coefficients and root-mean-square errors in this case ranged from 0.1 to 0.4 and from 33 to 50 ppb, respectively, indicating that a more refined inverse analysis assessment will be required for this season. According to modelling results, the methane enhancement above the background concentrations came almost entirely from anthropogenic sources; however, these sources contributed with only up to 2 % to the methane total-column concentration. Contributions from natural sources (wetlands and termites) and biomass burning were not relevant during the study period. The results found in this study contribute with a new model evaluation of methane concentrations over Europe and demonstrate a huge potential for methane inverse modelling using improved TROPOMI products in large-scale applications. [ABSTRACT FROM AUTHOR]

The Sentinel-5P TROPOspheric Monitoring Instrument (TROPOMI) instrument, launched in October 2017, provides unique observations of atmospheric trace gases at a high resolution of about 5 km, with near-daily global coverage, resolving individual sources like thermal powerplants, industrial complexes, fires, medium-scale towns, roads, and shipping routes. Even though Sentinel-5P (S5P) is a global mission, these datasets are especially well suited to test high-resolution regional-scale air quality (AQ) models and provide valuable input for emission inversion systems. In Europe, the Copernicus Atmosphere Monitoring Service (CAMS) has implemented an operational regional AQ forecasting capability based on an ensemble of several European models, available at a resolution of 0.1 ∘ × 0.1 ∘. In this paper, we present comparisons between TROPOMI observations of nitrogen dioxide (NO2) and the CAMS AQ forecasts and analyses of NO2. We discuss the different ways of making these comparisons and present quantitative results in the form of maps for individual days, summer and winter months, and a time series for European subregions and cities between May 2018 and March 2021. The CAMS regional products generally capture the fine-scale daily and averaged features observed by TROPOMI in much detail. In summer, the comparison shows a close agreement between TROPOMI and the CAMS ensemble NO2 tropospheric columns with a relative difference of up to 15 % for most European cities. In winter, however, we find a significant discrepancy in the column amounts over much of Europe, with relative differences up to 50 %. The possible causes for these differences are discussed, focusing on the possible impact of retrieval and modeling errors. Apart from comparisons with the CAMS ensemble, we also present results for comparisons with the individual CAMS models for selected months. Furthermore, we demonstrate the importance of the free tropospheric contribution to the estimation of the tropospheric column and thus include profile information from the CAMS configuration of the ECMWF's (European Centre for Medium-Range Weather Forecasts) global integrated model above 3 km altitude in the comparisons. We also show that replacing the global 1 ∘ × 1 ∘ a priori information in the retrieval by the regional 0.1 ∘ × 0.1 ∘ resolution profiles of CAMS leads to significant changes in the TROPOMI-retrieved tropospheric column, with typical increases at the emission hotspots up to 30 % and smaller increases or decreases elsewhere. As a spinoff, we present a new TROPOMI NO2 level 2 (L2) data product for Europe, based on the replacement of the original TM5-MP generated global a priori profile by the regional CAMS ensemble profile. This European NO2 product is compared with ground-based remote sensing measurements of six Pandora instruments of the Pandonia Global Network and nine Multi-AXis Differential Optical Absorption Spectroscopy (MAX-DOAS) instruments. As compared to the standard S5P tropospheric NO2 column data, the overall bias of the new product for all except two stations is 5 % to 12 % smaller, owing to a reduction in the multiplicative bias. Compared to the CAMS tropospheric NO2 columns, dispersion and correlation parameters with respect to the standard data are, however, superior. [ABSTRACT FROM AUTHOR]

In this study, we assess the skill of a stochastic weather generator (SWG) to forecast precipitation in several cities in western Europe. The SWG is based on a random sampling of analogs of the geopotential height at 500 hPa (Z500). The SWG is evaluated for two reanalyses (NCEP and ERA5). We simulate 100-member ensemble forecasts on a daily time increment. We evaluate the performance of SWG with forecast skill scores and we compare it to ECMWF forecasts. Results show significant positive skill score (continuous rank probability skill score and correlation) compared with persistence and climatology forecasts for lead times of 5 and 10 d for different areas in Europe. We find that the low predictability episodes of our model are related to specific weather regimes, depending on the European region. Comparing the SWG forecasts to ECMWF forecasts, we find that the SWG shows a good performance for 5 d. This performance varies from one region to another. This paper is a proof of concept for a stochastic regional ensemble precipitation forecast. Its parameters (e.g., region for analogs) must be tuned for each region in order to optimize its performance. [ABSTRACT FROM AUTHOR]

The parameterised description of subgrid-scale processes in the clear and cloudy boundary layer has a strong impact on the performance skill in any numerical weather prediction (NWP) or climate model and is still a prime source of uncertainty. Yet, improvement of this parameterised description is hard because operational models are highly optimised and contain numerous compensating errors. Therefore, improvement of a single parameterised aspect of the boundary layer often results in an overall deterioration of the model as a whole. In this paper, we will describe a comprehensive integral revision of three parameterisation schemes in the High Resolution Local Area Modelling – Aire Limitée Adaptation dynamique Développement InterNational (HIRLAM-ALADIN) Research on Mesoscale Operational NWP In Europe – Applications of Research to Operations at Mesoscale (HARMONIE-AROME) model that together parameterise the boundary layer processes: the cloud scheme, the turbulence scheme, and the shallow cumulus convection scheme. One of the major motivations for this revision is the poor representation of low clouds in the current model cycle. The newly revised parametric descriptions provide an improved prediction not only of low clouds but also of precipitation. Both improvements can be related to a stronger accumulation of moisture under the atmospheric inversion. The three improved parameterisation schemes are included in a recent update of the HARMONIE-AROME configuration, but its description and the insights in the underlying physical processes are of more general interest as the schemes are based on commonly applied frameworks. Moreover, this work offers an interesting look behind the scenes of how parameterisation development requires an integral approach and a delicate balance between physical realism and pragmatism. [ABSTRACT FROM AUTHOR]

This is the second of two papers that document the creation of the New European Wind Atlas (NEWA). In Part 1, we described the sensitivity experiments and accompanying evaluation done to arrive at the final mesoscale model setup used to produce the mesoscale wind atlas. In this paper, Part 2, we document how we made the final wind atlas product, covering both the production of the mesoscale climatology generated with the Weather Research and Forecasting (WRF) model and the microscale climatology generated with the Wind Atlas Analysis and Applications Program (WAsP). The paper includes a detailed description of the technical and practical aspects that went into running the mesoscale simulations and the downscaling using WAsP. We show the main results from the final wind atlas and present a comprehensive evaluation of each component of the NEWA model chain using observations from a large set of tall masts located all over Europe. The added value of the WRF and WAsP downscaling of wind climatologies is evaluated relative to the performance of the driving ERA5 reanalysis and shows that the WRF downscaling reduces the mean wind speed bias and spread relative to that of ERA5 from -1.50±1.30 to 0.02±0.78 m s -1. The WAsP downscaling has an added positive impact relative to that of the WRF model in simple terrain. In complex terrain, where the assumptions of the linearized flow model break down, both the mean bias and spread in wind speed are worse than those from the raw mesoscale results. [ABSTRACT FROM AUTHOR]

Atmospheric inversions are used to derive constraints on the net sources and sinks of CO 2 and other stable atmospheric tracers from their observed concentrations. The resolution and accuracy that the fluxes can be estimated with depends, among other factors, on the quality and density of the observational coverage, on the precision and accuracy of the transport model used by the inversion to relate fluxes to observations, and on the adaptation of the statistical approach to the problem studied. In recent years, there has been an increasing demand from stakeholders for inversions at higher spatial resolution (country scale), in particular in the framework of the Paris agreement. This step up in resolution is in theory enabled by the growing availability of observations from surface in situ networks (such as ICOS in Europe) and from remote sensing products (OCO-2, GOSAT-2). The increase in the resolution of inversions is also a necessary step to provide efficient feedback to the bottom-up modeling community (vegetation models, fossil fuel emission inventories, etc.). However, it calls for new developments in the inverse models: diversification of the inversion approaches, shift from global to regional inversions, and improvement in the computational efficiency. In this context, we developed LUMIA, the Lund University Modular Inversion Algorithm. LUMIA is a Python library for inverse modeling built around the central idea of modularity: it aims to be a platform that enables users to construct and experiment with new inverse modeling setups while remaining easy to use and maintain. It is in particular designed to be transport-model-agnostic, which should facilitate isolating the transport model errors from those introduced by the inversion setup itself. We have constructed a first regional inversion setup using the LUMIA framework to conduct regional CO 2 inversions in Europe using in situ data from surface and tall-tower observation sites. The inversions rely on a new offline coupling between the regional high-resolution FLEXPART Lagrangian particle dispersion model and the global coarse-resolution TM5 transport model. This test setup is intended both as a demonstration and as a reference for comparison with future LUMIA developments. The aims of this paper are to present the LUMIA framework (motivations for building it, development principles and future prospects) and to describe and test this first implementation of regional CO 2 inversions in LUMIA. [ABSTRACT FROM AUTHOR]

This is the first of two papers that document the creation of the New European Wind Atlas (NEWA). It describes the sensitivity analysis and evaluation procedures that formed the basis for choosing the final setup of the mesoscale model simulations of the wind atlas. The suitable combination of model setup and parameterizations, bound by practical constraints, was found for simulating the climatology of the wind field at turbine-relevant heights with the Weather Research and Forecasting (WRF) model. Initial WRF model sensitivity experiments compared the wind climate generated by using two commonly used planetary boundary layer schemes and were carried out over several regions in Europe. They confirmed that the most significant differences in annual mean wind speed at 100 m a.g.l. (above ground level) mostly coincide with areas of high surface roughness length and not with the location of the domains or maximum wind speed. Then an ensemble of more than 50 simulations with different setups for a single year was carried out for one domain covering northern Europe for which tall mast observations were available. We varied many different parameters across the simulations, e.g. model version, forcing data, various physical parameterizations, and the size of the model domain. These simulations showed that although virtually every parameter change affects the results in some way, significant changes in the wind climate in the boundary layer are mostly due to using different physical parameterizations, especially the planetary boundary layer scheme, the representation of the land surface, and the prescribed surface roughness length. Also, the setup of the simulations, such as the integration length and the domain size, can considerably influence the results. We assessed the degree of similarity between winds simulated by the WRF ensemble members and the observations using a suite of metrics, including the Earth Mover's Distance (EMD), a statistic that measures the distance between two probability distributions. The EMD was used to diagnose the performance of each ensemble member using the full wind speed and direction distribution, which is essential for wind resource assessment. We identified the most realistic ensemble members to determine the most suitable configuration to be used in the final production run, which is fully described and evaluated in the second part of this study. [ABSTRACT FROM AUTHOR]

Deep learning techniques (in particular convolutional neural networks, CNNs) have recently emerged as a promising approach for statistical downscaling due to their ability to learn spatial features from huge spatiotemporal datasets. However, existing studies are based on complex models, applied to particular case studies and using simple validation frameworks, which makes a proper assessment of the (possible) added value offered by these techniques difficult. As a result, these models are usually seen as black boxes, generating distrust among the climate community, particularly in climate change applications. In this paper we undertake a comprehensive assessment of deep learning techniques for continental-scale statistical downscaling, building on the VALUE validation framework. In particular, different CNN models of increasing complexity are applied to downscale temperature and precipitation over Europe, comparing them with a few standard benchmark methods from VALUE (linear and generalized linear models) which have been traditionally used for this purpose. Besides analyzing the adequacy of different components and topologies, we also focus on their extrapolation capability, a critical point for their potential application in climate change studies. To do this, we use a warm test period as a surrogate for possible future climate conditions. Our results show that, while the added value of CNNs is mostly limited to the reproduction of extremes for temperature, these techniques do outperform the classic ones in the case of precipitation for most aspects considered. This overall good performance, together with the fact that they can be suitably applied to large regions (e.g., continents) without worrying about the spatial features being considered as predictors, can foster the use of statistical approaches in international initiatives such as Coordinated Regional Climate Downscaling Experiment (CORDEX). [ABSTRACT FROM AUTHOR]

An operational multimodel forecasting system for air quality has been developed to provide air quality services for urban areas of China. The initial forecasting system included seven state-of-the-art computational models developed and executed in Europe and China (CHIMERE, IFS, EMEP MSC-W, WRF-Chem-MPIM, WRF-Chem-SMS, LOTOS-EUROS, and SILAMtest). Several other models joined the prediction system recently, but are not considered in the present analysis. In addition to the individual models, a simple multimodel ensemble was constructed by deriving statistical quantities such as the median and the mean of the predicted concentrations. The prediction system provides daily forecasts and observational data of surface ozone, nitrogen dioxides, and particulate matter for the 37 largest urban agglomerations in China (population higher than 3 million in 2010). These individual forecasts as well as the multimodel ensemble predictions for the next 72 h are displayed as hourly outputs on a publicly accessible web site (http://www.marcopolo-panda.eu , last access: 27 March 2019). In this paper, the performance of the prediction system (individual models and the multimodel ensemble) for the first operational year (April 2016 until June 2017) has been analyzed through statistical indicators using the surface observational data reported at Chinese national monitoring stations. This evaluation aims to investigate (a) the seasonal behavior, (b) the geographical distribution, and (c) diurnal variations of the ensemble and model skills. Statistical indicators show that the ensemble product usually provides the best performance compared to the individual model forecasts. The ensemble product is robust even if occasionally some individual model results are missing. Overall, and in spite of some discrepancies, the air quality forecasting system is well suited for the prediction of air pollution events and has the ability to provide warning alerts (binary prediction) of air pollution events if bias corrections are applied to improve the ozone predictions. [ABSTRACT FROM AUTHOR]

In 2008, the first volume of the European Geosciences Union (EGU) journal Geoscientific Model Development (GMD) was published. GMD was founded because we perceived there to be a need for a space to publish comprehensive descriptions of numerical models in the geosciences. The journal is now well established, with the submission rate increasing over time. However, there are several aspects of model publication that we believe could be further improved. In this editorial we assess the lessons learned over the first few years of the journal's life, and describe some changes to GMD's editorial policy, which will ensure that the models and model developments are published in such a way that they are of maximum value to the community. These changes to editorial policy mostly focus on improving the rigour of the review process through a stricter requirement for access to the materials necessary to test the behaviour of the models. Throughout this editorial, "must" means that the stated actions are required, and the paper cannot be published without them; "strongly encouraged" means that we encourage the action, but papers can still be published if the criteria are not met; "may" means that the action may be carried out by the authors or referees, if they so wish. We have reviewed and rationalised the manuscript types into five new categories. For all papers which are primarily based on a specific numerical model, the changes are as follows: - The paper must be accompanied by the code, or means of accessing the code, for the purpose of peer-review. If the code is normally distributed in a way which could compromise the anonymity of the referees, then the code must be made available to the editor. The referee/ editor is not required to review the code in any way, but they may do so if they so wish. - All papers must include a section at the end of the paper entitled "Code availability". In this section, instructions for obtaining the code (e.g. from a supplement, or from a website) should be included; alternatively, contact information should be given where the code can be obtained on request, or the reasons why the code is not available should be clearly stated. - We strongly encourage authors to upload any user manuals associated with the code. - For models where this is practicable, we strongly encourage referees to compile the code, and run test cases supplied by the authors where appropriate. - For models which have been previously described in the "grey" literature (e.g. as internal institutional documents), we strongly encourage authors to include this grey literature as a supplement, when this is allowed by the original authors. - All papers must include a model name and version number (or other unique identifier) in the title. It is our perception that, since Geoscientific Model Development (GMD) was founded, it has become increasingly common to see model descriptions published in other more traditional journals, so we hope that our insights may be of general value to the wider geoscientific community. [ABSTRACT FROM AUTHOR]

The prediction of climate on time scales of years to decades is attracting the interest of both climate researchers and stakeholders. The German Ministry for Education and Research (BMBF) has launched a major research programme on decadal climate prediction called MiKlip (Mittelfristige Klimaprognosen, Decadal Climate Prediction) in order to investigate the prediction potential of global and regional climate models (RCMs). In this paper we describe a regional predictive hindcast ensemble, its validation, and the added value of regional downscaling. Global predictions are obtained from an ensemble of simulations by the MPI-ESM-LR model (baseline 0 runs), which were downscaled for Europe using the COSMO-CLM regional model. Decadal hindcasts were produced for the 5 decades starting in 1961 until 2001. Observations were taken from the E-OBS data set. To identify decadal variability and predictability, we removed the long-term mean, as well as the long-term linear trend from the data. We split the resulting anomaly time series into two parts, the first including lead times of 1-5 years, reflecting the skill which originates mainly from the initialisation, and the second including lead times from 6-10 years, which are more related to the representation of low frequency climate variability and the effects of external forcing. We investigated temperature averages and precipitation sums for the summer and winter half-year. Skill assessment was based on correlation coefficient and reliability. We found that regional downscaling preserves, but mostly does not improve the skill and the reliability of the global predictions for summer half-year temperature anomalies. In contrast, regionalisation improves global decadal predictions of half-year precipitation sums in most parts of Europe. The added value results from an increased predictive skill on grid-point basis together with an improvement of the ensemble spread, i.e. the reliability. [ABSTRACT FROM AUTHOR]