Search

This paper describes the implementation and use of a mechanical cone penetration test (CPTm) database for the evaluation of the liquefaction potential in some areas of Tuscany. More specifically, the database contains 4500 CPTm covering an area of 1787 square km and mainly concerns some coastal areas of Tuscany. Available simplified liquefaction evaluation procedures (LEPs) are mainly based on piezocone CPT (CPTu) test results and not on CPTm. An early interest on developing LEPs with reference to CPTm became quite soon obsolete because of the widespread use of piezocone. Unfortunately, in Italy, the use of CPTm is very popular. After the 2012 seismic sequence of Emilia-Romagna, the use of CPTm for liquefaction risk analysis has seen a renewed interest, even though such a topic should require further studies. This paper shows an empirical approach for liquefaction triggering assessment by CPTm using existing LEPs, thus making possible the use of the developed CPTm database for the preliminary screening of the study area. [ABSTRACT FROM AUTHOR]

The Monti Pisani massif (Tuscany, central Italy) is an isolated mountain relief known for its rich geodiversity, including a remarkable palaeontological heritage from the Palaeozoic, Mesozoic and Cenozoic eras. The Palaeozoic record consists of exquisitely preserved plant remains and rarer invertebrates of Permo-Carboniferous age, which testify to extensive rainforests and large swamps that thrived in an alluvial system under a humid, (sub)tropical climate. In addition to invertebrate shells, invertebrate trace fossils and microbial structures, the Mesozoic record features a diverse Middle Triassic tetrapod ichnoassemblage consisting of tracks of lepidosauromorphs, archosaurs (among which are the earliest dinosauromorph fossils of Italy) and nonmammalian therapsids. These vertebrates lived in a subsiding costal setting that stretched across an expanding rift valley under a subarid climate. The Cenozoic record features abundant fossils of terrestrial vertebrates (including spectacular members of the mammalian megafauna) from karst deposits, testifying to the manifold inhabitants of the massif during the glacial and interglacial phases of the Late Pleistocene. Overall, this long-lasting fossil record remarkably demonstrates how much the Earth's environments have been changing through the Phanerozoic. The outstanding palaeontological heritage of the Monti Pisani area is in need of specific efforts of conservation and valorisation, especially with respect to the many palaeontological sites that punctuate the massif. [ABSTRACT FROM AUTHOR]

In this work, we evaluated the influence of root structure on shallow landslide distribution. Root density measurements were acquired in the field and the corresponding root cohesion was estimated. Data were acquired from 150 hillslope deposit trenches dug in areas either devoid or affected by shallow landslides within the Garfagnana Valley (northern Tuscany, Italy). Results highlighted a correlation between the root reinforcement and the location of measurement sites. Namely, lower root density was detected within shallow landslides, with respect to neighboring areas. Root area ratio (RAR) data allowed us to estimate root cohesion by the application of the revised version of the Wu and Waldron Model. Then, we propose a new method for the assimilation of the lateral root reinforcement into the infinite slope model and the limit equilibrium approach by introducing the equivalent root cohesion parameter. The results fall within the range of root cohesion values adopted in most of the physically based shallow landslide susceptibility models known in the literature (mean values ranging between ca. 2 and 3 kPa). Moreover, the results are in line with the scientific literature that has demonstrated the link between root mechanical properties, spatial variability of root reinforcement, and shallow landslide locations. [ABSTRACT FROM AUTHOR]

Variability in lithology and weathering degree affects physical and mechanical properties of rocks. In this study, we investigated the relationships between weathering degree and engineering geological properties of trachydacitic volcanic rocks from Monte Amiata (central Italy) by coupling field and laboratory analyses. We collected in situ Schmidt hammer tests in the field. We evaluated weathering quantifying the percentage of secondary minerals through thermal analysis in the laboratory. We also determined dry density ( ρ d ), specific gravity of solids (Gs), porosity (n) and two-dimensional (2D) porosity as resulted from scanning electron microscopy investigations. The results of our study indicate a negative linear correlation between Schmidt hammer rebound values and secondary mineral percentage. This correlation provides a tool to quantitatively estimate the deterioration of rock uniaxial compressive strength (UCS) as weathering increases. Moreover, thermal analysis turned out to be a quantitative and reproducible method to evaluate weathering degree of magmatic rocks. [ABSTRACT FROM AUTHOR]

The Pre-Mesozoic units exposed in the inner Northern Apennines mostly consist of Pennsylvanian-Permian successions unconformably deposited on a continental crust consolidated at the end of the Variscan orogenic cycle (Silurian-Carboniferous). In the inner Northern Apennines, exposures of this continental crust, Cambrian?-Devonian in age, have been described in Northern Tuscany, Elba Island (Tuscan Archipelago) and, partly, in scattered and isolated outcrops of southern Tuscany. This paper reappraises the most significant succession (i.e., Risanguigno Formation) exposed in southern Tuscany and considered by most authors as part of the Variscan Basement. New stratigraphic and structural studies, coupled with analyses of the organic matter content, allow us to refine the age of the Risanguigno Fm and its geological setting and evolution. Based on the low diversification of palynoflora, the content of sporomorphs, the structural setting and the new field study, this formation is dated as late Tournaisian to Visean (Middle Mississippian) and is not affected by pre-Alpine deformation. This conclusion, together with the already existing data, clearly indicate that no exposures of rocks involved in the Variscan orogenesis occur in southern Tuscany. [ABSTRACT FROM AUTHOR]

The present research illustrates the application of a methodological approach to studying the stress–strain distribution in a marble quarry of the Apuan Alps mining area (Italy). This study has been carried out in the framework of a project involving the University of Siena and the UOC Ingegneria Mineraria—USL Toscana Nord-Ovest, Tuscany Region. This stress–strain analysis aims foremost to monitor the slope stability conditions to guarantee a safe workplace for the personnel involved in mining activities, and to enable more sustainable long-term planning for excavation and production. The involved survey activities are as follows: (i) terrestrial laser scanning; (ii) engineering–geological data mapping; and (iii) in situ marble stress measuring through four CSIRO-type cell tests executed in different locations and at various depths within the underground excavation walls. The gathered data converged into numerical models of the quarry, both in 2D (DEM) and 3D (FEM), calibrated by in situ stress results through a rigorous back analysis assessment using least squares procedures. The created models represent a valuable tool for the identification and securing of risk areas and for future excavation planning in respect of the site efficiency and safety. [ABSTRACT FROM AUTHOR]

Downcutting and infill of incised valley systems is mostly controlled by relative sea-level changes, and studies on valley-fill successions accumulated independently from relative sea-level or lake-level oscillations are limited. This study focuses on the Plio-Pleistocene evolution of a fluvial drainage system developed in Southern Tuscany (Italy) following a regional marine forced regression at the end of Piacentian. Subsequent in-valley aggradation was not influenced by any relative sea-level rise, and valley morphological and depositional history mainly resulted from interaction between sediment supply and tectonic activity, which caused segmentation of the major valley trunk into localized subsiding depocenters separated by upwarping blocks. Fluvial sedimentation occurred until late Calabrian time, when the major river abandoned that valley, where minor fluvio-lacustrine depocenters allowed accumulation of siliciclastic and carbonate deposits. The present study demonstrates that the infill of the valley was not controlled by the forcing that caused its incision. Accumulation of the fluvial succession is discussed here in relation with localized, tectonic-controlled base levels, which commonly prevent from establishing of a clear downdip stratigraphic correlations. Chronological reconstruction of the study depositional dynamics provides solid constrains to frame them in the tectono-sedimentary evolution of the Northern Apennines. [ABSTRACT FROM AUTHOR]

We review and refine the geological setting of an area located nearby the Tyrrhenian seacoast, in the inner zone of the Northern Apennines (southern Tuscany), where a Neogene monzogranite body (estimated in about 3 km long, 1.5 km wide, and 0.7 km thick) emplaced during early Pliocene. This magmatic intrusion, known as the Gavorrano pluton, is partially exposed in a ridge bounded by regional faults delimiting broad structural depressions. A widespread circulation of geothermal fluids accompanied the cooling of the magmatic body and gave rise to an extensive Fe-ore deposit (mainly pyrite) exploited during the past century. The tectonic setting which favoured the emplacement and exhumation of the Gavorrano pluton is strongly debated with fallouts on the comprehension of the Neogene evolution of this sector of the inner Northern Apennines. Data from a new fieldwork dataset, integrated with information from the mining activity, have been integrated to refine the geological setting of the whole crustal sector where the Gavorrano monzogranite was emplaced and exhumed. Our review, implemented by new palynological, petrological and structural data pointed out that: (i) the age of the Palaeozoic phyllite (hosting rocks) is middle-late Permian, thus resulting younger than previously described (i.e., pre-Carboniferous); (ii) the conditions at which the metamorphic aureole developed are estimated at a temperature of c. 660 °C and at a depth lower than c. 6 km; (iii) the tectonic evolution which determined the emplacement and exhumation of the monzogranite is constrained in a transfer zone, in the frame of the extensional tectonics affecting the area continuously since Miocene. [ABSTRACT FROM AUTHOR]

The Tuscany Magmatic Province consists of a Miocene to Pleistocene association of a wide variety of rock types, including peraluminous crustal anatectic granites and rhyolites, calcalkaline and shoshonitic suites and ultrapotassic lamproites. In addition to the magma types already recognised, the occurrence of a new, distinct magma type at Capraia and Elba islands and in mafic enclaves in the San Vincenzo rhyolites has been suggested by recent studies. This particular type of magma, represented by intermediate to acidic calcalkaline rocks showing high Sr, Ba, and LREE, is restricted to the northwestern sector of the province and to a time interval of about 8 to 4.5 Ma. New data obtained on rocks from Capraia Island have allowed for the verification of the occurrence of this new magma type, the exploration of its origin and a discussion of its possible geodynamic significance. The high-Sr-Ba andesite-dacite rocks occurring in the Laghetto area at Capraia display a composition that is intermediate between adakitic and calcalkaline rocks. It is suggested that they represent a distinct type of magma that originated at mantle pressure by melting of the lower continental crust, followed by mixing with other Capraia magmas. The geodynamic model that best explains the composition of the studied rocks is the thickening of the continental crust during continental collision, followed by extension that favoured melting of the lower crust. [ABSTRACT FROM AUTHOR]

A sedimentary sequence of fluvial deposits preserved in the Corchia Cave (Alpi Apuane) provides new chronological constraints for the evolution of the cave system and the timing and rate of uplift of this sector of the Alpi Apuane since the late Pliocene. Supported by magnetostratigraphic analysis performed on fine-grained fluvial deposits, and by radiometric dating of speleothems, we suggest that the deposition of fluvial sediments occurred between ~1.6–1.2 Ma. This implies that the host volume of rock was already located close to the local base level, adding key information about the recent tectonic evolution of the Alpi Apuane. A few before ~1 Ma, an erosive phase occurred due to the base-level lowering, followed by continuous speleothem deposition since at least 0.97 Ma. From that time, Monte Corchia uplifted at a maximum rate of ~0.5 mm/year, which is consistent with isostatic uplift mainly driven by erosional unloading. The petrographical study of the fluvial deposits highlights the presence of material derived from the erosion of rocks that today are absent in the cave's catchment area, suggesting a different surface morphology during the Early Pleistocene. This study highlights the potential of cave sediments as archives for reconstructing the uplift history of mountain ranges. [ABSTRACT FROM AUTHOR]