Search

The middle Eocene Fulra Limestone Formation of the Kachchh Basin, western India was investigated to interpret depositional environments and sources of limestones based on facies analysis, mineralogy, and major, trace, and rare earth elements (REEs) geochemistry. Facies stacking pattern of the Fulra Limestone Formation exhibits an overall shallowing‐upward sedimentary succession developed in the middle to inner ramp to lagoonal set‐up. Staining of the thin sections and X‐ray diffraction patterns show dominance of calcite mineral. The CaO, ranging from 40.45% to 49.69%, is the dominant oxide among the major oxides followed by SiO2 (4.04–10.3%). The dominance of CaO over MgO suggests that the major mineral phase has been calcite and no dolomitization occurred during the deposition of the Fulra limestone. The low proportion of SiO2 and Al2O3 suggests low siliciclastic input during the precipitation of the Fulra limestone that is confirmed by the positive correlation of ∑REE with Al2O3, Fe2O3, Ni, Th, Sc, and Y and the negative correlation of SiO2, Al2O3, and Sr with CaO. The average value of REE contents in the Fulra Limestone Formation are lower (*16.02 ppm) than the average value of typical marine carbonates (*28 ppm). The Post‐Archean Australian Shale‐normalized REE + Y patterns of the Fulra limestone exhibit seawater like shale‐normalized REE + Y pattern, whereas slightly lower average value of Y/Ho ratio (34.60) than the typical seawater value (~44–74) suggests modification of the seawater, to some extent, by input of freshwater in a coastal environment. The REEs of the Fulra Limestone Formation have similarity with the carbonates of the Arabian Sea and/or shallow marine carbonates with exception of a few elements. It is envisaged from this study that the Fulra limestone was deposited in a shallow marine to coastal set‐up where mixing of the continental material in seawater was feasible. [ABSTRACT FROM AUTHOR]

A significant proportion of shale gas resources occurs in Lower Silurian Longmaxi Formation in southeast Sichuan Basin, South China, where commercial gas production has been achieved at Fuling Shale Gas Field. This study area is located adjacent to Fuling Jiaoshiba shale play. Elemental geochemistry regarding paleoenvironment aspects of lower Silurian Longmaxi shale gas is poorly understood. However, the samples in this study are representative, revealing the complete elemental geochemical characteristics of Longmaxi Shale. This research has analysed trace and rare earth elements of lower Silurian Longmaxi Shale and investigated the depositional environment, provenance, and tectonic settings when this type of shale formed. Sedimentary structures include horizontal lamination, massive lamination, and deformation structures that are well developed in black shale and grey silty shale of lower Silurian Longmaxi Formation. Gamma ray, total organic carbon, and pyrite contents are relatively higher in the lower part of the shale. The enrichment of sulfophile heavy metal elements (Cu, Zn, Pb, Mo, Ni) indicates that a reducing environment is common during the deposition of Longmaxi Formation. The concentration of rare earth elements is generally constant with relatively high concentration of light rare earth elements, stable concentration of heavy rare earth elements, and negative Eu anomalies. The sediments of Longmaxi Formation are derived primarily from the sedimentary rocks and granites in continental crust. The combination of trace and rare earth elements indicates that the tectonic settings of the provenance are continental island arc and active continental margin. [ABSTRACT FROM AUTHOR]

The North Qilian orogenic belt is the key in the exploration of the formation and assembly of Asia. The Early–Middle Devonian Xueshan Formation, which is deposited in the north area of North Qilian Orogenic Belt, is the most important for revealing the evolution basin–mountain transition of the North Qilian Belt. In order to reveal the tectonic evolution of the central orogenic belt in China and Paleozoic global plate reconstruction, it is necessary to perform provenance analysis of the Xueshan Formation. Eighteen samples were collected from Yumen and Yongchang profiles in the west of North Qilian Belt (WN), and 16 samples were obtained from Gulang and Jingtai profiles in the east of North Qilian Belt (EN). The compositions of clastic conglomerates and the sandstones suggested that felsic volcanic was the main source of the WN Xueshan Formation deposits and that the sedimentary and metamorphic rocks were the main source of the EN sediments. According to major geochemistry indexes, such as Al2O3/SiO2 ratio ranging from 0.08 to 0.37 and the chemical index of alteration less than 80, the source rocks were moderately weathered and of moderately matured. The samples from the EN were relatively enriched in Cr, Ni, Sc, and V elements and depleted in Hf element. However, those from the WN were enriched in Hf without the enrichment of Cr, Ni, Sc, or V. The samples from WN showed a strong negative Eu anomaly, but the samples from EN showed a weak negative Eu anomaly or a positive Eu anomaly. All the above geochemical characteristics suggested the prominent input of felsic clasts with granitic rocks into the WN. Meanwhile, the discrimination diagrams of trace elements implied that WN rocks were derived from continental island arc and that the EN rocks were derived from orogenic belt and the passive continental margin. The North China Plate subducted southwards and formed subduction‐related arc magmatism along the southern margin of the North Qilian Terrane during the Early–Middle Devonian. In conclusion, the WN is a fore‐arc basin, but EN is a foreland basin. [ABSTRACT FROM AUTHOR]

The East China Sea Shelf Basin (ECSSB) is an important tectonic unit of the western Pacific active continental margin. It is divided further into a series of sags and basement ridges. The Xihu Sag on the east margin of the ECSSB is an important hydrocarbon exploration area and contains significant petroleum resources. The Huagang Formation is the major reservoir in Xihu Sag, and its provenance has been the focus of debate at all times. The major and trace elements (including rare earth elements) compositions were analyzed for the Oligocene Huagang Formation sandstone and mudstone samples in the Xihu Sag. The provenance and tectonic setting of these clastic rocks are discussed. The Chemical Index of Alteration value and A–CN–K diagrams suggest low to moderate weathering in the source areas of the Huagang Formation. The mudstones have lower index of compositional variation values (<1), indicating that the mudstone samples are compositionally mature, whereas the index of compositional variation values for the sandstone samples (0.59 to 1.87) indicate that the sandstones are compositionally immature and mature. The major and trace element composition and ratios of the clastic rock samples indicate that mudstones are mainly from Late Mesozoic igneous rocks in SE China, which is dominated by the acidic volcanic rock. The provenance of sandstones is from two different directions, the Central Uplift Group of ECSSB and the Taiwan–Sinzi Fold Belt with more mafic volcanic rock. Based on the geochemical analysis of the clastic rock samples, the tectonic setting of Xihu Sag was Japanese‐type continental margin during the Huagang Formation deposition time (Oligocene). [ABSTRACT FROM AUTHOR]

The Al-Jawf area of northern Saudi Arabia provides spectacular outcrops of Early Devonian carbonate bioherms in the Wadi Murayr and Dumat Al-Jandal areas. These carbonate bioherms belong to the Qasr Member of the Late Pragian-Early Emsian Jauf Formation (~405 Ma) and are surrounded by a bioclastic carbonate succession. The Qasr Member is the first major carbonate unit of the Palaeozoic succession in Saudi Arabia that mainly consists of microbialite carbonates and metazoan reefs exhibiting distinct mound features. These bioherm complexes and their associated carbonate facies are pervasively dolomitized. Stratigraphic, petrographic and geochemical analyses were conducted to determine the facies distribution and interpret their depositional and diagenetic processes. A total of 11 facies are identified from a range of depositional environments within a carbonate platform system, ranging from tidal flats, lagoon, shoal, patch reefs to reef front. The main diagenetic processes are carbonate cementation and dolomitization. Dolomitization occurred as both fabric preserved (mostly in grain-dominated facies) and fabric destructive (mud-dominated facies). The microbialites and coralline sponges facies show poor reservoir with visual porosity less than 5%, but this succession may have a potential to serve as a good source for the underlying and overlying facies. Ooid and peloidal grainstone facies show fair to good visual porosity that locally exceeds 10% with intergranular porosity as the dominant type. However, in the most studied samples, vuggy and intraparticle porosities are observed as the dominant type. [ABSTRACT FROM AUTHOR]