Search

Abstract A genome-wide scan was performed in Large White and French Landrace pig populations in order to identify QTL affecting reproduction and production traits. The experiment was based on a granddaughter design, including five Large White and three French Landrace half-sib families identified in the French porcine national database. A total of 239 animals (166 sons and 73 daughters of the eight male founders) distributed in eight families were genotyped for 144 microsatellite markers. The design included 51 262 animals recorded for production traits, and 53 205 litter size records were considered. Three production and three reproduction traits were analysed: average backfat thickness (US_M) and live weight (LWGT) at the end of the on-farm test, age of candidates adjusted at 100 kg live weight, total number of piglets born per litter, and numbers of stillborn (STILLp) and born alive (LIVp) piglets per litter. Ten QTL with medium to large effects were detected at a chromosome-wide significance level of 5% affecting traits US_M (on SSC2, SSC3 and SSC17), LWGT (on SSC4), STILLp (on SSC6, SSC11 and SSC14) and LIVp (on SSC7, SSC16 and SSC18). The number of heterozygous male founders varied from 1 to 3 depending on the QTL.

Abstract A new multiple trait strategy based on discriminant analysis was studied for efficient detection of linked QTL in outbred sib families, in comparison with a multivariate likelihood technique. The discriminant analysis technique describes the segregation of a linear combination of the traits in a univariate likelihood. This combination is calculated for each pair of positions depending on the inheritance of the pairs of QTL haplotypes in the progeny. The gains in power and accuracy for position estimations of multiple trait methods in grid searches were evaluated in reference to single trait detections of linked QTL. The methods were applied to simulated designs with two correlated traits submitted to various effects from the linked QTL. Multiple trait strategies were generally more powerful and accurate than the single trait technique. Linked QTL were distinguished when they were separated enough to identify informative recombinations: at least two genetic markers and 25 cM between the QTL under the simulated conditions. Except in a particular case, discriminant analysis was at least as powerful as the multivariate technique and its implementation was five times faster. Combining the advantages from both methodologies, we finally propose a complete strategy for rapid and efficient systematic multivariate detections in outbred populations.

Abstract Quantitative trait loci (QTL) affecting fatness in male chickens were previously identified on chromosome 5 (GGA5) in a three-generation design derived from two experimental chicken lines divergently selected for abdominal fat weight. A new design, established from the same pure lines, produced 407 F2 progenies (males and females) from 4 F1-sire families. Body weight and abdominal fat were measured on the F2 at 9 wk of age. In each sire family, selective genotyping was carried out for 48 extreme individuals for abdominal fat using seven microsatellite markers from GGA5. QTL analyses confirmed the presence of QTL for fatness on GGA5 and identified a QTL by sex interaction. By crossing one F1 sire heterozygous at the QTL with lean line dams, three recombinant backcross 1 (BC1) males were produced and their QTL genotypes were assessed in backcross 2 (BC2) progenies. These results confirmed the QTL by sex interaction identified in the F2 generation and they allow mapping of the female QTL to less than 8 Mb at the distal part of the GGA5. They also indicate that fat QTL alleles were segregating in both fat and lean lines.

Abstract Quantitative trait loci (QTL) for abdominal fatness and breast muscle weight were investigated in a three-generation design performed by inter-crossing two experimental meat-type chicken lines that were divergently selected on abdominal fatness. A total of 585 F2 male offspring from 5 F1 sires and 38 F1 dams were recorded at 8 weeks of age for live body, abdominal fat and breast muscle weights. One hundred-twenty nine microsatellite markers, evenly located throughout the genome and heterozygous for most of the F1 sires, were used for genotyping the F2 birds. In each sire family, those offspring exhibiting the most extreme values for each trait were genotyped. Multipoint QTL analyses using maximum likelihood methods were performed for abdominal fat and breast muscle weights, which were corrected for the effects of 8-week body weight, dam and hatching group. Isolated markers were assessed by analyses of variance. Two significant QTL were identified on chromosomes 1 and 5 with effects of about one within-family residual standard deviation. One breast muscle QTL was identified on GGA1 with an effect of 2.0 within-family residual standard deviation.

Abstract The multitrait detections of QTL applied to a mixture of full- and half-sib families require specific strategies. Indeed, the number of parameters estimated by the multivariate methods is excessive compared with the size of the population. Thus, only multitrait methods based on a univariate analysis of a linear combination (LC) of the traits can be extensively performed. We compared three strategies to obtain the LC of the traits. Two linear transformations were performed on the overall population. The last one was performed within each half-sib family. Their powers were compared on simulated data depending on the frequency of the two QTL alleles in each of the grand parental populations of an intercross design. The transformations from the whole population did not lead to a large loss of power even though the frequency of the QTL alleles was similar in the two grand parental populations. In these cases, applying the within-sire family transformation improved the detection when the number of progeny per sire was greater than 100.

Abstract Segregation analyses were performed using both maximum likelihood – via a Quasi Newton algorithm – (ML-QN) and Bayesian – via Gibbs sampling – (Bayesian-GS) approaches in the Chinese European Tiameslan pig line. Major genes were searched for average ultrasonic backfat thickness (ABT), carcass fat (X2 and X4) and lean (X5) depths, days from 20 to 100 kg (D20100), Napole technological yield (NTY), number of false (FTN) and good (GTN) teats, as well as total teat number (TTN). The discrete nature of FTN was additionally considered using a threshold model under ML methodology. The results obtained with both methods consistently suggested the presence of major genes affecting ABT, X2, NTY, GTN and FTN. Major genes were also suggested for X4 and X5 using ML-QN, but not the Bayesian-GS, approach. The major gene affecting FTN was confirmed using the threshold model. Genetic correlations as well as gene effect and genotype frequency estimates suggested the presence of four different major genes. The first gene would affect fatness traits (ABT, X2 and X4), the second one a leanness trait (X5), the third one NTY and the last one GTN and FTN. Genotype frequencies of breeding animals and their evolution over time were consistent with the selection performed in the Tiameslan line.

Abstract A comparison of power and accuracy of estimation of position and QTL effects of three multitrait methods and one single trait method for QTL detection was carried out on simulated data, taking into account the mixture of full and half-sib families. One multitrait method was based on a multivariate function as the penetrance function (MV). The two other multitrait methods were based on univariate analysis of linear combination(s) (LC) of the traits. One was obtained by a principal component analysis (PCA) performed on the phenotypic data. The second was based on a discriminate analysis (DA). It calculates a LC of the traits at each position, maximising the ratio between the genetic and the residual variabilities due to the putative QTL. Due to its number of parameters, MV was less powerful and accurate than the other methods. In general, DA better detected QTL, but it had lower accuracy for the QTL effect estimation when the detection power was low, due to higher bias than the other methods. In this case, PCA was better. Otherwise, PCA was slightly less powerful and accurate than DA. Compared to the single trait method, power can be improved by 30% to 100% with multitrait methods.

Abstract A quantitative trait locus (QTL) analysis of carcass composition data from a three-generation experimental cross between Meishan (MS) and Large White (LW) pig breeds is presented. A total of 488 F2 males issued from six F1 boars and 23 F1 sows, the progeny of six LW boars and six MS sows, were slaughtered at approximately 80 kg live weight and were submitted to a standardised cutting of the carcass. Fifteen traits, i.e. dressing percentage, loin, ham, shoulder, belly, backfat, leaf fat, feet and head weights, two backfat thickness and one muscle depth measurements, ham + loin and back + leaf fat percentages and estimated carcass lean content were analysed. Animals were typed for a total of 137 markers covering the entire porcine genome. Analyses were performed using a line-cross (LC) regression method where founder lines were assumed to be fixed for different QTL alleles and a half/full sib (HFS) maximum likelihood method where allele substitution effects were estimated within each half-/full-sib family. Additional analyses were performed to search for multiple linked QTL and imprinting effects. Significant gene effects were evidenced for both leanness and fatness traits in the telomeric regions of SSC 1q and SSC 2p, on SSC 4, SSC 7 and SSC X. Additional significant QTL were identified for ham weight on SSC 5, for head weight on SSC 1 and SSC 7, for feet weight on SSC 7 and for dressing percentage on SSC X. LW alleles were associated with a higher lean content and a lower fat content of the carcass, except for the fatness trait on SSC 7. Suggestive evidence of linked QTL on SSC 7 and of imprinting effects on SSC 6, SSC 7, SSC 9 and SSC 17 were also obtained.

Abstract A quantitative trait locus (QTL) analysis of growth and fatness data from a three-generation experimental cross between Meishan (MS) and Large White (LW) pig breeds is presented. Six boars and 23 F1 sows, the progeny of six LW boars and six MS sows, produced 530 F2 males and 573 F2 females. Nine growth traits, i.e. body weight at birth and at 3, 10, 13, 17 and 22 weeks of age, average daily gain from birth to 3 weeks, from 3 to 10 weeks and from 10 to 22 weeks of age, as well as backfat thickness at 13, 17 and 22 weeks of age and at 40 and 60 kg live weight were analysed. Animals were typed for a total of 137 markers covering the entire porcine genome. Analyses were performed using two interval mapping methods: a line-cross (LC) regression method where founder lines were assumed to be fixed for different QTL alleles and a half-/full-sib (HFS) maximum likelihood method where allele substitution effects were estimated within each half-/full-sib family. Both methods revealed highly significant gene effects for growth on chromosomes 1, 4 and 7 and for backfat thickness on chromosomes 1, 4, 5, 7 and X, and significant gene effects on chromosome 6 for growth and backfat thickness. Suggestive QTLs were also revealed by both methods on chromosomes 2 and 3 for growth and 2 for backfat thickness. Significant gene effects were detected for growth on chromosomes 11, 13, 14, 16 and 18 and for backfat thickness on chromosome 8, 10, 13 and 14. LW alleles were associated with high growth rate and low backfat thickness, except for those of chromosome 7 and to a lesser extent early-growth alleles on chromosomes 1 and 2 and backfat thickness alleles on chromosome 6.

Abstract A three-step experimental design has been carried out to add evidence about the existence of the RN gene, with two segregating alleles RN- and rn+, having major effects on meat quality in pigs, to estimate its effects on production traits and to map the RN locus. In the present article, the experimental population and sampling procedures are described and discussed, and effects of the three RN genotypes on growth and carcass traits are presented. The RN genotype had no major effect on growth performance and killing out percentage. Variables pertaining to carcass tissue composition showed that the RN- allele is associated with leaner carcasses (about 1 s.d. effect without dominance for back fat thickness, 0.5 s.d. effect with dominance for weights of joints). Muscle glycolytic potential (GP) was considerably higher in RN- carriers, with a maximum of a 6.85 s.d. effect for the live longissimus muscle GP. Physico-chemical characteristics of meat were also influenced by the RN genotype in a dominant way, ultimate pH differing by about 2 s.d. between homozygous genotypes and meat colour by about 1 s.d. Technological quality was also affected, with a 1 s.d. decrease in technological yield for RN- carriers. The RN genotype had a more limited effect on eating quality. On the whole, the identity between the acid meat condition and the RN- allele effect is clearly demonstrated (higher muscle GP, lower ultimate pH, paler meat and lower protein content), and the unfavourable relationship between GP and carcass lean to fat ratio is confirmed.

Abstract Background In the case of an autosomal locus, four transmission events from the parents to progeny are possible, specified by the grand parental origin of the alleles inherited by this individual. Computing the probabilities of these transmission events is essential to perform QTL detection methods. Results A fast algorithm for the estimation of these probabilities conditional to parental phases has been developed. It is adapted to classical QTL detection designs applied to outbred populations, in particular to designs composed of half and/or full sib families. It assumes the absence of interference. Conclusion The theory is fully developed and an example is given.

Background: Coccidiosis is a major parasitic disease that causes huge economic losses to the poultry industry. Its pathogenicity leads to depression of body weight gain, lesions and, in the most serious cases, death in affected animals. Genetic variability for resistance to coccidiosis in the chicken has been demonstrated and if this natural resistance could be exploited, it would reduce the costs of the disease. Previously, a design to characterize the genetic regulation of Eimeria tenella resistance was set up in a Fayoumi × Leghorn F2 cross. The 860 F2 animals of this design were phenotyped for weight gain, plasma coloration, hematocrit level, intestinal lesion score and body temperature. In the work reported here, the 860 animals were genotyped for a panel of 1393 (157 microsatellites and 1236 single nucleotide polymorphism (SNP) markers that cover the sequenced genome (i.e. the 28 first autosomes and the Z chromosome). In addition, with the aim of finding an index capable of explaining a large amount of the variance associated with resistance to coccidiosis, a composite factor was derived by combining the variables of all these traits in a single variable. QTL detection was performed by linkage analysis using GridQTL and QTLMap. Single and multi-QTL models were applied. Results: Thirty-one QTL were identified i.e. 27 with the single-QTL model and four with the multi-QTL model and the average confidence interval was 5.9 cM. Only a few QTL were common with the previous study that used the same design but focused on the 260 more extreme animals that were genotyped with the 157 microsatellites only. Major differences were also found between results obtained with QTLMap and GridQTL. Conclusions: The medium-density SNP panel made it possible to genotype new regions of the chicken genome (including micro-chromosomes) that were involved in the genetic control of the traits investigated. This study also highlights the strong variations in QTL detection between different models and marker densities. [ABSTRACT FROM AUTHOR]

Background: For decades, genetic improvement based on measuring growth and body composition traits has been successfully applied in the production of meat-type chickens. However, this conventional approach is hindered by antagonistic genetic correlations between some traits and the high cost of measuring body composition traits. Marker-assisted selection should overcome these problems by selecting loci that have effects on either one trait only or on more than one trait but with a favorable genetic correlation. In the present study, identification of such loci was done by genotyping an F2 intercross between fat and lean lines divergently selected for abdominal fatness genotyped with a medium-density genetic map (120 microsatellites and 1302 single nucleotide polymorphisms). Genome scan linkage analyses were performed for growth (body weight at 1, 3, 5, and 7 weeks, and shank length and diameter at 9 weeks), body composition at 9 weeks (abdominal fat weight and percentage, breast muscle weight and percentage, and thigh weight and percentage), and for several physiological measurements at 7 weeks in the fasting state, i.e. body temperature and plasma levels of IGF-I, NEFA and glucose. Interval mapping analyses were performed with the QTLMap software, including single-trait analyses with single and multiple QTL on the same chromosome. Results: Sixty-seven QTL were detected, most of which had never been described before. Of these 67 QTL, 47 were detected by single-QTL analyses and 20 by multiple-QTL analyses, which underlines the importance of using different statistical models. Close analysis of the genes located in the defined intervals identified several relevant functional candidates, such as ACACA for abdominal fatness, GHSR and GAS1 for breast muscle weight, DCRX and ASPSCR1 for plasma glucose content, and ChEBP for shank diameter. Conclusions: The medium-density genetic map enabled us to genotype new regions of the chicken genome (including micro-chromosomes) that influenced the traits investigated. With this marker density, confidence intervals were sufficiently small (14 cM on average) to search for candidate genes. Altogether, this new information provides a valuable starting point for the identification of causative genes responsible for important QTL controlling growth, body composition and metabolic traits in the broiler chicken. [ABSTRACT FROM AUTHOR]