Search

This study focuses on the effects of interactions among bio-oil components on the formation of aromatic structures of bio-oil during its thermal treatment processes at various temperatures and heating rates. A bio-oil sample and its extracted fractions were pyrolyzed in a fixed-bed reactor at 300–800 °C at different temperatures and heating rates. The results show that the pyrolytic products (including the yields and aromatic structures) from raw bio-oil and its extracted fractions are significantly different, which proves the existence of the interactions between the aromatic components and light components of the bio-oil. Additionally, those interactions are determined by the pyrolysis temperature and heating rate to different extents, which further leads to the evolution of aromatic structures during the pyrolysis of bio-oil. For example, owing to the presence of the aromatic-poor fraction, the aromatic compounds (especially ≥ 2 rings) from the pyrolysis of bio-oil are less than that of the aromatic-rich fraction at relatively low temperatures (≤ 500 °C), especially at slow heating rates. This is because the polymerization, as the main interactions, promotes the transformation of more aromatic compounds (over wide range of ring sizes) into coke at these conditions. At fast heating rates, among the complex interactions, the self-gasification of bio-oil is intensified at high temperatures (≥ 700 °C), resulting in lower secondary coke yields and tar yields as well as the concentration of aromatic compounds (especially ≥ 2 rings). [ABSTRACT FROM AUTHOR]

Highlights • Effect of pre-reforming by Fe/bio-char catalyst on bio-oil reforming was studied. • Fe/bio-char pre-reforming increases the H 2 and CO yields from bio-oil reforming. • Fe/bio-char catalyst promotes the transformation of aromatics into light compounds. • Less coke was formed on Ni-based catalyst due to Fe/bio-char catalyst at 550–600 °C. • Pre-reforming promotes the formation of NiO and NiAl 2 O 4 on Ni-based catalyst. Abstract Ni-based catalyst is prone to the deactivation by coke deposition during the catalytic steam reforming of bio-oil. In order to optimize catalytic activity of the Ni-based catalyst, a two-stage catalytic reforming scheme was proposed whereby a low-temperature (350–600 °C) pre-reforming process with a less expensive catalyst was introduced prior to the Ni-based catalyst. To study this scheme, the reforming experiments with different combinations of Fe/bio-char (in the first stage) and Ni-Ca/γ-Al 2 O 3 (in the second stage) were conducted. In addition to the quantification of product yields, the tar and gas were characterized with an ultraviolet (UV) fluorescence spectroscopy, a gas chromatography/mass spectrometer (GC/MS) and a gas chromatography (GC). The results indicate that significant proportions of naphthalenes and polycyclic aromatics in the intermediate volatiles turned into furans, phenols and non-aromatics, which are easier to be reformed on Ni-based catalysts, via the Fe/bio-char pre-reforming, resulting in the increase of the final H 2 and CO yields of the overall process. At high pre-reforming temperatures (550–600 °C), the coke formation on Ni-based catalyst was significantly inhibited due to the Fe/bio-char pre-reforming. In addition, the results indicate that the spent Ni-based catalyst had more free NiO and NiAl 2 O 4 spinel than the fresh one, suggesting that the increase in the catalytic activity of Ni-based catalyst during the reforming process was promoted by Fe/bio-char pre-reforming. [ABSTRACT FROM AUTHOR]