Search

[Display omitted] • Pyrolysis technology can be successfully applied into RDF conversion. • Heating value of pyrolytic gas was estimated at the level about 24 MJ/m3. • Residence time significantly influences the pyrolytic gas composition. • Computer simulations predicted the chemical composition of pyrolytic gas. The current COVID-19 pandemic situation and the associated restrictions have increased the amount of generated waste. It results from the necessity to wear personal protective equipment. Thus, the disposal of masks and gloves is a topical issue and requires immediate investigation. The main aims of this work are management and environmental studies of municipal solid wastes (MSW), which have been generated during the COVID-19 pandemic time. Effective waste management in relation to a circular economy is presented. A sample of refuse derived fuel (RDF) with a high content of plastics was used for the experimental and calculation studies. Pyrolysis was selected as the best thermal decomposition process for this kind of wastes. Proximate and ultimate analyses were performed for RDF and its products. Pyrolysis was carried out using a pilot-scale reactor with a continuous flow of 250 kg/h at 900 °C. Thermogravimetric analysis was applied during the pyrolysis investigation and showed that the main decomposition of RDF took place in the temperature range of 250–500 °C. The pyrolysis gas contained combustible compounds like CO (19.8%), H 2 (13.2%), CH 4 (18.9%) and C 2 H 4 (7.1%), giving a high calorific value – 24.4 MJ/m3. The experimental results were implemented for numerical calculations. Chemkin-Pro software was applied to predict the chemical composition of the pyrolysis gas. The performed computer simulations demonstrated very good agreement with the results obtained during the experiments. They also indicated that there is a strong relationship between the chemical composition of the pyrolysis gas, the process temperature and residence time in the reactor. [ABSTRACT FROM AUTHOR]

[Display omitted] • A study of oat straw pyrolysis was performed at various temperatures. • Multifaceted analysis of gas, liquid and solid phases was carried out. • Pyrolytic gas quality increased with temperature. • Chemkin modelling of pyrolysis allowed to predict chemical composition of syngas. Biomass wastes are sustainable, renewable, and promising energy sources. In this study, the pyrolysis of agricultural biomass was investigated to determine the most promising process parameters for pyrolytic gas production. The pyrolysis investigations were carried out under nitrogen atmosphere at 300, 400, 500, and 600 °C on the microscale using simultaneous thermal analysis and a laboratory-scale semi-batch vertical reactor. The solid, liquid, and gaseous products were characterised in detail, including the elemental and chemical composition. The gas and liquid products analyses were provided. It was found that the quality of the pyrolytic gas increased with temperature, both in terms of the pyrolytic gas yield and concentration of gaseous components (hydrogen and methane), whereas the carbon dioxide concentration decreased with temperature. The condensed vapours were rich in phenolic and aromatic compounds, and it was noted that the acetic acid concentration increased with temperature. The chemical functional groups in the char were determined using infrared spectroscopy. The carbon content increased with temperature, whereas the hydrogen content decreased. Further decomposition of the organic matrix was observed with increasing temperature. Additionally, chemical modelling of pyrolytic gas was performed using Ansys Chemkin-Pro software and compared with the experimental results. The computational results showed a good correlation with the measured pyrolytic gas composition, especially in the case of the major gas components. [ABSTRACT FROM AUTHOR]