Search

Oil-immersed power transformers are considered to be one of the most crucial and expensive devices used in power systems. Hence, high-performance gas sensors have been extensively explored and are widely used for detecting fault characteristic gases dissolved in transformer oil which can be used to evaluate the working state of transformers and thus ensure the reliable operation of power grids. Hitherto, as a typical n-type metal-oxide semiconductor, tungsten trioxide (WO3) has received considerable attention due to its unique structure. Also, the requirements for high quality gas detectors were given. Based on this, considerable efforts have been made to design and fabricate more prominent WO3 based sensors with higher responses and more outstanding properties. Lots of research has focused on the synthesis of WO3 nanomaterials with different effective and controllable strategies. Meanwhile, the various morphologies of currently synthesized nanostructures from 0-D to 3-D are discussed, along with their respective beneficial characteristics. Additionally, this paper focused on the gas sensing properties and mechanisms of the WO3 based sensors, especially for the detection of fault characteristic gases. In all, the detailed analysis has contributed some beneficial guidance to the exploration on the surface morphology and special hierarchical structure of WO3 for highly sensitive detection of fault characteristic gases in oil-immersed transformers.

Hydrogen sulfide (H2S) is an important decomposition component of sulfur hexafluoride (SF6), which has been extensively used in gas-insulated switchgear (GIS) power equipment as insulating and arc-quenching medium. In this work, electrospun ZnO-SnO2 composite nanofibers as a promising sensing material for SF6 decomposition component H2S were proposed and prepared. The crystal structure and morphology of the electrospun ZnO-SnO2 samples were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. The composition of the sensitive materials was analyzed by energy dispersive X-ray spectrometers (EDS) and X-ray photoelectron spectroscopy (XPS). Side heated sensors were fabricated with the electrospun ZnO-SnO2 nanofibers and the gas sensing behaviors to H2S gas were systematically investigated. The proposed ZnO–SnO2 composite nanofibers sensor showed lower optimal operating temperature, enhanced sensing response, quick response/recovery time and good long-term stability against H2S. The measured optimal operating temperature of the ZnO–SnO2 nanofibers sensor to 50 ppm H2S gas was about 250°C with a response of 66.23, which was 6 times larger than pure SnO2 nanofibers sensor. The detection limit of the fabricated ZnO–SnO2 nanofibers sensor toward H2S gas can be as low as 0.5 ppm. Finally, a plausible sensing mechanism for the proposed ZnO–SnO2 composite nanofibers sensor to H2S was also discussed.

Tin oxide SnO2-based gas sensors have been widely used for detecting typical fault characteristic gases extracted from power transformer oil, namely, H2, CO, CO2, CH4, C2H2, C2H4, and C2H6, due to the remarkable advantages of high sensitivity, fast response, long-term stability, and so on. Herein, we present an overview of the recent significant improvement in fabrication and application of high performance SnO2-based sensors for detecting these fault characteristic gases. Promising materials for the sensitive and selective detection of each kind of fault characteristic gas have been identified. Meanwhile, the corresponding sensing mechanisms of SnO2-based gas sensors of these fault characteristic gases are comprehensively discussed. In the final section of this review, the major challenges and promising developments in this domain are also given.