Search

Cable tensile forces in winch-assist harvesting have been investigated in order to assess the safety concerns of the technology. However, the literature is lacking, particularly in regards to the impact of winch design. In this study, a Summit Winch Assist tethering a feller-director on ground slopes up to 77% was monitored for four days. The cable tensile forces were simultaneously recorded at the harvesting and anchor machine at a frequency of 100 Hz. Cameras and GNSS devices enabled a time study of the operations and the recording of machine positions. Winch functionality and design were disclosed by the manufacturer and used for the interpretation of the results. The cable tensile forces reached 296 kN at the harvesting machine and 260 kN at the anchor machine. The slow negotiation of obstacles while moving downhill recorded the highest peaks, mainly due to threshold settings of the winch in the brake system activation. Lower but significant peaks were also recorded during stationary work tasks. The peaks, however, were limited to a few events and never exceeded the endurance limit of the cable. Overall, the study confirmed recent findings in cable tensile force analysis of active winch-assist operations and provided evidence of the underlaying mechanisms that contribute to cable tensile forces.

Large timber availability after storms can lead to a drop in timber prices that can impact local markets. The Vaia storm, which occurred in Northeastern Italy at the end of October 2018, felled large volumes of timber, particularly spruce. To estimate the loss in volume and value connected to Vaia, data of roundwood sales from four local markets (Province of Trento, Province of Bolzano, Veneto Region and Friuli Venezia Giulia Region) were collected before and after Vaia, as well as reports on the status of salvage operations. The results confirm that Vaia had a strong impact on Northeastern Italy. A large area of the forest was hit and massive volumes of wood were affected. The analysis of prices showed a negative trend in the post-Vaia period due to an increase in volume per sale, especially for stumpage sales. It also highlighted the difficulties of storing the salvaged wood and the consequent fast saturation of the market. Although it was not possible to assess long-term effects on the four local markets, the presence and use of local e-commerce platforms proved useful in making roundwood sales more organized and efficient.

Chestnut forests represent an important environmental and landscape element in Europe, especially in the hill regions of southern Europe. In Italy, the total surface amount of chestnut forests is slightly expanded with 788,408 hectares, but orchards show a dramatic reduction (147,586 hectares or 20% of the total) and timber-producing stands a comparable expansion (605,888 hectares or 80%). The coppice management actually applied is considered one of the oldest forms of sustainable forest management. Over the years, coppice highlighted its versatility, resilience and multifunctionality. In this management system, in consideration of the &ldquo, frequent&rdquo, cutting cycles, special attention must be paid to forestry operations, because tree damage and soil compaction can trigger fungal disease and soil erosion. Frequent and repeated machine traffic increases the risk for soil degradation derived from compaction, topsoil removal and general disturbance. This study covered different forest areas and mechanization levels, in order to evaluate if the extent, type and severity of soil disturbance changed with site characteristics and logging technique. Furthermore, the study sought to obtain a better knowledge about the recovery time required for restoring the original soil properties after a disturbance has occurred. The findings showed that physical, chemical, and biological soil features were only partially disturbed by the coppicing and again that a high level of specialized mechanization does not generate heavier soil impact compared with the smaller and lighter machines deployed under the traditional and intermediate mechanization scenarios. Soil recovery in the impacted areas is already measurable one year after harvest and may be complete within the eight year&mdash, that is halfway through the standard rotation applied in the region to chestnut coppice.

Large scale windthrow salvage logging is increasing in Central Europe because of the growth of severe atmospheric events due to global heating. Sustainable forest operations in these conditions are challenging in terms of both productivity performances and safety of the operations. Fully mechanized harvesting systems are the preferred solution on trafficable terrains and proper slopes. However, different work methods and logistic organization of the operations could largely change the overall performances. The study observed three harvesting sites based on fully mechanized cut-to-length systems and located in areas affected by the Vaia storm, which hit north-eastern Italy in October 2018. The objectives were to estimate forwarder productivity in salvage logging in difficult terrain and to identify significant variables affecting this productivity under real working conditions. Time and motion studies were carried out and covered 59.9 PMH15, for a total of 101 working cycles, extracting a total volume of 1277 m3 of timber. Average time consumption for each site was 38.7, 42.2, and 25.1 PMH15 with average productivity of 22.5, 18.5, and 29.4 m3/PMH15, respectively, for Sites A, B, and C. A total of seven explanatory variables significantly affected forwarder productivity. Average load volume, maximum machine inclination during loading, and number of logs positively affected the productivity. On the contrary, travel distance, load volume, maximum ground slope during moving and loading have a negative influence. With an average travel distance of 500 m, the productivity resulted 20.52, 16.31, and 23.03 m3/PMH15, respectively, for Sites A, B, and C. An increase of 200 m of travel distance causes a decrease in productivity of 6%.