Search

Ocimum gratissimum (OG) is a species rich in essential oils (EO), which is known for its antimicrobial and antioxidant properties. This study aimed to encapsulate the essential oil of Ocimum gratissimum (OGE), determine its chemical composition, and evaluate its antioxidant and antimicrobial activities against six pathogenic bacteria, comparing it with the free essential oil (OGF). The EO was extracted by hydrodistillation using a Clevenger-type apparatus, and an oil-in-water emulsion was prepared using a combination of biopolymers: maltodextrin (MA), cashew gum (CG), and inulin (IN). The chemical profile was identified using gas chromatography–mass spectrometry (GC–MS). Antioxidant activity was assessed using the Oxygen Radical Absorbance Capacity with fluorescein (ORAC-FL) method, while the Minimum Inhibitory Concentrations (MIC) and Minimum Bactericidal Concentrations (MBC) were determined by the microdilution method. Microparticles were formed using the spray-drying method, achieving an encapsulation efficiency of 45.2%. The analysis identified eugenol as the main compound both before and after microencapsulation. The OGE microparticles demonstrated high inhibitory and bactericidal effects against S. aureus, S. choleraesuis, and E. coli, with MIC values of 500 µg·mL−1 and MBC values of 1000 µg·mL−1, as well as antioxidant activity of 1914.0 µmol-TE·g−1. Therefore, it can be inferred that the EO of OG maintained its antimicrobial and antioxidant effects even after microencapsulation by spray-drying, making it a promising natural ingredient. [ABSTRACT FROM AUTHOR]

Cheese powder is a product resulting from the removal of moisture from cheese. At first, cheese emulsion is prepared by dissolving cheese(s) with water and calcium sequestering salts followed by drying. The desirable characteristics of cheese powder are high solubility, no lumps, storage stability, and imparting a typical cheesy flavor to the final product. Many current studies on cheese powder are focused on reducing calcium-sequestering salts (CSSs) to reduce the sodium content of cheese powder. This review discusses the production processes and physio-chemical properties of cheese emulsions and powders, aiming to enhance current understanding and identifying potential research gaps. Furthermore, strategies for producing cheese powder without CSSs, including pH adjustment, homogenization, and addition of dairy components such as buttermilk powder and sodium caseinate, are elaborated upon. Processing variables such as heating conditions during the preparation of cheese emulsion may vary with the type and age of the cheese used and product formulation. These conditions also effect the characteristics of cheese powders. On the other hand, producing a stable cheese emulsion without CSSs is challenging due to impaired emulsification of fat. The combined use of buttermilk powder and sodium caseinate among various alternatives has shown promising results in producing cheese powder without CSSs. However, future research on replacing CSSs should focus on combining two or more strategies together to produce cheese powder without CSSs. The combination of pH adjustment and dairy ingredients and the use of novel processing technologies with different ingredients are interesting alternatives. [ABSTRACT FROM AUTHOR]

Prickly ash peel oleoresin (PPO) is a highly concentrated oil of Prickly ash essential oil and has a stronger aroma. However, its low water solubility, high volatility, difficulty in transport and storage, and decomposition by light, heat, and oxygen limit its wider application. To solve this problem, this study used freeze-drying or spray-drying, with soybean protein isolate (SPI) or gum Arabic (GA), combined with aqueous maltodextrin (MD) as the encapsulating agents to prepare four types of PPO microcapsules (POMs). Spray-dried microcapsules with GA as the encapsulating agent achieved a high encapsulation efficiency (EE) of 92.31 ± 0.31%, improved the thermal stability of the PPO, and had spherical morphology. (Headspace solid-phase microextraction/gas chromatography–mass spectrometry) HS-SPME/GC-MS detected 41 volatile compounds in PPO; of these, linalool, β-myrcene, sabinene, and D-limonene were identified as key flavor components. Principal component analysis (PCA) effectively distinguished the significant differences in flavor between PPO, spray-dried SPI/MD microcapsules (SS), and spray-dried GA/MD microcapsules (SG). During 15 days of air-exposure, the loss of flavor from SG (54.62 ± 0.54%) was significantly lower than PPO (79.45 ± 1.45%) and SS (57.55 ± 0.36%). During the air-exposure period, SG consistently had the highest antioxidant capacity, making it desirable for PPO packaging, and expanding its potential applications within the food industry. [ABSTRACT FROM AUTHOR]

Spray-drying is a commonly used method for producing powdered flavors, but the high temperatures involved often result in the loss of volatile molecules. To address this issue, our study focused on a novel approach: developing O/W Pickering emulsions with agri-food byproducts to encapsulate and protect D-limonene during spray-drying and storage. Emulsions formulated with lupin hull, lupin-byproduct (a water-insoluble protein–fiber byproduct derived from the production of lupin protein isolate), and camelina press-cake were subjected to spray-drying at 160 °C. The results revealed that these emulsions exhibited good stability against creaming. The characteristics of the dry emulsions (powders) were influenced by the concentration of byproducts. Quantitative analysis revealed that Pickering emulsions enhanced the retention of D-limonene during spray-drying, with the highest retention achieved using 3% lupin hull and 1% camelina press-cake. Notably, lupin-stabilized emulsions yielded powders with enhanced oxidative stability compared to those stabilized with camelina press-cake. Our findings highlight the potential of food-grade Pickering emulsions to improve the stability of volatile flavors during both processing and storage. [ABSTRACT FROM AUTHOR]

The long-chain omega-3 fatty acids alpha linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) have proven health benefits, but it is not common to find them together in a processed food product. This could lead to healthier and more functional food products, which may have positive implications for consumer health and well-being. This work aimed to fortify a model burger manufactured with fillets of an Amazonian fish (boquichico, Prochilodus nigricans) by adding microencapsulated sacha inchi oil (Plukenetia volubilis, rich in ALA) (MSIO) produced by spray-drying. MSIO was incorporated into the burgers at different levels (0, 3, 4, 5, and 6%). The burgers were characterized by their proximal composition, cooking losses, texture profile, lipid oxidation, sensory profile, overall liking, and fatty acid profile. The results showed that adding MSIO up to concentrations of 5% or 6% increased the instrumental hardness, chewiness, and lipid oxidation in the burgers. However, fortifying the burgers with 3% MSIO was possible without affecting the burgers' sensory properties and overall liking. Regarding the fatty acid profile, the burgers with 3% MSIO had a higher content of polyunsaturated fatty acids, with the ALA, EPA, and DHA types of fatty acids. Therefore, we recommend using this fortification concentration, but future studies should be carried out to improve the oxidative stability of MSIO and the burgers. [ABSTRACT FROM AUTHOR]

Ocimum gratissimum (OG) is a species rich in essential oils (EO), which is known for its antimicrobial and antioxidant properties. This study aimed to encapsulate the essential oil of Ocimum gratissimum (OGE), determine its chemical composition, and evaluate its antioxidant and antimicrobial activities against six pathogenic bacteria, comparing it with the free essential oil (OGF). The EO was extracted by hydrodistillation using a Clevenger-type apparatus, and an oil-in-water emulsion was prepared using a combination of biopolymers: maltodextrin (MA), cashew gum (CG), and inulin (IN). The chemical profile was identified using gas chromatography–mass spectrometry (GC–MS). Antioxidant activity was assessed using the Oxygen Radical Absorbance Capacity with fluorescein (ORAC-FL) method, while the Minimum Inhibitory Concentrations (MIC) and Minimum Bactericidal Concentrations (MBC) were determined by the microdilution method. Microparticles were formed using the spray-drying method, achieving an encapsulation efficiency of 45.2%. The analysis identified eugenol as the main compound both before and after microencapsulation. The OGE microparticles demonstrated high inhibitory and bactericidal effects against S. aureus, S. choleraesuis, and E. coli, with MIC values of 500 µg·mL−1 and MBC values of 1000 µg·mL−1, as well as antioxidant activity of 1914.0 µmol-TE·g−1. Therefore, it can be inferred that the EO of OG maintained its antimicrobial and antioxidant effects even after microencapsulation by spray-drying, making it a promising natural ingredient.

The aim of this work is to develop different encapsulated propolis ingredients by spray-drying and to evaluate their bioaccessibility using simulated in vitro digestion. To achieve these goals, first, microparticles of a propolis extract with inulin as the coating polymer were prepared under the optimal conditions previously determined. Then, a fraction of inulin was replaced with other encapsulating agents, namely sodium alginate, pectin, and chitosan, to obtain different ingredients with controlled release properties in the gastrointestinal tract. The analysis of the phenolic profile in the propolis extract and microparticles showed 58 compounds tentatively identified, belonging mainly to phenolic acid derivatives and flavonoids. Then, the behavior of the free extract and the formulated microparticles under gastrointestinal conditions was studied through an in vitro gastrointestinal digestion process using the INFOGEST protocol. Digestion of the free extract resulted in the degradation of most compounds, which was minimized in the encapsulated formulations. Thus, all developed microparticles could be promising strategies for improving the stability of this bioactive extract under gastrointestinal conditions, thereby enhancing its beneficial effect. [ABSTRACT FROM AUTHOR]

Cheese powder is a product resulting from the removal of moisture from cheese. At first, cheese emulsion is prepared by dissolving cheese(s) with water and calcium sequestering salts followed by drying. The desirable characteristics of cheese powder are high solubility, no lumps, storage stability, and imparting a typical cheesy flavor to the final product. Many current studies on cheese powder are focused on reducing calcium-sequestering salts (CSSs) to reduce the sodium content of cheese powder. This review discusses the production processes and physio-chemical properties of cheese emulsions and powders, aiming to enhance current understanding and identifying potential research gaps. Furthermore, strategies for producing cheese powder without CSSs, including pH adjustment, homogenization, and addition of dairy components such as buttermilk powder and sodium caseinate, are elaborated upon. Processing variables such as heating conditions during the preparation of cheese emulsion may vary with the type and age of the cheese used and product formulation. These conditions also effect the characteristics of cheese powders. On the other hand, producing a stable cheese emulsion without CSSs is challenging due to impaired emulsification of fat. The combined use of buttermilk powder and sodium caseinate among various alternatives has shown promising results in producing cheese powder without CSSs. However, future research on replacing CSSs should focus on combining two or more strategies together to produce cheese powder without CSSs. The combination of pH adjustment and dairy ingredients and the use of novel processing technologies with different ingredients are interesting alternatives.

Propolis is a well-known natural antibacterial substance with various biological activities, such as anti-inflammatory and antioxidant activity. However, applications of propolis are limited due to its low water solubility. In this study, propolis microcapsules were developed with a core material of ethanol extract of propolis and shell materials of gum arabic and β-cyclodextrin using a spray-drying technique. The optional processing formula, particle size distribution, morphology, dissolution property, and antibacterial activity of propolis microcapsules were determined. The results showed that the optional processing obtained an embedding rate of 90.99% propolis microcapsules with an average particle size of 445.66 ± 16.96 nm. The infrared spectrogram and thermogravimetric analyses showed that propolis was embedded in the shell materials. The propolis microcapsules were continuously released in water and fully released on the eighth day, and compared to propolis, the microcapsules exhibited weaker antibacterial activity. The minimum inhibitory concentrations (MICs) of propolis microcapsules against Escherichia coli and Staphylococcus aureus were 0.15 and 1.25 mg/mL, and their minimum bactericidal concentrations (MBCs) were 0.3 and 1.25 mg/mL, respectively. This water-soluble propolis microcapsule shows the potential for use as a sustained-release food additive, preservative, or drug. [ABSTRACT FROM AUTHOR]

Prickly ash peel oleoresin (PPO) is a highly concentrated oil of Prickly ash essential oil and has a stronger aroma. However, its low water solubility, high volatility, difficulty in transport and storage, and decomposition by light, heat, and oxygen limit its wider application. To solve this problem, this study used freeze-drying or spray-drying, with soybean protein isolate (SPI) or gum Arabic (GA), combined with aqueous maltodextrin (MD) as the encapsulating agents to prepare four types of PPO microcapsules (POMs). Spray-dried microcapsules with GA as the encapsulating agent achieved a high encapsulation efficiency (EE) of 92.31 ± 0.31%, improved the thermal stability of the PPO, and had spherical morphology. (Headspace solid-phase microextraction/gas chromatography–mass spectrometry) HS-SPME/GC-MS detected 41 volatile compounds in PPO; of these, linalool, β-myrcene, sabinene, and D-limonene were identified as key flavor components. Principal component analysis (PCA) effectively distinguished the significant differences in flavor between PPO, spray-dried SPI/MD microcapsules (SS), and spray-dried GA/MD microcapsules (SG). During 15 days of air-exposure, the loss of flavor from SG (54.62 ± 0.54%) was significantly lower than PPO (79.45 ± 1.45%) and SS (57.55 ± 0.36%). During the air-exposure period, SG consistently had the highest antioxidant capacity, making it desirable for PPO packaging, and expanding its potential applications within the food industry.

Spray-drying is a commonly used method for producing powdered flavors, but the high temperatures involved often result in the loss of volatile molecules. To address this issue, our study focused on a novel approach: developing O/W Pickering emulsions with agri-food byproducts to encapsulate and protect D-limonene during spray-drying and storage. Emulsions formulated with lupin hull, lupin-byproduct (a water-insoluble protein–fiber byproduct derived from the production of lupin protein isolate), and camelina press-cake were subjected to spray-drying at 160 °C. The results revealed that these emulsions exhibited good stability against creaming. The characteristics of the dry emulsions (powders) were influenced by the concentration of byproducts. Quantitative analysis revealed that Pickering emulsions enhanced the retention of D-limonene during spray-drying, with the highest retention achieved using 3% lupin hull and 1% camelina press-cake. Notably, lupin-stabilized emulsions yielded powders with enhanced oxidative stability compared to those stabilized with camelina press-cake. Our findings highlight the potential of food-grade Pickering emulsions to improve the stability of volatile flavors during both processing and storage.

The long-chain omega-3 fatty acids alpha linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) have proven health benefits, but it is not common to find them together in a processed food product. This could lead to healthier and more functional food products, which may have positive implications for consumer health and well-being. This work aimed to fortify a model burger manufactured with fillets of an Amazonian fish (boquichico, Prochilodus nigricans) by adding microencapsulated sacha inchi oil (Plukenetia volubilis, rich in ALA) (MSIO) produced by spray-drying. MSIO was incorporated into the burgers at different levels (0, 3, 4, 5, and 6%). The burgers were characterized by their proximal composition, cooking losses, texture profile, lipid oxidation, sensory profile, overall liking, and fatty acid profile. The results showed that adding MSIO up to concentrations of 5% or 6% increased the instrumental hardness, chewiness, and lipid oxidation in the burgers. However, fortifying the burgers with 3% MSIO was possible without affecting the burgers’ sensory properties and overall liking. Regarding the fatty acid profile, the burgers with 3% MSIO had a higher content of polyunsaturated fatty acids, with the ALA, EPA, and DHA types of fatty acids. Therefore, we recommend using this fortification concentration, but future studies should be carried out to improve the oxidative stability of MSIO and the burgers.

Bioactive peptides derived from enzymatic hydrolysis are gaining attention for the production of supplements, pharmaceutical compounds, and functional foods. However, their inclusion in oral delivery systems is constrained by their high susceptibility to degradation during human gastrointestinal digestion. Encapsulating techniques can be used to stabilize functional ingredients, helping to maintain their activity after processing, storage, and digestion, thus improving their bioaccessibility. Monoaxial spray-drying and electrospraying are common and economical techniques used for the encapsulation of nutrients and bioactive compounds in both the pharmaceutical and food industries. Although less studied, the coaxial configuration of both techniques could potentially improve the stabilization of protein-based bioactives via the formation of shell–core structures. This article reviews the application of these techniques, both monoaxial and coaxial configurations, for the encapsulation of bioactive peptides and protein hydrolysates, focusing on the factors affecting the properties of the encapsulates, such as the formulation of the feed solution, selection of carrier and solvent, as well as the processing conditions used. Furthermore, this review covers the release, retention of bioactivity, and stability of peptide-loaded encapsulates after processing and digestion. [ABSTRACT FROM AUTHOR]

The encapsulation of the 3-deoxyanthocyanidins (3-DXA) red dye, extracted from sorghum (Sorghum bicolor L.) leaves, was explored for food application. The extracts showed antioxidant activity at concentrations ranging from 803 to 1210 μg mL−1 and did not reveal anti-inflammatory or cytotoxic properties, indicating their potential for food application. Encapsulation was performed with two carrier agents (maltodextrin and Arabic gum) in different proportions (1:1, 2:1 and 1.5:2.5 (w/w)). The microparticles produced by freeze-drying and spray-drying were studied according to the concentration of the dye, the encapsulation efficiency, the process yield, the solubility and the colour of the powders. The dye extracts are released from the microparticles at different pHs. The variation in ratio composition of the 3-DXA encapsulation was assessed by principal component analysis (PCA) using data from ten physicochemical parameters. The results indicated that the maltodextrin at the 2:1 ratio had a higher dye concentration and total phenolic content (TPC) at pH 6. This ratio was selected to produce the microparticles by freeze-drying and spray-drying, and the particles were used in the temperature stability tests at pH 6. The results suggest that the freeze-drying process offers better protection to 3-DXA, with a degradation percentage of 22% during the heating period (80 °C for 18 h), compared to the non-encapsulated dye (48%). However, there were no significant differences between the two polymeric agents. The non-encapsulated 3-DXA was evaluated as control and lost 48% of the total colour with the same treatment. Red dyes from sorghum leaf by-products may constitute promising ingredients for the food industry and increase the value of this crop. [ABSTRACT FROM AUTHOR]

The aim of this work is to develop different encapsulated propolis ingredients by spray-drying and to evaluate their bioaccessibility using simulated in vitro digestion. To achieve these goals, first, microparticles of a propolis extract with inulin as the coating polymer were prepared under the optimal conditions previously determined. Then, a fraction of inulin was replaced with other encapsulating agents, namely sodium alginate, pectin, and chitosan, to obtain different ingredients with controlled release properties in the gastrointestinal tract. The analysis of the phenolic profile in the propolis extract and microparticles showed 58 compounds tentatively identified, belonging mainly to phenolic acid derivatives and flavonoids. Then, the behavior of the free extract and the formulated microparticles under gastrointestinal conditions was studied through an in vitro gastrointestinal digestion process using the INFOGEST protocol. Digestion of the free extract resulted in the degradation of most compounds, which was minimized in the encapsulated formulations. Thus, all developed microparticles could be promising strategies for improving the stability of this bioactive extract under gastrointestinal conditions, thereby enhancing its beneficial effect.

Background: Wine antioxidants are linked to cardiovascular disease prevention, thus are highly valued by the healthy food market. The dehydration process removes alcohol and water from wine and allows it to extend its shelf life, while encapsulation can help preserve physical-chemical and antioxidant properties. Moreover, information on the effect of wine drying and encapsulation on non-anthocyanin phenolic compounds is limited in the literature. Methods: Listan Prieto and Syrah (Vitis vinifera L.) wines were dehydrated and converted into powder by freezing and spray drying. Powdered wines were subjected to water activity, pH, soluble solids, color, and phenolic compounds analysis. Results: Freeze-drying process produced powdered wines with higher pH than the spray-drying process. Powdered wines made by these processes presented similar water activity and soluble solids. Powdered wines did not show statistical differences in trans-resveratrol, hydrocinnamic acids, phloretin, kaempferol, and quercetin content according to their dehydration process. In addition, powdered wines significantly concentrated hydrocinnamic acid and quercetin when compared to non-dealcoholized and dealcoholized wine samples. Conclusions: The results suggest that the dehydration process does not negatively modify the characteristics of the wine, and it retains a significant concentration of phenolic compounds. Therefore, powdered wines have an interesting potential to be used as a natural source of antioxidants for food supplementation. [ABSTRACT FROM AUTHOR]

Propolis is a well-known natural antibacterial substance with various biological activities, such as anti-inflammatory and antioxidant activity. However, applications of propolis are limited due to its low water solubility. In this study, propolis microcapsules were developed with a core material of ethanol extract of propolis and shell materials of gum arabic and β-cyclodextrin using a spray-drying technique. The optional processing formula, particle size distribution, morphology, dissolution property, and antibacterial activity of propolis microcapsules were determined. The results showed that the optional processing obtained an embedding rate of 90.99% propolis microcapsules with an average particle size of 445.66 ± 16.96 nm. The infrared spectrogram and thermogravimetric analyses showed that propolis was embedded in the shell materials. The propolis microcapsules were continuously released in water and fully released on the eighth day, and compared to propolis, the microcapsules exhibited weaker antibacterial activity. The minimum inhibitory concentrations (MICs) of propolis microcapsules against Escherichia coli and Staphylococcus aureus were 0.15 and 1.25 mg/mL, and their minimum bactericidal concentrations (MBCs) were 0.3 and 1.25 mg/mL, respectively. This water-soluble propolis microcapsule shows the potential for use as a sustained-release food additive, preservative, or drug.

Ethyl cellulose (EC)-based microparticles, with and without the incorporation of polyethylene glycol (PEG) as a second encapsulating agent, were prepared using the spray-drying process for the encapsulation of retinoic acid (RA). The production of a suitable controlled delivery system for this retinoid will promote its antitumor efficiency against acute promyelocytic leukemia (APL) due to the possibility of increasing the bioavailability of RA. Product yield ranged from 12 to 28% in all the microparticle formulations, including unloaded microparticles and RA-loaded microparticles. Microparticles with a mean diameter between 0.090 ± 0.002 and 0.54 ± 0.02 µm (number size distribution) and with an irregular form and rough surface were obtained. Furthermore, regarding RA-loaded microparticles, both polymer-based formulations exhibited an encapsulation efficiency of around 100%. A rapid and complete RA release was reached in 40 min from EC− and EC + PEG-based microparticles. [ABSTRACT FROM AUTHOR]

The study compares the impact of freeze- and spray-drying (FD, SD) microencapsulation methods on the content of β-glucan, total polyphenols (TP), total flavonoids (TF), phenolic acids (PA), and antioxidant activity (AA) in commercially β-glucan powder (Pleurotus ostreatus) using maltodextrin as a carrier. Morphology (scanning electron microscopy- SEM), yield, moisture content (MC), and water activity (aw) were also evaluated in the samples. Our examinations revealed significant structural differences between powders microencapsulated by the drying methods. As compared to non-encapsulated powder, the SD powder with yield of 44.38 ± 0.55% exhibited more reduced (p < 0.05) values for aw (0.456 ± 0.001) and MC (8.90 ± 0.44%) than the FD one (yield: 27.97 ± 0.33%; aw: 0.506 ± 0.002; MC: 11.30 ± 0.28%). In addition, the highest values for β-glucan content (72.39 ± 0.38%), TPC (3.40 ± 0.17 mg GAE/g), and TFC (3.07 ± 0.29 mg QE/g) have been detected in the SD powder. Our results allow for the conclusion that the SD microencapsulation method using maltodextrin seems to be more powerful in terms of the β-glucan powder yield and its contents of β-glucan, TP, and TF as compared to the FD technique. [ABSTRACT FROM AUTHOR]

Bioactive peptides derived from enzymatic hydrolysis are gaining attention for the production of supplements, pharmaceutical compounds, and functional foods. However, their inclusion in oral delivery systems is constrained by their high susceptibility to degradation during human gastrointestinal digestion. Encapsulating techniques can be used to stabilize functional ingredients, helping to maintain their activity after processing, storage, and digestion, thus improving their bioaccessibility. Monoaxial spray-drying and electrospraying are common and economical techniques used for the encapsulation of nutrients and bioactive compounds in both the pharmaceutical and food industries. Although less studied, the coaxial configuration of both techniques could potentially improve the stabilization of protein-based bioactives via the formation of shell–core structures. This article reviews the application of these techniques, both monoaxial and coaxial configurations, for the encapsulation of bioactive peptides and protein hydrolysates, focusing on the factors affecting the properties of the encapsulates, such as the formulation of the feed solution, selection of carrier and solvent, as well as the processing conditions used. Furthermore, this review covers the release, retention of bioactivity, and stability of peptide-loaded encapsulates after processing and digestion.

The encapsulation of the 3-deoxyanthocyanidins (3-DXA) red dye, extracted from sorghum (Sorghum bicolor L.) leaves, was explored for food application. The extracts showed antioxidant activity at concentrations ranging from 803 to 1210 μg mL−1 and did not reveal anti-inflammatory or cytotoxic properties, indicating their potential for food application. Encapsulation was performed with two carrier agents (maltodextrin and Arabic gum) in different proportions (1:1, 2:1 and 1.5:2.5 (w/w)). The microparticles produced by freeze-drying and spray-drying were studied according to the concentration of the dye, the encapsulation efficiency, the process yield, the solubility and the colour of the powders. The dye extracts are released from the microparticles at different pHs. The variation in ratio composition of the 3-DXA encapsulation was assessed by principal component analysis (PCA) using data from ten physicochemical parameters. The results indicated that the maltodextrin at the 2:1 ratio had a higher dye concentration and total phenolic content (TPC) at pH 6. This ratio was selected to produce the microparticles by freeze-drying and spray-drying, and the particles were used in the temperature stability tests at pH 6. The results suggest that the freeze-drying process offers better protection to 3-DXA, with a degradation percentage of 22% during the heating period (80 °C for 18 h), compared to the non-encapsulated dye (48%). However, there were no significant differences between the two polymeric agents. The non-encapsulated 3-DXA was evaluated as control and lost 48% of the total colour with the same treatment. Red dyes from sorghum leaf by-products may constitute promising ingredients for the food industry and increase the value of this crop.

Consumer knowledge about pasta quality differs around the world. Modern consumers are more sophisticated compared to past times, due to the availability of information on pasta types and quality. Therefore, this study investigated the nutritional, physical, textural, and morphological quality of durum wheat pasta enriched with carrot waste encapsulates (10 and 20% freeze-dried encapsulate (FDE) and 10 and 20% spray-dried encapsulate (SDE)), as well as determining consumer preferences for this type of product. Replacement of semolina with FDE and SDE contributed to changes in the pasta nutritional quality, which was reflected in the increased protein, fat, and ash content. Additionally, changes in cooking quality, color, and texture were within satisfactory limits. The uncooked pasta enriched with 10 and 20% SDE was characterized by a lighter yellow intensity with color saturation, as well as an imperceptible waxy appearance compared to the control and enriched pasta with 10 and 20% FDE. After cooking, the yellow color was more intense in all the enriched pasta samples which can be linked to the raw cereal which was significantly greater in the control in comparison to the FDE and SDE containing samples. Overall, carrot waste can be a promising material for the food industry to produce high-quality pasta. [ABSTRACT FROM AUTHOR]

Background: Wine antioxidants are linked to cardiovascular disease prevention, thus are highly valued by the healthy food market. The dehydration process removes alcohol and water from wine and allows it to extend its shelf life, while encapsulation can help preserve physical-chemical and antioxidant properties. Moreover, information on the effect of wine drying and encapsulation on non-anthocyanin phenolic compounds is limited in the literature. Methods: Listan Prieto and Syrah (Vitis vinifera L.) wines were dehydrated and converted into powder by freezing and spray drying. Powdered wines were subjected to water activity, pH, soluble solids, color, and phenolic compounds analysis. Results: Freeze-drying process produced powdered wines with higher pH than the spray-drying process. Powdered wines made by these processes presented similar water activity and soluble solids. Powdered wines did not show statistical differences in trans-resveratrol, hydrocinnamic acids, phloretin, kaempferol, and quercetin content according to their dehydration process. In addition, powdered wines significantly concentrated hydrocinnamic acid and quercetin when compared to non-dealcoholized and dealcoholized wine samples. Conclusions: The results suggest that the dehydration process does not negatively modify the characteristics of the wine, and it retains a significant concentration of phenolic compounds. Therefore, powdered wines have an interesting potential to be used as a natural source of antioxidants for food supplementation.

Ethyl cellulose (EC)-based microparticles, with and without the incorporation of polyethylene glycol (PEG) as a second encapsulating agent, were prepared using the spray-drying process for the encapsulation of retinoic acid (RA). The production of a suitable controlled delivery system for this retinoid will promote its antitumor efficiency against acute promyelocytic leukemia (APL) due to the possibility of increasing the bioavailability of RA. Product yield ranged from 12 to 28% in all the microparticle formulations, including unloaded microparticles and RA-loaded microparticles. Microparticles with a mean diameter between 0.090 ± 0.002 and 0.54 ± 0.02 µm (number size distribution) and with an irregular form and rough surface were obtained. Furthermore, regarding RA-loaded microparticles, both polymer-based formulations exhibited an encapsulation efficiency of around 100%. A rapid and complete RA release was reached in 40 min from EC− and EC + PEG-based microparticles.

The study compares the impact of freeze- and spray-drying (FD, SD) microencapsulation methods on the content of β-glucan, total polyphenols (TP), total flavonoids (TF), phenolic acids (PA), and antioxidant activity (AA) in commercially β-glucan powder (Pleurotus ostreatus) using maltodextrin as a carrier. Morphology (scanning electron microscopy- SEM), yield, moisture content (MC), and water activity (aw) were also evaluated in the samples. Our examinations revealed significant structural differences between powders microencapsulated by the drying methods. As compared to non-encapsulated powder, the SD powder with yield of 44.38 ± 0.55% exhibited more reduced (p < 0.05) values for aw (0.456 ± 0.001) and MC (8.90 ± 0.44%) than the FD one (yield: 27.97 ± 0.33%; aw: 0.506 ± 0.002; MC: 11.30 ± 0.28%). In addition, the highest values for β-glucan content (72.39 ± 0.38%), TPC (3.40 ± 0.17 mg GAE/g), and TFC (3.07 ± 0.29 mg QE/g) have been detected in the SD powder. Our results allow for the conclusion that the SD microencapsulation method using maltodextrin seems to be more powerful in terms of the β-glucan powder yield and its contents of β-glucan, TP, and TF as compared to the FD technique.

Consumer knowledge about pasta quality differs around the world. Modern consumers are more sophisticated compared to past times, due to the availability of information on pasta types and quality. Therefore, this study investigated the nutritional, physical, textural, and morphological quality of durum wheat pasta enriched with carrot waste encapsulates (10 and 20% freeze-dried encapsulate (FDE) and 10 and 20% spray-dried encapsulate (SDE)), as well as determining consumer preferences for this type of product. Replacement of semolina with FDE and SDE contributed to changes in the pasta nutritional quality, which was reflected in the increased protein, fat, and ash content. Additionally, changes in cooking quality, color, and texture were within satisfactory limits. The uncooked pasta enriched with 10 and 20% SDE was characterized by a lighter yellow intensity with color saturation, as well as an imperceptible waxy appearance compared to the control and enriched pasta with 10 and 20% FDE. After cooking, the yellow color was more intense in all the enriched pasta samples which can be linked to the raw cereal which was significantly greater in the control in comparison to the FDE and SDE containing samples. Overall, carrot waste can be a promising material for the food industry to produce high-quality pasta.

Different proteases can be applied to produce certain bioactive peptides. This study focused on the effects of some commercial proteases and drying processes on the physical, chemical, and biological properties of chicken breast hydrolysates (CBH). Chicken breast hydrolyzed with Alcalase® presented a higher degree of hydrolysis (DH) than papain. Moreover, the treatment with Alcalase®, followed by papain (A-P), was more proficient in producing antioxidant activities than a single enzyme treatment. Conditions comprising 0.63% Alcalase® (w/w) at pH 8.0 and 52.5 °C for 3 h, followed by 0.13% papain (w/w) at pH 6.0 and 37 °C for 3 h, resulted in the highest yields of DH and peptide contents. The spray-dried microencapsulated powder improved the physicochemical properties including moisture content, color measurement, solubility, and particle morphology. In summary, the dual enzyme application involving the hydrolysis of Alcalase® and papain, coupled with the spray-drying process, could be used to produced antioxidant CBH.

The thermal stability of four different commercial citrus peel extracts was tested and improved by an encapsulation process with β-cyclodextrins in a spray-dryer. All extracts after the encapsulation process maintained a good antioxidant capacity, with an apparent loss in total phenolic compounds of around 20–25%. In addition, all samples showed good antimicrobial activity (MIC 5–0.625 mg/mL) against Staphylococcus aureus, which was maintained after the encapsulation process (MIC 5–1.25 mg/mL). Based on the antioxidant and antimicrobial activity results, the best-encapsulated citrus extract was selected for incorporation into a polylactic acid/polyhydroxy butyrate (PLA/PHB) film. The latter was then produced on an industrial scale by cast extrusion and was found to be suitable for food contact as it showed overall migration values in different food simulants lower than the legislative limit of 10 mg of non-volatile substances per 1 dm2 of surface area. The UHPLC-HRMS analysis, performed to evaluate the migration of the active compounds, revealed about 13.41% release in food simulant A and 11.02% in food simulant B. Antimicrobial analysis conducted directly on the film showed a growth inhibition activity towards Escherichia coli and Staphylococcus aureus equal to 30 and 60%, respectively.

Spray-drying and freeze-drying can extend the shelf life and improve the transportability of high-nutritional foods such as Liluva (processing water of legumes). Nonetheless, the effects of these processes on nutrition, physiochemical properties, and sensory quality are unknown. In this study, particle sizes, protein profiles, colour, and preliminary sensory profile of pea powder samples were determined by Mastersizer 3000, protein gels, chroma meter, and 9-point hedonic scale, respectively. Results indicated that no significant difference was found in the molecular weight distribution of protein bands in pea water and sensory profile after drying. Fibre content in pea water after spray-drying was higher while soluble carbohydrates and minerals were lower than those after freeze-drying. Spray-drying decreased pea water’s lysine content, particle size, redness colour, and yellowness colour, while it increased its light colour; however, freeze-drying showed the opposite results. Overall, spray-drying could be a better drying technology that can be applied to dry pea water. Further experiments are required, however, to determine the influence of drying technologies on emulsifying activity.

The utilization of astaxanthin in food processing is considered to be narrow because of its substandard solubility in aqueous matrices and the instability of chemical compounds during the processing of food and the instability of chemical compounds during the processing of food. The investigation sought to evaluate multilayer emulsions stabilized by ionic interfacial layers of lupin protein isolate (LPI), ι-carrageenan (CA), and chitosan (CHI) on the physical stability of the emulsion as well as the retention of astaxanthin during the spray drying process. Primary emulsion (Pr-E) was prepared by adding LPI on oil droplet surfaces containing astaxanthin. The homogenization pressure and cycles to obtain the Pr-E were investigated. The secondary emulsion (Se-E) and tertiary emulsion (Te-E) were elaborated by mixing CA/Pr-E and CHI/Se-E, respectively. Emulsion stability was assessed under different environmental stresses (pH and NaCl). Astaxanthin retention of emulsions was determined immediately after finishing the spray-drying process. The results showed that Pr-E was stabilized with 1.0% (w/v) of LPI at 50 MPa and three cycles. Se-E and Te-E were obtained with CA/Pr-E and Se-E/CHI of 70/30 and 50/50% (w/w), respectively. The Se-E was the most stable compared to the Pr-E and Te-E when subjected to different pHs; nevertheless, once the NaCl concentration rose, no variations in the ζ-potential of all emulsions studied or destabilization were observed. The Se-E and Te-E derived provided higher astaxanthin retention (>95%) during the spray-drying process compared to Pr-E (around 88%). The results indicated that these astaxanthin multilayer emulsions show considerable potential as a functional ingredient in food products.

Polyphenolic extracts from pine bark have reported different biological actions and promising beneficial effects on human health. However, its susceptibility to environmental stresses (temperature, storage, etc.) and physiological human conditions prequires the development of efficient protection mechanisms to allow effective delivering of functionality. The aim of this work was to encapsulate pine bark extract rich phenolic compounds by spray-drying using maltodextrin, and understand the influence of encapsulation on the antioxidant and antimicrobial activity and bioaccessibility of phenolic compounds during gastrointestinal digestion. The optimized process conditions allowed good encapsulation efficiency of antioxidant phenolic compounds. The microencapsulation was effective in protecting those compounds during gastrointestinal conditions, controlling their delivery and enhancing its health benefits, decreasing the production of reactive oxygen species implicated in the process of oxidative stress associated with some pathologies. Finally, this encapsulation system was able to protect these extracts against acidic matrices, making the system suitable for the nutritional enrichment of fermented foods or fruit-based beverages, providing them antimicrobial protection, because the encapsulated extract was effective against Listeria innocua. Overall, the designed system allowed protecting and appropriately delivering the active compounds, and may find potential application as a natural preservative and/or antioxidant in food formulations or as bioactive ingredient with controlled delivery in pharmaceuticals or nutraceuticals.

Microencapsulation of fermented noni juice (FNJ) into powder format could protect bioactive compounds, reduce the unpleasant odour and improve the acceptability for consumers. Blends of maltodextrin (MD) and gum acacia (GA) were used to achieve spray-drying microencapsulation of noni juice at different blending ratios. The physicochemical properties including microstructure, moisture content, water activity, particle size, bulk/tapped density, dissolution rate, ATR-FTIR and the bioaccessibility of bioactive compounds in powders during in vitro digestion were examined. Results showed that blends produced with more GA produced microcapsules with lower moisture content, water activity and bulk/tapped density, but slower powder dissolution. The ATR-FTIR results suggested that there were no significant chemical interactions between the core material and carrier or between the MD and GA in the blend powders. The spray-dried noni juice powder produced using the blends with higher ratio of GA to MD showed a better protection on the bioactive compounds, resulting in a higher bioaccessibility of powders during in vitro digestion. This study provides insights into microencapsulation of noni juice using blends of MD and GA and examines the physicochemical properties and bioaccessibilities of spray-dried powders as affected by the selected carriers.

Vanilla is one of the most popular species in the world. Its main compound, vanillin, is responsible for its characteristic aroma and flavor and its antioxidant and biological properties. Vanillin is very unstable in the presence of oxygen, light, and humidity, which complicates its use and preservation. Therefore, to solve this problem, this study aimed to develop vanilla oleoresin microcapsules. Vanilla oleoresin was obtained with supercritical carbon dioxide and microencapsulated by complex coacervation and subsequent spray drying (100 °C/60 °C inlet/outlet temperature). The optimal conditions for the complex coacervation process were 0.34% chitosan, 1.7% gum Arabic, 5.29 pH, and an oleoresin:wall material ratio of 1:2.5. Fourier Transform Infrared Spectroscopy (FT-IR) analysis of the coacervates before and after spray drying revealed the presence of the functional group C=N (associated with carbonyl groups of vanillin and amino groups of chitosan), indicating that microencapsulation by complex coacervation-spray drying was successful. The retention and encapsulation efficiencies were 84.89 ± 1.94% and 69.20 ± 1.79%. The microcapsules obtained from vanilla oleoresin had high vanillin concentration and the presence of other volatile compounds and essential fatty acids. All this improves the aroma and flavor of the product, increasing its consumption and application in various food matrices.

The influence of the carbohydrate-based wall matrix (glucose syrup, GS, and maltodextrin, MD21) and the storage temperature (4 °C or 25 °C) on the oxidative stability of microencapsulated fish oil was studied. The microcapsules (ca. 13 wt% oil load) were produced by spray-drying emulsions stabilized with whey protein hydrolysate (WPH), achieving high encapsulation efficiencies (>97%). Both encapsulating materials showed an increase in the oxidation rate with the storage temperature. The GS-based microcapsules presented the highest oxidative stability regardless of the storage temperature with a peroxide value (PV) of 3.49 ± 0.25 meq O2/kg oil and a content of 1-penten-3-ol of 48.06 ± 9.57 ng/g oil after six weeks of storage at 4 °C. Moreover, low-fat mayonnaise enriched with GS-based microcapsules loaded with fish oil and containing WPH as a film-forming material (M-GS) presented higher oxidative stability after one month of storage when compared to low-fat mayonnaise enriched with either a 5 wt% fish oil-in-water emulsion stabilized with WPH or neat fish oil. This was attributed to a higher protective effect of the carbohydrate wall once the microcapsules were incorporated into the mayonnaise matrix.

Aqueous and ethanolic extracts of Hibiscus sabdariffa were spray-dried using maltodextrin (MD) and gum arabic (GA) as carrier agents. A Taguchi L8 experimental design with seven variables was implemented. Physicochemical properties in the encapsulates were evaluated by Ultraviolet-Visible (UV-Vis,) X-ray Diffraction (XRD), spectroscopy and gravimetric techniques. Treatments with aqueous extracts showed the highest concentration of total soluble polyphenols (TSP) 32.12−21.23 mg equivalent gallic acid (EAG)/g dry weight (DW), and antioxidant capacity (AOX) in the 2,2-azinobis-3-ethylbenzotiazoline-6-sulfonic acid (ABTS) assay. The best treatment for TSP and AOX was T4: 2.5% Hibiscus w/w, aqueous extract, decoction, extract-to-carrier ratio 1:1 (w/w), proportion to carriers (MD:GA) 80:20 (w/w), 10,000 rpm, 150 °C. The Taguchi L8 design is a tool that allows the use of multiple variables with a low number of treatments that indicate the drying conditions that give the best parameters, focusing mainly on TSP and AOX, also, it is a good alternative for the preservation and stability of the phenolic compoudns in Hibiscus.

Effects of agave fructans as carrier agents on the encapsulation of blue corn anthocyanins using spray-drying were evaluated. Blue corn extract was mixed with 6%, 8%, 10%, and 12% (w/v) of agave fructans in duplicate and dried at 150 °C. The extract showed good contents of anthocyanins, polyphenols, and antioxidant activity. The increase of agave fructans in the encapsulated powders caused a significant increase (p < 0.05) in the humidity, water activity (aw), pH, bulk density, water solubility index (WSI), and color L* values. On the contrary, the agave fructan addition decreased the hygroscopicity, water absorption index (WAI), antioxidant activity, total anthocyanin, total polyphenol, and individual anthocyanin contents. The encapsulation of blue corn extract with 6% agave fructans (w/v) resulted in good physical, thermal, morphological, and high antioxidant properties. The results suggest that the use of agave fructans as wall material represents advantages in the conservation of anthocyanins and other bioactive compounds from blue corn extract during their encapsulation. The application of blue corn anthocyanin encapsulated powders as a food ingredient is promising for food pigmentation, representing additional advantages for their contribution as a soluble fiber that can benefit the health of consumers.

The thermal stability of four different commercial citrus peel extracts was tested and improved by an encapsulation process with β-cyclodextrins in a spray-dryer. All extracts after the encapsulation process maintained a good antioxidant capacity, with an apparent loss in total phenolic compounds of around 20–25%. In addition, all samples showed good antimicrobial activity (MIC 5–0.625 mg/mL) against Staphylococcus aureus, which was maintained after the encapsulation process (MIC 5–1.25 mg/mL). Based on the antioxidant and antimicrobial activity results, the best-encapsulated citrus extract was selected for incorporation into a polylactic acid/polyhydroxy butyrate (PLA/PHB) film. The latter was then produced on an industrial scale by cast extrusion and was found to be suitable for food contact as it showed overall migration values in different food simulants lower than the legislative limit of 10 mg of non-volatile substances per 1 dm2 of surface area. The UHPLC-HRMS analysis, performed to evaluate the migration of the active compounds, revealed about 13.41% release in food simulant A and 11.02% in food simulant B. Antimicrobial analysis conducted directly on the film showed a growth inhibition activity towards Escherichia coli and Staphylococcus aureus equal to 30 and 60%, respectively. [ABSTRACT FROM AUTHOR]

Different proteases can be applied to produce certain bioactive peptides. This study focused on the effects of some commercial proteases and drying processes on the physical, chemical, and biological properties of chicken breast hydrolysates (CBH). Chicken breast hydrolyzed with Alcalase® presented a higher degree of hydrolysis (DH) than papain. Moreover, the treatment with Alcalase®, followed by papain (A-P), was more proficient in producing antioxidant activities than a single enzyme treatment. Conditions comprising 0.63% Alcalase® (w/w) at pH 8.0 and 52.5 °C for 3 h, followed by 0.13% papain (w/w) at pH 6.0 and 37 °C for 3 h, resulted in the highest yields of DH and peptide contents. The spray-dried microencapsulated powder improved the physicochemical properties including moisture content, color measurement, solubility, and particle morphology. In summary, the dual enzyme application involving the hydrolysis of Alcalase® and papain, coupled with the spray-drying process, could be used to produced antioxidant CBH. [ABSTRACT FROM AUTHOR]

Spray-drying and freeze-drying can extend the shelf life and improve the transportability of high-nutritional foods such as Liluva (processing water of legumes). Nonetheless, the effects of these processes on nutrition, physiochemical properties, and sensory quality are unknown. In this study, particle sizes, protein profiles, colour, and preliminary sensory profile of pea powder samples were determined by Mastersizer 3000, protein gels, chroma meter, and 9-point hedonic scale, respectively. Results indicated that no significant difference was found in the molecular weight distribution of protein bands in pea water and sensory profile after drying. Fibre content in pea water after spray-drying was higher while soluble carbohydrates and minerals were lower than those after freeze-drying. Spray-drying decreased pea water's lysine content, particle size, redness colour, and yellowness colour, while it increased its light colour; however, freeze-drying showed the opposite results. Overall, spray-drying could be a better drying technology that can be applied to dry pea water. Further experiments are required, however, to determine the influence of drying technologies on emulsifying activity. [ABSTRACT FROM AUTHOR]

Polyphenolic extracts from pine bark have reported different biological actions and promising beneficial effects on human health. However, its susceptibility to environmental stresses (temperature, storage, etc.) and physiological human conditions prequires the development of efficient protection mechanisms to allow effective delivering of functionality. The aim of this work was to encapsulate pine bark extract rich phenolic compounds by spray-drying using maltodextrin, and understand the influence of encapsulation on the antioxidant and antimicrobial activity and bioaccessibility of phenolic compounds during gastrointestinal digestion. The optimized process conditions allowed good encapsulation efficiency of antioxidant phenolic compounds. The microencapsulation was effective in protecting those compounds during gastrointestinal conditions, controlling their delivery and enhancing its health benefits, decreasing the production of reactive oxygen species implicated in the process of oxidative stress associated with some pathologies. Finally, this encapsulation system was able to protect these extracts against acidic matrices, making the system suitable for the nutritional enrichment of fermented foods or fruit-based beverages, providing them antimicrobial protection, because the encapsulated extract was effective against Listeria innocua. Overall, the designed system allowed protecting and appropriately delivering the active compounds, and may find potential application as a natural preservative and/or antioxidant in food formulations or as bioactive ingredient with controlled delivery in pharmaceuticals or nutraceuticals. [ABSTRACT FROM AUTHOR]

The utilization of astaxanthin in food processing is considered to be narrow because of its substandard solubility in aqueous matrices and the instability of chemical compounds during the processing of food and the instability of chemical compounds during the processing of food. The investigation sought to evaluate multilayer emulsions stabilized by ionic interfacial layers of lupin protein isolate (LPI), ι-carrageenan (CA), and chitosan (CHI) on the physical stability of the emulsion as well as the retention of astaxanthin during the spray drying process. Primary emulsion (Pr-E) was prepared by adding LPI on oil droplet surfaces containing astaxanthin. The homogenization pressure and cycles to obtain the Pr-E were investigated. The secondary emulsion (Se-E) and tertiary emulsion (Te-E) were elaborated by mixing CA/Pr-E and CHI/Se-E, respectively. Emulsion stability was assessed under different environmental stresses (pH and NaCl). Astaxanthin retention of emulsions was determined immediately after finishing the spray-drying process. The results showed that Pr-E was stabilized with 1.0% (w/v) of LPI at 50 MPa and three cycles. Se-E and Te-E were obtained with CA/Pr-E and Se-E/CHI of 70/30 and 50/50% (w/w), respectively. The Se-E was the most stable compared to the Pr-E and Te-E when subjected to different pHs; nevertheless, once the NaCl concentration rose, no variations in the ζ-potential of all emulsions studied or destabilization were observed. The Se-E and Te-E derived provided higher astaxanthin retention (>95%) during the spray-drying process compared to Pr-E (around 88%). The results indicated that these astaxanthin multilayer emulsions show considerable potential as a functional ingredient in food products. [ABSTRACT FROM AUTHOR]

Vanilla is one of the most popular species in the world. Its main compound, vanillin, is responsible for its characteristic aroma and flavor and its antioxidant and biological properties. Vanillin is very unstable in the presence of oxygen, light, and humidity, which complicates its use and preservation. Therefore, to solve this problem, this study aimed to develop vanilla oleoresin microcapsules. Vanilla oleoresin was obtained with supercritical carbon dioxide and microencapsulated by complex coacervation and subsequent spray drying (100 °C/60 °C inlet/outlet temperature). The optimal conditions for the complex coacervation process were 0.34% chitosan, 1.7% gum Arabic, 5.29 pH, and an oleoresin:wall material ratio of 1:2.5. Fourier Transform Infrared Spectroscopy (FT-IR) analysis of the coacervates before and after spray drying revealed the presence of the functional group C=N (associated with carbonyl groups of vanillin and amino groups of chitosan), indicating that microencapsulation by complex coacervation-spray drying was successful. The retention and encapsulation efficiencies were 84.89 ± 1.94% and 69.20 ± 1.79%. The microcapsules obtained from vanilla oleoresin had high vanillin concentration and the presence of other volatile compounds and essential fatty acids. All this improves the aroma and flavor of the product, increasing its consumption and application in various food matrices. [ABSTRACT FROM AUTHOR]