Search

The present study aimed to develop extruded corn breakfast cereal enriched with whole peach palm flour. A 22 central composite rotatable design was used, and the cereal was processed in a ZKS-30 co-rotational twin-screw extruder (Werner and Pfleiderer), followed by its physicochemical, technological and microbiological characterization. The technological analysis revealed higher expansion and lower hardness as well as adequate lightness and water-absorption and water-solubility indices of the breakfast cereal at low moisture and intermediate peach palm flour contents. Moreover, 3.84% moisture, 0.63% ash, 6.09% protein, 0.39% lipids, 85.94% carbohydrates, 3.11% fiber and 246 RE of total carotenoids were found in the physicochemical analysis, and the microbiological parameters were in accordance with the Brazilian legislation (Resolution RDC 12/01). These results show that extruded corn breakfast cereal partially substituted with peach palm flour is an alternative product with good characteristics and market potential. The most recommended operational conditions to obtain products with good technological characteristics were a peach palm flour concentration of 25% and feed moisture of 16.2%. © 2020, Sociedade Brasileira de Ciencia e Tecnologia de Alimentos, SBCTA. All rights reserved.

The use of different protein sources in cereal products does not only aim to enrich them with proteins, but also to improve their protein quality, especially concerning the lysine content, the limiting amino acid in wheat flour. As an alternative to enrichment, protein isolates become viable because they provide protein content and quality. However, that the addition of protein sources to wheat flour greatly affects its rheological properties. Thus, the objective of this study was to evaluate the empirical rheology of wheat flour doughs substituted by pea (PPI), soybean (SPI), and whey (WPI) protein isolates, comparing the behavior of these three sources in order to predict the best application. Of all the isolates, PPI seems to have interfered less in the rheological profile of pure flour. WPI caused major changes, while SPI remained intermediate, but closer to PPI. Concentrations of PPI and SPI up to 10% and WPI up to 5% did not greatly modify the viscoelastic profile of the dough, which would allow the use of these mixtures in the production of breads, while higher concentrations would be more suitable for the manufacture of molded biscuits, in which the formation of a protein network is not necessary.

The aim of this study was to obtain an optimized gluten-free cookie formulation using alternative flours. For this, a 22 central composite rotatable design (CCRD), with varying concentrations of millet flour (MF) and chia seeds (CS), on a base of buckwheat flour (BF), was used. Control cookies were elaborated with 100% wheat flour (WF). The cookies were characterized for texture and other physical tests and by scanning electron microscopy of their internal structure. The response surfaces for the quality parameters of the cookies showed that the higher the proportion of MF used in the formulations, the lower the height and the greater the diameter, expansion factor, and hardness of the cookies. The addition of up to 10% CS showed no influence on the responses. The optimum point was defined as that with diameter, expansion factor, thickness, and hardness closer to the control cookie: 7.5% CS, 40% MF, and 52.5% BF. The substitution of wheat flour by buckwheat flour, millet flour, and chia seeds can be considered a suitable alternative for the preparation of gluten-free cookies.

The aim of this study was to develop fettuccini type rice fresh pasta by cold extrusion. To produce the pasta, a 2² Central Composite Rotational Design was used, in which the effects of the addition of pre-gelatinized rice flour - PGRF (0-60%) and modified egg albumin - MEA (0-10%) were studied. The dependent variables were the results of the cooking test and of the instrumental texture. The optimum cooking time for all of the formulations of rice fresh pasta was 3 minutes. MEA had a greater effect on increasing the weight of the pasta when compared to that of PGRF. It was found that with the addition of PGRF increase in loss of solids in cooking water, whereas MEA exerted the opposite effect on this parameter. Moreover, the maximum value of MEA (10%) had an optimum effect on pasta firmness, while PGRF had a negative effect on this parameter. The maximum values of PGRF and MEA reduced the stickiness of the pasta. Based on these results and on the parameters considered as most important, the rice pasta with the best technological characteristics was that with the maximum levels of MEA (10%) and no addition of PGRF (0%). This product was submitted to sensory and microbiological analyses, with good results.

The aim of this study was to verify the influence of the addition of the enzyme xylanase (four concentrations: 0, 4, 8, and 12 g.100 kg-1 flour) on the characteristics of loaf bread made with white wheat flour or whole grain wheat flour. Breads made from white flour and added with xylanase had higher specific volumes than those of the control sample (no enzyme); however, the specific volume did not differ significantly (p < 0.05) among the breads with different enzyme concentrations. All formulations made from whole grain wheat flour and added with xylanase also had specific volumes significantly higher than those of the control sample, and the highest value was found for the 8 g xylanase.100 kg-1 flour formulation. With respect to moisture content, the formulations with different enzyme concentrations showed small significant differences when compared to the control samples. In general, breads made with the addition of 8 g enzyme.100 kg-1 flour had the lowest firmness values, thus presenting the best technological characteristics.O objetivo deste estudo foi verificar a influência da adição da enzima xilanase (quatro concentrações: 0, 4, 8 e 12 g.100 kg-1 de farinha) nas características de pães de forma obtidos com farinha de trigo comum ou farinha de trigo de grão inteiro. Os pães produzidos com farinha comum com adição de xilanase apresentaram maior volume específico que o controle (sem enzima), porém não diferiram significativamente (p < 0,05) dos pães com as diferentes concentrações da enzima. Todas as formulações com farinha de grão inteiro adicionadas de xilanase também apresentaram volume específico significativamente maior que o controle, sendo o maior valor encontrado na formulação com 8 g xilanase.100 kg-1 de farinha. Quanto à umidade, as diferentes concentrações da enzima apresentaram pequena diferença significativa em relação ao controle. Em geral, os pães obtidos com adição de 8 g enzima.100 kg-1 de farinha apresentaram os menores valores de firmeza, apresentando as melhores características tecnológicas.

The aim of this study was to determine the influence of process parameters and Passion Fruit Fiber (PFF) addition on the Glycemic Index (GI) of an extruded breakfast cereal. A 2³ Central Composite Rotational Design (CCRD) was used, with the following independent variables: raw material moisture content (18-28%), 2nd and 3rd barrel zone temperatures (120-160 ºC), and PFF (0-30%). Raw materials (organic corn flour and organic PFF) were characterized as to their proximate composition, particle size, and in vitro GI. The extrudates were characterized as to their in vitro GI. The Response Surface Methodology (RSM) and Principal Component Analysis (PCA) were used to analyze the results. Corn flour and PFF presented 8.55 and 7.63% protein, 2.61 and 0.60% fat, 0.52 and 6.17% ash, 78.77 and 78.86% carbohydrates (3 and 64% total dietary fiber), respectively. The corn flour particle size distribution was homogeneous, while PFF presented a heterogeneous particle size distribution. Corn flour and PFF presented values of GI of 48 and 45, respectively. When using RSM, no effect of the variables was observed in the GI of the extrudates (average value of 48.41), but PCA showed that the GI tended to be lower when processing at lower temperatures (158 ºC). When compared to white bread, the extrudates showed a reduction of the GI of up to 50%, and could be considered an interesting alternative in weight and glycemia control diets. Este trabalho visou avaliar o Índice Glicêmico (IG) in vitro de cereal matinal extrudado à base de farinha de milho (MI) e farelo de maracujá (MA) orgânicos. As matérias-primas foram caracterizadas (composição centesimal, tamanho de partícula e IG) e foi utilizado um planejamento experimental completo 2³ para a obtenção dos extrudados, nos quais as variáveis independentes foram: teor de umidade da matéria-prima (18 a 28%), temperatura de extrusão (120 a 160 ºC) e adição de farelo de maracujá (0 a 30%), tendo o IG como resposta analisada pela Metodologia de Superfície de Resposta (MSR) e Análise de Componentes Principais (ACP). MI e MA apresentaram 8,5 e 7,63% de proteína, 2,61 e 0,60% de gordura, 0,52 e 6,17% de cinzas, 78,77 e 78,86% de carboidratos (3 e 64% de fibra alimentar total) e 48 e 45 de IG, respectivamente. MI teve distribuição homogênea de partículas; já a de MA foi heterogênea. A MSR não mostrou variação significativa no IG (média = 48,41), mas a ACP indicou que o IG tende a ser menor em extrudados com temperaturas de extrusão abaixo de 128 ºC, e maior acima de 158 ºC. O cereal matinal apresentou redução de até 50% no IG, quando comparado com pão branco (100%), podendo ser benéfico à saúde.

Este trabalho avaliou a influência da aplicação de coberturas comestíveis na aceitação sensorial e na intenção de compra de bolos de chocolate. Os tratamentos estudados foram: sem cobertura e sem embalagem; embalados em sacos de polipropileno; revestidos com coberturas à base de 10% de gelatina, 10% de gelatina com 10% de ácido esteárico, 10% de amido modificado, 18% de cera de carnaúba e fondant. Nos dias 1 e 3 de estocagem, os bolos com e sem coberturas foram avaliados quanto à aceitação da cor, aroma, sabor, textura e aceitação global, além da intenção de compra. Os bolos recobertos com fondant foram os mais bem aceitos nos atributos avaliados, apresentando elevada intenção de compra. Os bolos com as demais coberturas apresentaram uma aceitação similar aos bolos controle não recobertos, com e sem embalagem. No entanto, sua intenção de compra ficou abaixo do desejável. As coberturas eram perceptíveis sensorialmente e não conferiram características próximas às do fondant, provavelmente frustrando os provadores, que esperavam bolos com coberturas/recheios mais ricos. Apesar disto, todas as coberturas avaliadas apresentaram desempenho similar à embalagem na manutenção da textura dos bolos.This study evaluated the influence of the application of edible coatings in the sensory acceptance and purchase intention of chocolate cakes. The treatments studied were: without coating or packaging; packed in polyethylene bags; covered with coatings based on 10% gelatin, 10% gelatin with 10% stearic acid, 10% modified starch, 18% "carnaúba" wax, and fondant. On days 1 and 3 of storage, the cakes with and without coatings were evaluated in terms of color, aroma, flavor, texture and global acceptance, as well as purchase intention. The cakes covered with fondant presented the greatest acceptance for the attributes evaluated and a high purchase intention. The cakes with the other coatings presented a similar acceptance to the control cakes without coatings, with or without packaging. Nevertheless, their purchase intention was lower than desirable. The coatings were sensorially perceptible and did not confer characteristics similar to fondant, probably frustrating the panelists, who expected cakes with richer icings/fillings. Notwithstanding, all coatings evaluated presented performance similar to that of those packed in plastic film when the cake texture was considered.

In this work, the effects of thermoplastic extrusion process parameters (raw material moisture content and temperature) and the addition of functional ingredients (lycopene and soy protein) on quality characteristics of a base-formulation for extruded corn snacks were studied, with the objective of developing an easy-to-eat functional product. A single-screw Labor PQ 30 model Inbramaq extruder was used for extrusion and a central composite rotational design (CCRD) was followed. The independent variables were: i) percentage of soy protein isolate (0-30%); ii) percentage of lycopene preparation (0-0.1%); iii) raw material moisture content (20-30%); and iv) 5th zone temperature (100-150 °C). The expansion index reached maximum values with the lowest raw material moisture content (20%) and intermediate temperatures (approximately 125 °C). Instrumental hardness was higher with high moisture and low temperature; however, increasing the percentage of soy protein was beneficial for the texture of the product, reducing hardness. The red color intensity increased with the increase in lycopene content and moisture, and with the reduction of temperature. Sensory acceptance tests were carried out for two products, with maximum percentages of the functional ingredients, 20% moisture and temperatures of 125 and 137 °C, with greater acceptance for the product extruded at 125 °C.Neste trabalho, estudou-se a influência de parâmetros do processo de extrusão termoplástica (umidade da matéria-prima e temperatura) e da adição de ingredientes funcionais (licopeno e proteína de soja) sobre características de qualidade de uma formulação-base para snacks extrusados de milho, com o objetivo de desenvolver um alimento funcional de fácil consumo. Utilizou-se um extrusor monorrosca Inbramaq, modelo Labor PQ 30, e seguiu-se um planejamento experimental com as seguintes variáveis independentes: i) teor de isolado proteico de soja (0 a 30%); ii) teor de preparado de licopeno (0 a 0,1%); iii) umidade da matéria-prima (20 a 30%); e iv) temperatura do extrusor na zona 5 (100 a 150 °C). O índice de expansão atingiu valores máximos com o menor valor de umidade da matéria-prima (20%) e temperatura intermediária (aproximadamente 125 °C). A dureza instrumental foi mais elevada com umidade alta e temperatura baixa, entretanto, o aumento do teor de proteína de soja foi benéfico para a textura do produto final, reduzindo a dureza. A intensidade da coloração vermelha aumentou com o aumento do teor de licopeno e da umidade, e com a diminuição da temperatura. Foram realizados testes de aceitação sensorial para dois produtos, com os teores máximos dos ingredientes funcionais, 20% umidade e temperaturas de 125 e 137 °C, obtendo-se maior aceitação para o produto extrusado a 125 °C.

Coberturas comestíveis biodegradáveis são uma alternativa às embalagens sintéticas, que causam preocupações ambientais. Este trabalho avaliou o efeito de diferentes tipos de coberturas sobre propriedades físico-químicas de bolo de chocolate durante a estocagem, em comparação com bolo sem cobertura (CO) e bolo sem cobertura embalado em polipropileno (EMB). As seguintes coberturas foram aplicadas sobre os bolos: 10% gelatina (GE), 10% gelatina com 10% ácido esteárico (GE + AE), 18% cera de carnaúba (CE), 10% amido modificado (AM) e fondant (FO). Os bolos foram avaliados durante 10 dias de estocagem. FO e EMB apresentaram menor perda de massa, enquanto todos os demais tratamentos apresentaram valores superiores a CO. GE, GE + AE e EMB apresentaram a menor redução da atividade de água, enquanto CE e CO apresentaram a maior redução. As superfícies dos bolos recobertos estavam mais duras que as de CO e EMB. Os maiores valores para dureza e mastigabilidade foram encontrados para CE e CO e os menores, para EMB, GE e GE + AE. Em relação à cor, GE + AE foi diferente dos demais tratamentos, devido à presença do ácido esteárico. Os resultados indicam que a perda de massa dos bolos pode ser atribuída também à perda de água das coberturas.Biodegradable edible icing or frosting is an alternative to synthetic packaging that causes environmental concerns. This work evaluated the effect of different types of frosting on the physical-chemical properties of chocolate cake during storage in comparison to cakes without icing or frosting (C) and cakes without frosting packed in polypropylene (CP). The following frostings were applied to the cakes: 10% gelatin (GE), 10% gelatin with 10% stearic acid (GE+SA), 18% "carnaúba" wax (CW), 10% modified starch (MS), and fondant (FO). The cakes were analyzed during 10 days of storage. FO and CP presented the lowest mass loss while all other treatments presented higher values than C. GE, GE+SA, and CP presented the lowest reduction of water activity while CW and C presented the highest reduction. The surfaces of the frosted cakes were harder than C and CP. The highest values for hardness and chewiness were found for CW and C and the lowest for CP, GE, and GE+SA. With respect to color, GE+SA was different from the remaining cakes due to the presence of the stearic acid. The results indicate that the mass loss of the cakes could also be attributed to the loss of water from the frostings.

O presente trabalho avaliou a utilização de farelo de trigo e polidextrose como fontes de fibra no enriquecimento de biscoitos de polvilho. Utilizou-se a Metodologia de Superfície de Resposta para verificar a influência da adição destes ingredientes nos parâmetros de qualidade dos biscoitos. As respostas avaliadas do planejamento experimental fatorial completo 2² foram o volume específico, a dureza instrumental, a umidade e a cor - parâmetros L, a* e b*. Para as respostas: volume específico e dureza instrumental, todos os fatores foram significativos, a 95% de confiança, com R² = 0,9307 e 0,8091, respectivamente. Pela análise das superfícies geradas, pode-se observar que o farelo de trigo e a polidextrose reduziram o volume específico e o farelo teve maior efeito no aumento da dureza. A substituição de polvilho azedo por farelo de trigo e polidextrose nas proporções de 1,5 e 5%, respectivamente, gerou uma amostra rica em fibras, com 6,23% de fibra alimentar (calculado teoricamente), sem prejuízo considerável para as características de expansão e dureza, e com boa aceitação sensorial.This work evaluated the use of wheat bran and polidextrose as fiber sources to enrich fermented cassava starch biscuits. The Response Surface Methodology was used to verify the influence of the addition of these fiber sources on the quality parameters of the biscuits. The responses of the 2² central composite rotational experimental design that were evaluated were specific volume, hardness, and moisture and color - parameters L, a*, and b*. For the specific volume and hardness responses, all factors were significant: 95% confidence level, with R² of 0.9307 and 0.8091, respectively. Analyzing the surfaces obtained it could be observed that the wheat bran and polidextrose reduced the specific volume and the wheat bran had a greater effect in increasing hardness. The substitution of fermented cassava starch by wheat bran and polidextrose in proportions of 1.5 and 5%, respectively, produced a fiber-rich sample with 6.23% dietary fiber (calculated theoretically) without affecting the expansion and texture characteristics negatively and with a good sensory acceptance.

A tendência do consumidor atual é utilizar alimentos de fácil preparo que, adicionalmente à qualidade nutritiva, tragam benefícios à saúde. Neste trabalho, uma massa alimentícia fresca funcional foi desenvolvida pela incorporação de Isolado Protéico de Soja (IPS) e polidextrose, utilizando páprica como corante. O consumo de IPS pode contribuir para a diminuição dos níveis de colesterol, enquanto a polidextrose, funcionando como fibra, pode promover a redução de risco de câncer de cólon. A otimização da formulação foi realizada utilizando-se um delineamento fatorial completo 23, considerando como variáveis independentes os teores de: i) IPS; ii) polidextrose; e iii) páprica. Os efeitos destas variáveis na qualidade da massa alimentícia foram avaliados em função das características físico-químicas (cor e teste de cozimento), textura instrumental e propriedades sensoriais. Na avaliação dos parâmetros físicos, observou-se que a cor instrumental da massa crua foi influenciada apenas pelo teor de páprica; já o tempo de cozimento (2,5 minutos), o aumento de massa (1,40 a 1,64%) e a perda de sólidos (3,80 a 5,56%) não foram influenciados pelos ingredientes utilizados; e a elasticidade (parâmetro da textura instrumental) foi reduzida com o aumento do teor de polidextrose. Na avaliação sensorial da massa crua, o aumento na porcentagem de IPS e a redução na porcentagem de polidextrose afetaram positivamente a aceitação global e a intenção de compra; e os aumentos nas porcentagens de IPS e de páprica aumentaram a aceitação da cor. Na avaliação sensorial da massa cozida, observou-se que o IPS teve influência positiva sobre a textura, enquanto que a polidextrose e a páprica afetaram negativamente este parâmetro. Entretanto, na avaliação da intenção de compra da massa cozida, não houve influência dos ingredientes adicionados. Os percentuais ideais de adição de polidextrose, isolado protéico de soja e páprica foram de 3,5, 8,0 e 1,5%, respectivamente.The trend of the current consumer is to use foods that are easy to prepare and that besides having nutritional quality provide health benefits. In this work, fresh food with functional characteristics was developed incorporating Soy Protein Isolate (SPI) and polidextrose using paprika as the coloring agent. The consumption of IPS could contribute to decrease cholesterol levels while polidextrose, acting as a fiber, could promote the reduction of risk of colon cancer. The optimization of the formulation was carried out using a 23 complete factorial design considering independent variables the following contents: i) SPI; ii) polidextrose; and iii) paprika. The effects of these variables on the quality of the food were evaluated through physical-chemical characteristics (color and cooking test), instrumental texture, and sensory analysis. Regarding the physical parameters, instrumental color of the raw pasta was affected only by the addition of paprika. The parameters cooking time (2.5 minutes), increase in mass (1.40 to 1.64%), and loss of solids (3.80 to 5.56%) were not influenced by the ingredients used. Elasticity (instrumental texture parameter) was reduced with the increase of polidextrose. Regarding sensory analysis of the raw food, an increase in the addition of SPI and a reduction in the addition of polidextrose positively affected global acceptance and purchase intention. An increases in SPI and paprika increased color acceptance. Regarding sensory analysis of the cooked food, SPI had a positive effect on texture while polidextrose and paprika negatively affected this parameter. Nevertheless, the ingredients used did not influence purchase intention of the cooked food. The ideal percentages of polidextrose, soy protein isolate, and paprika were 3.5, 8.0, and 1.5%, respectively.

Neste trabalho, estudou-se a aplicação da enzima lipase e do emulsificante monoglicerídeo em pão de forma enriquecido com fibras, com o objetivo de verificar a possibilidade de substituição do emulsificante pela enzima. Inicialmente, foi realizada a caracterização das matérias-primas principais (farinha e farelo de trigo). Os pães de forma foram elaborados pelo método de massa direta. Foi utilizado um planejamento experimental do tipo composto central rotacional com duas variáveis independentes: i) dosagem de lipase; e ii) dosagem de monoglicerídeo e, paralelamente, realizou-se um teste controle (sem adição de lipase e monoglicerídeo) para comparação. As variáveis dependentes foram as características de qualidade dos pães: i) volume específico; ii) aceitação sensorial (aparência, textura, aroma e sabor); e iii) vida de prateleira avaliada pela umidade do miolo e firmeza dos pães após 1, 4 e 7 dias do forneamento. Dentro das faixas estudadas, foi possível verificar que somente a umidade dos pães no quarto e sétimo dia após o processamento foi influenciada pela variação das dosagens de lipase e monoglicerídeo. Na avaliação sensorial, verificou-se que as notas médias atribuídas aos pães do teste controle foram inferiores à menor nota média dos ensaios do planejamento experimental, com exceção do sabor e aroma. Como não foi possível obter modelos matemáticos para todas as respostas, foram selecionados os ensaios 5 (1% monoglicerídeo), 7 (25 ppm lipase) e 9 (25 ppm lipase e 1% monoglicerídeo) do planejamento experimental, e o teste controle, para a avaliação dos resultados por análise de variância. Nas condições em que os ensaios foram conduzidos e para as faixas de lipase (0 a 50 ppm) e monoglicerídeo (0 a 2%) estudadas, verificou-se a possibilidade de substituir o monoglicerídeo por lipase em formulação de pão de forma enriquecido com fibras.In this work, the application of lipase and monoglyceride in fiber enriched pan bread was studied, to verify the possibility of substituting the emulsifier by the enzyme. Initially, the main raw materials (flour and wheat bran) were characterized. The pan breads were produced using the straight dough method. A central composite rotational design was used, with two independent variables: i) lipase dosage; and ii) monoglyceride dosage and, in parallel, a control test was carried out (without the addition of lipase and monoglyceride) for comparison. The dependent variables or responses were the quality characteristics of the breads: i) specific volume; ii) sensory acceptance (appearance, texture, aroma and taste); and iii) shelf life evaluated by crumb moisture and firmness after one, four and seven days from baking. Within the ranges studied, it was possible to verify that only crumb moisture on the fourth and seventh days after processing was influenced by the variation of the lipase and monoglyceride dosages. In the sensory evaluation, it was observed that the average scores attributed to the control breads were lower than the lowest average of the experimental design trials, except for taste and aroma. As it was not possible to obtain mathematical models for all the responses, Assays 5 (1% monoglyceride), 7 (25 ppm lipase) and 9 (25 ppm lipase and 1% monoglyceride) of the experimental design, and the control test, were selected for the evaluation of the results by analysis of variance. In the conditions used and for the dosages of lipase (0 to 50 ppm) and monoglyceride (0 to 2%) used, the possibility to substitute monoglyceride by lipase in fiber enriched pan bread was verified.

Filmes compostos de gelatina com amidos nativos de trigo, sorgo, batata e arroz foram produzidos separadamente e caracterizados quanto às propriedades físico-químicas (solubilidade em água e barreira ao vapor de água), físicas (espessura e opacidade) e mecânicas (resistência à tração e porcentagem de elongação na ruptura). As mesmas soluções filmogênicas foram preparadas e aplicadas em uvas Crimson para avaliação sensorial e acompanhamento da perda de massa durante 22 dias. As coberturas de sorgo e arroz foram as mais eficientes na extensão da vida útil (aumento de 10 dias). Entretanto, em relação aos atributos sensoriais, as uvas com cobertura de arroz não diferiram estatisticamente do controle, que apresentou as menores notas para os parâmetros de aparência global e intenção de compra. O filme de sorgo apresentou uma permeabilidade ao vapor de água de 5,40 g.mm.m-2.d.kPa, resistência à tração de 85,89 MPa, elongação de 6,61% e opacidade de 40%. Mesmo não apresentando os melhores valores de caracterização, como filme, tornou-se a melhor opção como cobertura. Na avaliação sensorial, as uvas cobertas obtiveram aceitação igual ou maior que o controle quanto à aparência global, brilho, cor e intenção de compra. Na degustação das uvas, nenhuma das coberturas exerceu influência significativa no aroma, sabor e textura, sendo aceitas pelo consumidor em todos os parâmetros.Films based on gelatin and native starches from wheat, sorghum, potato and rice were produced separately and characterized as to their physical-chemical (water solubility and water vapor permeability), physical (thickness and opacity) and mechanical (resistance to traction and percentage elongation at rupture) properties. The same solutions were prepared and applied to Crimson grapes for sensory evaluation and determination of weight loss over 22 days. The sorghum and rice coatings were the most efficient in their extending shelf life (a ten day increase). However, with respect to sensory attributes, the grapes with the rice coating did not show a statistical difference when compared to the control, which presented the lowest scores for global appearance purchase. The sorghum coating presented a water vapor permeability of 5.40 g.mm.m-2.d.kPa, resistance to traction of 85.89 MPa, stretching of 6.61% and opacity of 40%. This film did not present the best characterization values, but was the best coating option. In the sensory evaluation, the coated grapes had a better or similar acceptance, when compared to the control, as to global appearance, shine, color and purchase. With respect to the eating characteristics of the grapes, none of the coatings significantly influenced aroma, flavor and texture, and were accepted by the consumers in every parameter.