Search

Oil-in-water emulsions (EM) have been extensively used for the encapsulation of lipophilic bioactive compounds and posterior incorporation into food matrices to obtain functional foods. Conversely, novel excipient oil-in-water emulsions (EXC) present identical composition and structure as EM, albeit are not bioactive by themselves since no bioactive compound is encapsulated. Instead, EXC aims at improving the bioavailability of foods' natural bioactive compounds upon co-ingestion with nutrient-rich foods. In this work, EM and EXC were produced and their stability and functionality as delivery systems for α-tocopherol compared. Emulsions were formulated with corn oil and lecithin, and their composition was optimized using experimental designs. Formulations produced with 3 % lecithin and 5 % oil attained smallest particles sizes with the lowest polydispersity index of all tested formulations and remained stable up to 60 days. Encapsulation of α-tocopherol did not have a significative impact on the structural properties of the particles produced with the same composition. α-tocopherol stability during in vitro digestion was superior in EM regardless the processing methodology (EM stability < 50 %, EXC stability < 29 %), indicating that EM offered greater protection against the digestive environment. α-tocopherol's bioaccessibility was significantly increased when encapsulated or when digested with added excipient emulsions (82-92 % and 87-90 % for EM and EXC, respectively). In conclusion, EM were more efficient vehicles for the selected bioactive compound, however, the good results obtained with EXC imply that excipient emulsions have a great potential for applications on foods to improve their natural bioactive compounds' bioavailability without the need of further processing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

In this study, fractionated palm stearin, oleic acid, and linoleic acid were selected as the base materials to prepare human milk fat substitutes (HMFS) rich in OPO and OPL by enzymatic acidolysis combined with physical blending. Under optimum conditions, contents of OPO, OPL, and sn-2 palmitic acid in the OPO and OPL-rich triacylglycerols (TAGs) were higher than that in commercial OPO-rich TAGs, with values of 37.25%, 28.12%, and 79.44%, respectively. Physical blending the OPO and OPL-rich TAGs (47%), bovine milk fat (18%), sunflower oil (13%), coconut oil (13%), corn oil (8%), and palm oil (1%) can obtain HMFS with a fat composition that like HMF. The fatty acid, sn-2 saturated fatty acid, and TAG contents of HMFS were within the lower and upper limit of HMF. The lipolysis degree of infant formula (IF) with HMFS as fat source is 9.0% higher than that of commercial plant oil-based infant formula (PIF), and 3.4% lower than that of human milk. IF with HMFS as fat source released less saturated free fatty acids and more saturated monoacylglycerols during digestion than that of PIF, which would help improve the IF fat utilization by infants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

RuBisCO is a plant protein that can be derived from abundant and sustainable natural resources (such as duckweed), which can be used as both an emulsifying and gelling agent. Consequently, it has the potential to formulate emulsion gels that can be used for the development of plant-based replacements of whole eggs. In this study, we investigated the ability of RuBisCO-based emulsion gels to mimic the desirable properties of whole eggs. The emulsion gels contained 12.5 wt% RuBisCO and 10 wt% corn oil to mimic the macronutrient composition of real whole eggs. Initially, an oil-in-water emulsion was formed, which was then heated to convert it into an emulsion gel. The impact of oil droplet diameter (∼15, 1, and 0.2 μm) on the physicochemical properties of the emulsion gels was investigated. The lightness and hardness of the emulsion gels increased as the droplet size decreased, which meant that their appearance and texture could be modified by controlling droplet size. Different concentrations of curcumin (3, 6, and 9 mg/g oil) were incorporated into the emulsions using a pH-driven approach. The curcumin was used as a natural dual functional ingredient (colorant and nutraceutical). The yellow-orange color of curcumin allowed us to match the appearance of raw and cooked whole eggs. This study shows that whole egg analogs can be formulated using plant-based emulsion gels containing natural pigments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Published by Elsevier Ltd.)

As an alternative to the strategies currently used to deliver unsaturated fatty acids, especially, the essentials omega-6 and 3- fatty acids, the aim of this work was to investigate the effect of the incorporation of 25 e 50% (w/w) of olive, corn and linseed oil into the crystal structure of anhydrous milk fat (AMF). Fatty acid composition, atherogenicity (AI), and thrombogenicity (TI) index, crystallization kinetics, polymorphism by Rietveld method (RM), microstructure, thermal behavior, solid fat content, and lipid compatibility was evaluated. The addition of vegetable oils reduced the saturated fatty acids, and the AI and TI indices of AMF, and increased the concentration of unsaturated, specifically omega-6 and -3 fatty acids. Although vegetable oils caused changes in nucleation and crystallization kinetics, the spherulitic and crystalline morphology and the β' polymorphism of AMF were maintained. The study demonstrated the possibility of using the crystal structure of AMF as a vehicle for unsaturated fatty acids in food formulations, as an alternative to nutritional supplementation. In addition, studies on the use of RM in blends made with AMF and vegetable oil have not been found in literature, thus demonstrating the relevance of the present study., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Nanotechnology has become an option for the encapsulation of compounds, such as carotenoids. However, for the incorporation in to food, it is necessary to develop nanometric systems that are stable under the different conditions to which the food is submitted during its production, transport, and storage. Thus, with the intent to develop a stable nanoemulsion formulation for food application, the physical and chemical stability of β-carotene nanoemulsions after thermal treatments and storage under different conditions, were investigated in this work. The β-carotene nanoemulsions were formulated with corn oil, by applying high-pressure homogenization, with an average size in the 300 nm range, which is within the appropriate scale for industrial preparations, such as foods and cosmetics. The nanoemulsion droplets had negative charge (more than -25 mV) and monodisperse profile. The sample were pasteurized, sterilized, and stored at 4, 25, and 37 °C in the presence and absence of light for up to 90 days. Following the heat treatments and storage, the nanoemulsions showed no evidence of physical destabilization, retaining 70-80% of the carotenoid after the pasteurization and sterilization processes, and 70% when stored at 4 °C without light, respectively. Overall, our findings provide new information about the physical and chemical stability of β-carotene nanoemulsions during traditional thermal processes and environmental conditions., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The objective of this research was to elucidate the main factors influencing flavor retention in oil-in-water emulsions during simulated cooking, including oil droplet concentration, oil type, droplet size, and emulsifier type. Allyl methyl disulfide (AMDS), a hydrophobic flavor in garlic that is easily lost from foods during processing, storage, and preparation, was used as a model aroma compound. The impact of droplet characteristics on the flavor retention profile of AMDS-loaded emulsions subjected to simulated cooking conditions was determined, which involved heating from them from room temperature to boiling and then holding them for 30 min. The flavor retention half-time (FT 1/2 ) was calculated from the retention-time curves, i.e., the time for the flavor concentration to decrease to half its initial value. Based on FT 1/2 , the flavor retention during cooking depended on oil type: palm oil > corn oil > mineral oil. However, the mineral oil emulsions were also the most unstable to droplet coalescence during cooking. Increasing the oil droplet concentration in the emulsions increased flavor retention during cooking, but also decreased their physical stability. Based on FT 1/2 , the type of emulsifier used to formulate the emulsions also influenced flavor retention: quillaja saponin > Tween 80 > sodium caseinate > whey protein isolate. The emulsions that were most unstable to coalescence during cooking, and therefore had the largest droplet sizes, tended to have better flavor retention (longer FT 1/2 ). The observed differences in flavor retention were mainly attributed to differences in the size and location of the oil droplets during cooking. These results have important implications for the design of food matrices that can control flavor retention and release during food preparation., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Composite films based on sodium caseinate, plasticized with glycerol and incorporating oil bodies recovered by applying ultrafiltration on maize germ aqueous extract were stored at 25 °C and relevant humidity 53% and the changes in their physicochemical and mechanical properties were monitored over a storage period of 2 months. The rearrangement of the protein matrix molecules, oil droplet reorganization and movement during ageing was revealed through the generalized 2D correlation FTIR spectra analysis. Both the control and the oil bodies-containing caseinate films showed marked alterations of their mechanical and optical characteristics upon storage, mainly due to water uptake and glycerol or oil bodies movement, as the application of 2D correlation of the FTIR spectra time series revealed. The fact that the films become less transparent and, in addition, lose and then regain their mechanical strength during ageing for 70 days is essential information for the development of edible films and their commercial applications in the food industry., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The influence of carrier oil type on the chemical stability, antioxidant properties and bioaccessibility of lycopene in orange oil-in-water beverage emulsions was investigated. The emulsions were formulated with orange oil (A), which was partially (50%) replaced with tributyrin (B) or corn oil (C) because of their distinctively different fatty acid composition. The addition of corn oil enhanced the physical stability of the beverage during chilled storage by inhibiting Ostwald ripening. The formation of oxidation products was insignificant after storage for 28 days at 4 °C, regardless the type of added oil. Lycopene was more susceptible to chemical degradation in the presence of unsaturated, long chain triglycerides and the retention followed the order: A (87.94%), B (64.41%) and C (57.39%). Interestingly, bioaccessibility of lycopene was significantly lower for emulsions formulated with 50% corn oil as opposed to 100% orange oil as indicated by the simulated in vitro gastric digestion model., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

β-Carotene is a nutraceutical that acts as a coloring agent and as pro-vitamin A, but its incorporation into foods is limited because of its hydrophobicity and low chemical stability. The aim of this study was to improve the physicochemical stability of β-carotene by encapsulating into solid lipid nanoparticles (SLNPs) containing palmitic acid and corn oil, stabilized using whey protein isolate (WPI). The palmitic acid crystals covered the surface of the oil droplets and formed a solid shell to protect the encapsulated β-carotene. Corn oil decreased the exclusion of β-carotene from the solid lipid matrix to the surface of SLNPs. WPI increased the colloidal stability of the system, and improved β-carotene oxidative stability. The rate of color fading due to β-carotene degradation increased with increasing temperature and was faster at lower pH. Lower ionic strengths had a slight impact on β-carotene degradation, while higher ionic strengths accelerated β-carotene breakdown., (Copyright © 2017 Elsevier Ltd. All rights reserved.)