Search

The coatings of metal cans may release complex mixtures of migrants into the contained foods, including non-intentionally added substances (NIAS), such as reaction products. All migrating substances should be studied to demonstrate their safety. In this work, the characterisation of two epoxy and organosol coatings was performed using several techniques. Firstly, the type of coating was identified using FTIR-ATR. Screening techniques based on purge and trap (P&T) and solid-phase microextraction (SPME) coupled to GC-MS were used to investigate volatiles from coatings. For the identification of semi-volatile compounds, an appropriate extraction was performed before analysis by GC-MS. The most abundant substances were compounds with at least one benzene ring and an aldehyde or alcohol group in their structures. Furthermore, a method to quantify some of the identified volatiles was explored. Secondly, HPLC with fluorescence detection (HPLC-FLD) was used to determine non-volatile compounds such as bisphenol analogues and bisphenol A diglycidyl ethers (BADGEs), with subsequent confirmation by LC-MS/MS. Additionally, migration assays were performed by this technique to determine non-volatile compounds migrating into food simulants. Bisphenol A (BPA) and all BADGE derivatives except BADGE.HCl were detected in the migration extracts. Moreover, BADGE-solvent complexes such as BADGE.H2O.BuEtOH, BADGE.2BuEtOH, etc. were also tentatively identified using the accurate mass provided by time-of-flight mass spectrometry (TOF-MS). [ABSTRACT FROM AUTHOR]

Ultraviolet light printing inks are considered safer than the classical inks; however, despite being on the outer surface of the packaging material, their components can migrate into foodstuffs and can give rise to contamination. Photoinitiators are a part of the formulation of printing inks, being an important class of migrant, for which there have been more than 100 incidents of contamination of packaged food with photoinitiators reported through Rapid Alert System for Food and Feed (RASFF) alerts in the European Union. In this review the process of photo-polymerisation is explained in depth to provide an insight into the complexity of the process, and the diversity of potential contaminants together with their degradation products. The critical factors affecting the migration process itself are reviewed, together with analytical methods and the current legislation in the European Union and other parts of the world. [ABSTRACT FROM PUBLISHER]

Many cooking utensils are made of nylon, a material that may incorporate azodyes and where primary aromatic amines (PAAs) are the starting substances. Moreover, aromatic amines may also be present as technical impurities. Another source of PAAs could be aromatic isocyanates used as monomers in the production of polyurethanes. The aim of this work was to validate a simple LC–MS/MS method for the determination of eight primary aromatic amines (m-phenylenediamine, 2,6- and 2,4-toluenediamine, 1,5-diaminonaphthalene, aniline, 4,4′-diaminonaphenylether, 4,4′-methylenedianiline and 3,3′-dimethylbenzidine) in the aqueous food simulant 3% acetic acid (w/v). The detection limits calculated were adequate with respect to present legislation. The method was validated at four concentration levels (2, 5 10 and 20 µg kg−1). Global internal reproducibility was in the range 5.6–21.4% (RSDR) depending on the compound and concentration. Mean recoveries for all levels varied between 89 and 100%, depending on the amine. A total of 39 samples of cooking utensils were analyzed using the described method and the results obtained after the third migration test were not compliant in approximately half of the samples. [ABSTRACT FROM AUTHOR]