Search

In order to study the characteristics of fire smoke spread and temperature distribution of a large indoor pedestrian street under different heat release rates and smoke exhaust modes, this paper focuses on the analysis of fire smoke spread, visibility, smoke temperature distribution and variation curves in an atrium. This paper uses a numerical simulation method to conduct research. PyroSim fire simulation software is used to calculate this project, which is based on a full-scale experimental design scheme. The numerical simulation results show that under the conditions of higher heat release rate, the smoke spread rate is greater than that under the conditions of lower heat release rate. Furthermore, the average temperature of smoke in the atrium is also greater, up to about 400 °C. The conditions of a higher heat release rate also show the characteristics of faster generation, faster spread and a larger volume of smoke. When the smoke exhaust system is turned on, the thickness of the smoke layer and the smoke temperature decrease. There then comes a situation where the stabile section of the fire ends in advance. The simulation results of vertical temperature distribution in an atrium can fit the modified McCaffrey plume model in any case. Under all cases, the smoke temperature reaches the maximum directly above the fire source. The horizontal dimensionless smoke temperature rises under the atrium roof, and decreases exponentially with the dimensionless distance from the fire source. The greater the heat release rate of fire source is, the smaller the attenuation coefficient is, with a more than 50% change. When the smoke exhaust system is turned on, the smoke flow accelerates and the smoke is cooled rapidly. Thus, the attenuation coefficient increases. Additionally, the effect of mechanical smoke exhaust is better than natural smoke exhaust, because mechanical smoke exhaust makes air flow and heat exchange more intense. The variation amplitudes of the attenuation coefficient under natural smoke exhaust and mechanical smoke exhaust are 13% and 22%, respectively. [ABSTRACT FROM AUTHOR]

In this study, a series of numerical simulations were carried out to investigate the effect of fire shutter descending height on the smoke extraction efficiency in a large space atrium. Based on the full-scale fire experiments, this paper carried out more numerical simulations to explore factors affecting the smoke extraction efficiency in the atrium. The smoke flow characteristics, temperature distribution law and smoke extraction efficiency of natural and mechanical smoke exhaust systems were discussed under different heat release rates and fire shutter descending heights. The results show that the smoke spread rate and the average temperature of the smoke are higher with a greater heat release rate. After the mechanical smoke exhaust system is activated, the smoke layer thickness and smoke temperature decrease, and the stable period of heat release rate is shorter. In the condition of natural smoke exhaust, the smoke extraction efficiency increases exponentially with the increase of heat release rate and the descending height of the fire shutter, and the maximum smoke extraction efficiency is 48.8%. In the condition of mechanical smoke exhaust, the smoke extraction efficiency increases with the increase of mechanical exhaust velocity. When the velocity increases to the critical value (8 m/s), the smoke extraction efficiency is essentially stable. The smoke extraction efficiency is increased first with the increase of fire shutter descending height and then has a downward trend when the descending height drops to half, and the maximum smoke extraction efficiency is 70.3% in the condition of mechanical smoke exhaust. Empirical correlations between the smoke extraction efficiency and the dimensionless fire shutter descending height, the dimensionless heat release rate and the dimensionless smoke exhaust velocity have been established. The results of this study can provide a reference for the design of smoke prevention and exhaust systems in the atrium. [ABSTRACT FROM AUTHOR]