Search

In the papermaking industry, cellulose fibers often undergo a bleaching process which affects the surface of the fibers, or their overall morphology. The surface of the produced paper, which is most often used as a printing substrate, depends on the production method, the arrangement of the cellulose fibers, and the quantity and fineness of the filler. The micro-irregularities caused by the uneven distribution of fibers and surface particles of the filler make the paper's surface rough and affect the print quality and its stability when exposed to light from the moment of production to use. The unbleached cellulose fibers in the printing substrate contain natural pigments, lignin and hemicellulose that absorb UV radiation, as opposed to bleached fibers, which have higher whiteness and lightfastness. Therefore, the influence of UV radiation on the surface roughness of prints made on papers with natural unbleached and bleached hemp fibers was analyzed. This research confirmed that papers formed from unbleached fibers have rougher surface and that printed graphic products from bleached fibers have higher stability to UV radiation than those from natural, unbleached hemp fibers after 96 h of treatment in the Suntest chamber. [ABSTRACT FROM AUTHOR]

A significant increase in the consumption of recycled fiber products has been observed worldwide, and the industry is forced to solve the challenges of recycled fiber quality and add strength agents and/or virgin fibers to reach sufficient properties. In order to investigate whether the mechanical and air permeability properties of waste fiber (WF) material can be significantly improved by adding wood kraft fibers (KF), hemp soda fibers (HF), and ammonium persulfate oxidated cellulose nanofibrils (CNF), different fiber blends were prepared and tested. Results revealed the excellence of hemp fibers over wood fibers regarding the improvement of WF products. The results of WF after the addition of 10% mixed fibers (KF + HF) were higher than the results of a 50% KF addition. The impact of CNF depended on fiber composition and properties. A formula for modeling the CNF impact on different fiber compositions was proposed. Obtained fiber material samples showed suitability for home composting, thus contributing to the goals of the European Green Deal regarding reducing landfill waste and the development of cleaner products. [ABSTRACT FROM AUTHOR]

A significant increase in the consumption of recycled fiber products has been observed worldwide, and the industry is forced to solve the challenges of recycled fiber quality and add strength agents and/or virgin fibers to reach sufficient properties. In order to investigate whether the mechanical and air permeability properties of waste fiber (WF) material can be significantly improved by adding wood kraft fibers (KF), hemp soda fibers (HF), and ammonium persulfate oxidated cellulose nanofibrils (CNF), different fiber blends were prepared and tested. Results revealed the excellence of hemp fibers over wood fibers regarding the improvement of WF products. The results of WF after the addition of 10% mixed fibers (KF + HF) were higher than the results of a 50% KF addition. The impact of CNF depended on fiber composition and properties. A formula for modeling the CNF impact on different fiber compositions was proposed. Obtained fiber material samples showed suitability for home composting, thus contributing to the goals of the European Green Deal regarding reducing landfill waste and the development of cleaner products.