Search

Exploration of the reduction chemistry of the 2,2'‐bipyridine (bipy) lanthanide metallocene complexes Cp*2LnCl(bipy) and Cp*2Ln(bipy) (Cp* = C5Me5) resulted in the isolation of a series of complexes with unusual composition and structure including complexes with a single Cp* ligand, multiple azide ligands, and bipy ligands with close parallel orientations. These results not only reveal new structural types, but they also show the diverse chemistry displayed by this redox‐active platform. Treatment of Cp*2NdCl(bipy) with excess KC8 resulted in the formation of the mono‐Cp* Nd(III) complex, [K(crypt)]2[Cp*Nd(bipy)2], 1, as well as [K(crypt)][Cp*2NdCl2], 2, and the previously reported [K(crypt)][Cp*2Nd(bipy)]. A mono‐Cp* Lu(III) complex, Cp*Lu(bipy)2, 3, was also found in an attempt to make Cp*2Lu(bipy) from LuCl3, 2 equiv. of KCp*, bipy, and K/KI. Surprisingly, the (bipy)1− ligands in neighboring molecules in the structure of 3 are oriented in a parallel fashion with intermolecular C⋅⋅⋅C distances of 3.289(4) Å, which are shorter than the sum of van der Waals radii of two carbon atoms, 3.4 Å. Another product with one Cp* ligand per lanthanide was isolated from the reaction of [K(crypt)][Cp*2Eu(bipy)] with azobenzene, which afforded the dimeric Eu(II) complex, [K(crypt)]2[Cp*Eu(THF)(PhNNPh)]2, 4. Attempts to make 4 from the reaction between Cp*2Eu(THF)2 and a reduced azobenzene anion generated instead the mixed‐valent Eu(III)/Eu(II) complex, [K(crypt)][Cp*Eu(THF)(PhNNPh)]2, 5, which allows direct comparison with the bimetallic Eu(II) complex 4. Mono‐Cp* complexes of Yb(III) are obtained from reactions of the Yb(II) complex, [K(crypt)][Cp*2Yb(bipy)], with trimethylsilylazide, which afforded the tetra‐azido [K(crypt)]2[Cp*Yb(N3)4], 6, or the di‐azido complex [K(crypt)]2[Cp*Yb(N3)2(bipy)], 7 a, depending on the reaction stoichiometry. A mono‐Cp* Yb(III) complex is also isolated from reaction of [K(crypt)][Cp*2Yb(bipy)] with elemental sulfur which forms the mixed polysulfido Yb(III) complex [K(crypt)]2[Cp*Yb(S4)(S5)], 8 a. In contrast to these reactions that form mono‐Cp* products, reduction of Cp*2Yb(bipy) with 1 equiv. of KC8 in the presence of 18‐crown‐6 resulted in the complete loss of Cp* ligands and the formation of [K(18‐c‐6)(THF)][Yb(bipy)4], 9. The (bipy)1− ligands of 9 are arranged in a parallel orientation, as observed in the structure of 3, except in this case this interaction is intramolecular and involves pairs of ligands bound to the same Yb atom. Attempts to reduce further the Sm(II) (bipy)1− complex, Cp*2Sm(bipy) with 2 equiv. of KC8 in the presence of excess 18‐crown‐6 led to the isolation of a Sm(III) salt of (bipy)2− with an inverse sandwich Cp* counter‐cation and a co‐crystallized K(18‐c‐6)Cp* unit, [K2(18‐c‐6)2Cp*]2[Cp*2Sm(bipy)]2 ⋅ [K(18‐c‐6)Cp*], 10. [ABSTRACT FROM AUTHOR]

This paper explores the interaction of divalent [Sm(DippForm)2(thf)2] with substrates containing azo linkages. Treatment of [Sm(DippForm)2(thf)2] with trans‐azobenzene results in formation of mononuclear [Smlll(DippForm)2(Ph2N2)(thf)] ⋅ 3THF (1) or dinuclear [Smlll(DippForm)(Ph2N2)(thf)]2 ⋅ 4THF (2) and [Sm(DippForm)3] depending on the reaction stoichiometry, where azobenzene has undergone either a one or two electron reduction. These reactions parallel the corresponding reactions of [Sm(C5Me5)2(thf)2], but the coordination of [N2Ph2]− in 1 differs significantly from that of {Sm(C5Me5)2(Ph2N2)(thf)}. On the other hand, the structure of 2 is similar to that of the pentamethylcyclopentadienyl analogue. The reaction of [Sm(DippForm)2(thf)2] with 1H‐1,2,3‐benzotriazole also yielded a trivalent samarium complex containing benzotriazolate (btz), [Smlll(DippForm)2(btz)(thf)] ⋅ THF (3), and suggests more utilization of 1H‐1,2,3‐benzotriazole in divalent lanthanoid reduction chemistry is possible. [ABSTRACT FROM AUTHOR]

The complex [Mn(bpy)(CO)3Br], has been previously studied as both an electrocatalyst and a photocatalyst, in conjugation with a photosensitizer, for CO2 reduction to CO. This study considers the relationship between this catalytic activity and the steric and electronic nature of the aromatic diimine ligand. To this end, the π‐system in the bidentate ligand is increased step‐wise from 2,2′‐bipyridine (bpy) to 2‐(2‐pyridyl)quinoline (pq) to 2,2′‐biquinoline (bqn) in a series of three fac‐[Mn(α‐diimine)(CO)3Br] complexes. It is found that the propensity of these complexes to photochemically dimerize trends with the energy of the α‐diimine π* energy. Electrochemically, it is observed that the second reduction event in these systems becomes increasingly thermodynamically favorable and approaches the potential of the first reduction event as the π‐system expands. In fac‐[Mn(bqn)(CO)3Br], the second reduction is more favorable than the first reduction, precluding the formation of a dimer intermediate; even though, chemical reduction of fac‐[Mn(bqn)(CO)3Br] confirms that the dimer, [Mn(bqn)(CO)3Br]2 is able to form and not prevented by steric considerations. Though the second reduction potential is more positive for bqn and pq than for bpy, the CO2 reduction mechanism changes such that the overpotential for carbon dioxide reduction occurs at more negative potentials, leading to a decrease in overall catalytic activity. [ABSTRACT FROM AUTHOR]

A novel nanocomposite (TNTs‐FeS) was developed by anchoring ferrous sulfide (FeS) nanoparticles immobilized on titanate nanotubes (TNTs) by hydrothermal method to remove U(VI) and Re(VII) from aqueous solution, and the removal mechanism and efficiency were examined. The experimental results showed that the TNTs can effectively improve the dispersibility and stability of FeS. The environmental conditions, including initial solution pH, initial concentration, equilibrium time, and dosage, played an important role in the remediation process, which can affect the immobilization efficiency significantly. The maximum quantity removal of U(VI) and Re(VII) was 291.67 and 226.23 mg/g at pH of 6.0 and 12.0. The adsorption kinetics and the equilibrium isotherms of U(VI) and Re(VII) all fitted well with the pseudo‐second‐order model (R2>0.99) and the Freundlich model (R2>0.99). The main mechanism of removal by TNTs‐FeS was electrostatic attraction, chemical reduction, and surface complexation. Thus, TNTs‐FeS composites exhibited a high potential to remove U(VI) and Re(VII) heavy metal ions from the surface and groundwater. [ABSTRACT FROM AUTHOR]

Technetium‐99 is a prevalent fission product from nuclear waste. The long half‐life (211,000 yr) and environmental mobility of pertechnetate (TcO4−) render Tc particularly challenging to isolate and stabilize. Here we present two approaches for development of potential wasteforms using titanium dioxide, TiO2. Approach 1 is a low temperature chemical synthesis of TiO2 doped with Tc(IV) from TcO4− intended to mimic the Tc waste stream from the UREX family of separations and removes 98.5 % of the Tc, mainly present as edge‐shared Tc(IV) pairs. Approach 2 utilizes TiO2 to photocatalytically reduce TcO4− to Tc(IV) stabilized on the surface of or within the TiO2 lattice. The %Tc removed from solution and adsorbed to TiO2 is pH dependent, with the maximum Tc(IV) adsorbed at pH 3–4 as either TcO2 or edge‐sharing Tc(IV) octahedra. The Tc(IV)‐TiO2 composites materials formed by both approaches are suitable for consolidation into a dense wasteform by Hot Isostatic Pressing (HIPing). [ABSTRACT FROM AUTHOR]

An iridium complex [H(dmso)2]2[IrCl6] (1) is synthesized via the reaction of H2IrCl6 with DMSO in an acetone solution. The substance is thoroughly characterized using UV‐Vis, ATR‐FTIR, NMR, and EPR spectroscopies, single‐crystal and powder X‐ray diffraction. Iridium undergoes a slow spontaneous reduction to the chemical state +3 when solutions of 1 in water, hydrochloric acid, or acetone (CIr=n ⋅ 10−2−n ⋅ 10−4 M) are allowed to age in ambience. In the case of acetone solutions, the reduction is accompanied by the incorporation of DMSO molecules into the coordination sphere of Ir giving rise to trans‐[IrIIICl4(dmso)2]−. In parallel, protonated DMSO shows reactivity towards acetone to afford dimethylacetonylsulfonium cations. Red crystals of [Me2SCH2C(O)Me]2[IrCl6] (2), orange crystals of [Me2SCH2C(O)Me][IrCl4(dmso)2] (3), and yellow crystals of [H(dmso)][IrCl4(dmso)2] (4) were isolated from aged acetone solutions of 1 and studied by X‐ray crystallography. In the crystal structures of 2 and 3, dimethylacetonylsulfonium act as the cationic parts of the complexes. Meanwhile, the protonated form of DMSO, hydroxy(dimethyl)sulfonium, is found in 4. A similar aging procedure applied to an acetone solution of Os‐based analogue [H(dmso)2]2[OsCl6] afforded a novel osmium complex [Me2SCH2C(O)Me]2[OsCl6] (5), which was proven to be isostructural to 2. [ABSTRACT FROM AUTHOR]

Front Cover: A Tetrapodal Penta-Carbene Ligand and Iron(III) Complex (Eur. J. Inorg. Keywords: Carbene ligands; Iron; Magnetic properties; Structure elucidation; Tetrapodal pentadentate complexes EN Carbene ligands Iron Magnetic properties Structure elucidation Tetrapodal pentadentate complexes 1 1 1 07/18/23 20230713 NES 230713 B The Front Cover b shows selected tetrapodal-pentadentate "butterflies" taking flight. Carbene ligands, Iron, Magnetic properties, Structure elucidation, Tetrapodal pentadentate complexes. [Extracted from the article]