Search

The fast replacement of traditional gasoline port-fuel injection technology with gasoline direct-injection (GDI) vehicles is expected to have a substantial impact on urban air quality. Herein we report on effects of four prototype gasoline particle filters (GPFs) on exhausts of a 1.6 L Euro-5 GDI vehicle. Two noncoated and two filters with catalytic coatings were investigated. These filters, on average, lowered PN emissions 4-7-fold to 4.0-6.8 × 10 11 particles/km. Genotoxic PAHs were lowered 2-5-fold too with GPF-1-3, with GPF-1 having the highest efficiency, 79% and resulting in 45 ng toxic equivalent concentration (TEQ)/km. Thus, particle filtration efficiencies and reduction of the genotoxic potentials are correlated. GPF-4 showing the poorest particle filtration efficiency (66-78%) also released exhausts with highest genotoxic potential of 240-530 ng TEQ/km. We recently reported particle-number (PN) emissions of four generations of GDI vehicles (Euro-3 to Euro-6) which released, on average, 2.5 × 10 12 ± 1.8 × 10 12 particles/km exceeding the current European limit of 6.0 × 10 11 particle/km. Thus, the implementation of filters to GDI vehicles requires best-available technology (BAT) with PN efficiencies >98% and catalytic activity, to avoid store-and-release of genotoxic PAHs. In-series applications of BAT-filters to GDI vehicles can lower genotoxic PAHs and soot nanoparticles.

Bioethanol as an alternative fuel is widely used as a substitute for gasoline and also in gasoline direct injection (GDI) vehicles, which are quickly replacing traditional port-fuel injection (PFI) vehicles. Better fuel efficiency and increased engine power are reported advantages of GDI vehicles. However, increased emissions of soot-like nanoparticles are also associated with GDI technology with yet unknown health impacts. In this study, we compare emissions of a flex-fuel Euro-5 GDI vehicle operated with gasoline (E0) and two ethanol/gasoline blends (E10 and E85) under transient and steady driving conditions and report effects on particle, polycyclic aromatic hydrocarbon (PAH), and alkyl- and nitro-PAH emissions and assess their genotoxic potential. Particle number emissions when operating the vehicle in the hWLTC (hot started worldwide harmonized light-duty vehicle test cycle) with E10 and E85 were lowered by 97 and 96% compared with that of E0. CO emissions dropped by 81 and 87%, while CO 2 emissions were reduced by 13 and 17%. Emissions of selected PAHs were lowered by 67-96% with E10 and by 82-96% with E85, and the genotoxic potentials dropped by 72 and 83%, respectively. Ethanol blending appears to reduce genotoxic emissions on this specific flex-fuel GDI vehicle; however, other GDI vehicle types should be analyzed.

Iron-catalyzed diesel particle filters (DPFs) are widely used for particle abatement. Active catalyst particles, so-called fuel-borne catalysts (FBCs), are formed in situ, in the engine, when combusting precursors, which were premixed with the fuel. The obtained iron oxide particles catalyze soot oxidation in filters. Iron-catalyzed DPFs are considered as safe with respect to their potential to form polychlorinated dibenzodioxins/furans (PCDD/Fs). We reported that a bimetallic potassium/iron FBC supported an intense PCDD/F formation in a DPF. Here, we discuss the impact of fatty acid methyl ester (FAME) biofuel on PCDD/F emissions. The iron-catalyzed DPF indeed supported a PCDD/F formation with biofuel but remained inactive with petroleum-derived diesel fuel. PCDD/F emissions (I-TEQ) increased 23-fold when comparing biofuel and diesel data. Emissions of 2,3,7,8-TCDD, the most toxic congener [toxicity equivalence factor (TEF) = 1.0], increased 90-fold, and those of 2,3,7,8-TCDF (TEF = 0.1) increased 170-fold. Congener patterns also changed, indicating a preferential formation of tetra- and penta-chlorodibenzofurans. Thus, an inactive iron-catalyzed DPF becomes active, supporting a PCDD/F formation, when operated with biofuel containing impurities of potassium. Alkali metals are inherent constituents of biofuels. According to the current European Union (EU) legislation, levels of 5 μg/g are accepted. We conclude that risks for a secondary PCDD/F formation in iron-catalyzed DPFs increase when combusting potassium-containing biofuels.

With the growing number of new exhaust after-treatment systems, fuels and fuel additives for internal combustion engines, efficient and reliable methods for detecting exhaust genotoxicity and mutagenicity are needed to avoid the widespread application of technologies with undesirable effects toward public health. In a commonly used approach, organic extracts of particulates rather than complete exhaust is used for genotoxicity/mutagenicity assessment, which may reduce the reliability of the results. In the present study, we assessed the mutagenicity and the genotoxicity of complete diesel exhaust compared to an organic exhaust particle extract from the same diesel exhaust in a bacterial and a eukaryotic system, that is, a complex human lung cell model. Both, complete exhaust and organic extract were found to act mutagenic/genotoxic, but the amplitudes of the effects differed considerably. Furthermore, our data indicate that the nature of the mutagenicity may not be identical for complete exhaust and particle extracts. Because in addition, differences between the responses of the different biological systems were found, we suggest that a comprehensive assessment of exhaust toxicity is preferably performed with complete exhaust and with biological systems representative for the organisms and organs of interest (i.e., human lungs) and not only with the Ames test.

Catalytic diesel particle filters (DPFs) have evolved to a powerful environmental technology. Several metal-based, fuel soluble catalysts, so-called fuel-borne catalysts (FBCs), were developed to catalyze soot combustion and support filter regeneration. Mainly iron- and cerium-based FBCs have been commercialized for passenger cars and heavy-duty vehicle applications. We investigated a new iron/potassium-based FBC used in combination with an uncoated silicon carbide filter and report effects on emissions of polychlorinated dibenzodioxins/furans (PCDD/Fs). The PCDD/F formation potential was assessed under best and worst case conditions, as required for filter approval under the VERT protocol. TEQ-weighted PCDD/F emissions remained low when using the Fe/K catalyst (37/7.5 μg/g) with the filter and commercial, low-sulfur fuel. The addition of chlorine (10 μg/g) immediately led to an intense PCDD/F formation in the Fe/K-DPF. TEQ-based emissions increased 51-fold from engine-out levels of 95 to 4800 pg I-TEQ/L after the DPF. Emissions of 2,3,7,8-TCDD, the most toxic congener (TEF = 1.0), increased 320-fold, those of 2,3,7,8-TCDF (TEF = 0.1) even 540-fold. Remarkable pattern changes were noticed, indicating a preferential formation of tetrachlorinated dibenzofurans. It has been shown that potassium acts as a structural promoter inducing the formation of magnetite (Fe3O4) rather than hematite (Fe2O3). This may alter the catalytic properties of iron. But the chemical nature of this new catalyst is yet unknown, and we are far from an established mechanism for this new pathway to PCDD/Fs. In conclusion, the iron/potassium-catalyzed DPF has a high PCDD/F formation potential, similar to the ones of copper-catalyzed filters, the latter are prohibited by Swiss legislation.

The impact of a combined diesel particle filter-deNO(x) system (DPN) on emissions of reactive nitrogen compounds (RNCs) was studied varying the urea feed factor (α), temperature, and residence time, which are key parameters of the deNO(x) process. The DPN consisted of a platinum-coated cordierite filter and a vanadia-based deNO(x) catalyst supporting selective catalytic reduction (SCR) chemistry. Ammonia (NH₃) is produced in situ from thermolysis of urea and hydrolysis of isocyanic acid (HNCO). HNCO and NH₃ are both toxic and highly reactive intermediates. The deNO(x) system was only part-time active in the ISO8178/4 C1cycle. Urea injection was stopped and restarted twice. Mean NO and NO₂ conversion efficiencies were 80%, 95%, 97% and 43%, 87%, 99%, respectively, for α = 0.8, 1.0, and 1.2. HNCO emissions increased from 0.028 g/h engine-out to 0.18, 0.25, and 0.26 g/h at α = 0.8, 1.0, and 1.2, whereas NH₃ emissions increased from <0.045 to 0.12, 1.82, and 12.8 g/h with maxima at highest temperatures and shortest residence times. Most HNCO is released at intermediate residence times (0.2-0.3 s) and temperatures (300-400 °C). Total RNC efficiencies are highest at α = 1.0, when comparable amounts of reduced and oxidized compounds are released. The DPN represents the most advanced system studied so far under the VERT protocol achieving high conversion efficiencies for particles, NO, NO₂, CO, and hydrocarbons. However, we observed a trade-off between deNO(x) efficiency and secondary emissions. Therefore, it is important to adopt such DPN technology to specific application conditions to take advantage of reduced NO(x) and particle emissions while avoiding NH₃ and HNCO slip.

A constantly growing number of scooters produce an increasing amount of potentially harmful emissions. Due to their engine technology, two-stroke scooters emit huge amounts of adverse substances, which can induce adverse pulmonary and cardiovascular health effects. The aim of this study was to develop a system to expose a characterized triple cell coculture model of the human epithelial airway barrier, to freshly produced and characterized total scooter exhaust emissions. In exposure chambers, cell cultures were exposed for 1 and 2 h to 1:100 diluted exhaust emissions and in the reference chamber to filtered ambient air, both controlled at 5% CO(2), 85% relative humidity, and 37 degrees C. The postexposure time was 0-24 h. Cytotoxicity, used to validate the exposure system, was significantly increased in exposed cell cultures after 8 h postexposure time. (Pro-) inflammatory chemo- and cytokine concentrations in the medium of exposed cells were significantly higher at the 12 h postexposure time point. It was shown that the described exposure system (with 2 h exposure duration, 8 and 24 h postexposure time, dilution of 1:100, flow of 2 L/min as optimal exposure conditions) can be used to evaluate the toxic potential of total exhaust emissions.

Diesel exhaust contains several genotoxic compounds that may or may not penetrate diesel particulate filters (DPFs). Furthermore, the DPF-supported combustion of soot and adsorbed compounds may lead to the formation of additional pollutants. Herein, we compare the impact of 14 different DPFs on emissions of known genotoxic compounds. During a four year period, these DPFs were tested on a heavy duty diesel engine, operated in the ISO 8178/4 C1 cycle. Integral samples, including gas-phase and particle-bound matter were taken. All DPFs were efficient wall-flow filters with solid particulate number filtration efficiencies eta > 98%. On the basis of their CO, NO, and NO(2) emission characteristics, two different filter families were distinguished. DPFs with high oxidation potential (hox, n = 8) converted CO and NO besides hydrocarbons, whereas low oxidation potential DPFs (lox, n = 6) did not support CO and NO oxidation but still converted hydrocarbons. Lox-DPFs reduced NO(2) from 1.0 +/- 0.3 (engine-out) to 0.42 +/- 0.11 g/kWh (eta = 0.59), whereas hox-DPFs induced a NO(2) formation up to 3.3 +/- 0.7 g/kWh (eta = -2.16). Emissions of genotoxic PAHs decreased for both filter families. Conversion efficiencies varied for individual PAHs and were lower for lox- (eta = 0.31-0.87) than for hox-DPFs (eta = 0.75-0.98). Certain nitro-PAHs were formed indicating that nitration is an important step along PAH oxidation. For example, 1-nitronaphthalene emissions increased from 11 to 17 to 21 microg/L without, with lox-, and hox-DPFs respectively, whereas 2-nitronaphthalene emissions decreased from 25 to 19 to 4.7 microg/L. In contrast to our expectations, the nitration potential of lox-DPFs was higher than the one of hox-DPFs, despite the intense NO(2) formation of the latter. The filters converted most genotoxic PAHs and nitro-PAHs and most soot particles, acting as carriers for these compounds. Hox-DPF exhaust remains oxidizing and therefore is expected to support atmospheric oxidation reactions, whereas lox-DPF exhaust is reducing and consuming oxidants such as ozone, when mixed with ambient air.

Diesel particulate filters (DPFs) are a promising technology to detoxify diesel exhaust. However, the secondary combustion of diesel soot and associated compounds may also induce the formation of new pollutants. Diesel soot is rated as carcinogenic to humans and also acts as a carrier for a variety of genotoxic compounds such as certain polycyclic aromatic hydrocarbons (PAHs) or nitrated PAHs (nitro-PAHs). Furthermore, diesel exhaust contains considerable amounts of nitric oxide (NO), which can be converted to more powerful nitrating species like nitrogen dioxide (NO2), nitric acid (HNO3), and others. This mix of compounds may support nitration reactions in DPFs. Herein we report effects of two cordierite-based, monolithic, wall-flow DPFs on emissions of genotoxic PAHs and nitro-PAHs and compare these findings with those of a reporter gene bioassay sensitive to aryl hydrocarbons (AHs). Soot combustion was either catalyzed with an iron- or a copper/iron-based fuel additive (fuel-borne catalysts). A heavy duty diesel engine, operated according to the 8-stage ISO 8178/4 C1 cycle, was used as test platform. Emissions of all investigated 4- to 6-ring PAHs were reduced by about 40-90%, including those rated as carcinogenic. Emissions of 1- and 2-nitronaphthalene increased by about 20-100%. Among the 3-ring nitro-PAHs, emissions of 3-nitrophenanthrene decreased by about 30%, whereas 9-nitrophenanthrene and 9-nitroanthracene were found only after DPFs. In case of 4-ring nitro-PAHs, emissions of 3-nitrofluoranthene, 1-nitropyrene, and 4-nitropyrene decreased by about 40-60% with DPFs. Total AH-receptor (AHR) agonist concentrations of diesel exhaust were lowered by 80-90%, when using the iron- and copper-based DPFs. The tested PAHs accounted for < 1% of the total AHR-mediated response, indicating that considerable amounts of other aryl hydrocarbons must be present in filtered and unfiltered exhaust. We conclude that both DPFs detoxified diesel exhaust with respect to total aryl hydrocarbons, including the investigated carcinogenic PAHs, but we also noticed a secondary formation of selected nitro-PAHs. Nitration reactions were found to be stereoselective with a preferential substitution of hydrogen atoms at peri-positions. The stereoisomers obtained are related to combustion chemistry, but differ from those formed upon atmospheric nitration of PAHs.

Potential risks of a secondary formation of polychlorinated dibenzodioxins/furans (PCDD/Fs) were assessed for two cordierite-based, wall-through diesel particulate filters (DPFs) for which soot combustion was either catalyzed with an iron- or a copper-based fuel additive. A heavy duty diesel engine was used as test platform, applying the eight-stage ISO 8178/4 C1 cycle. DPF applications neither affected the engine performance, nor did they increase NO, NO2, CO, and CO2 emissions. The latter is a metric for fuel consumption. THC emissions decreased by about 40% when deploying DPFs. PCDD/F emissions, with a focus on tetra- to octachlorinated congeners, were compared under standard and worst case conditions (enhanced chlorine uptake). The iron-catalyzed DPF neither increased PCDD/F emissions, nor did it change the congener pattern, even when traces of chlorine became available. In case of copper, PCDD/F emissions increased by up to 3 orders of magnitude from 22 to 200 to 12 700 pg I-TEQ/L with fuels of < 2, 14, and 110 microg/g chlorine, respectively. Mainly lower chlorinated DD/Fs were formed. Based on these substantial effects on PCDD/F emissions, the copper-catalyzed DPF system was not approved for workplace applications, whereas the iron system fulfilled all the specifications of the Swiss procedures for DPF approval (VERT).