Search

Plastics from cathode ray tube (CRT) casings were sampled in Nigeria and analysed for their polybrominated dibenzo-p-dioxin and dibenzofuran (PBDD/F) content. PBDD/Fs, consisting mainly of PBDFs, were detected in BFR containing plastic with a median (mean) concentration of 18,000 ng/g (41,000 ng/g). The PBDD/Fs levels were highest in samples containing PBDEs, but the levels of PBDFs were two orders of magnitude higher than the levels reported in the technical PBDE mixtures and where frequently exceeding 1000 μg/g of PBDE content. These higher levels are likely to arise from additional transformation of PBDEs during production, use, recycling, or storage, but the processes responsible were not identified in this study. PBDD/Fs in CRT casings containing1,2-bistribromophenoxyethane (TBPE) were dominated by tetrabrominated dibenzo-p-dioxin (TBDDs) with concentrations around 10 μg/g of the TBPE content. The PBDD/Fs in CRT casings containing tetrabromobisphenol A (TBBPA) were found at concentrations around 0.1 μg/g of TBBPA levels. Casings treated with TBPE or TBBPA often contained PBDEs (and PBDF) as impurities-probably originating from recycled e-waste plastics. It was estimated that the 237,000 t of CRT casings stockpiled in Nigeria contain between 2 and 8 t of PBDD/Fs. The total PBDD/F contamination in polymers arising from total historic PBDE production/use is estimated in the order of 1000 t. TEQ values of CRT samples frequently exceeded the Basel Convention's provisional low POPs content of 15 ng TEQ/g. Due to the significant risks to health associated with PBDD/Fs, more detailed studies on the exposure routes from PBDD/Fs in stockpiles are needed.

Purpose: Combinatorial bio/chemical approach was applied to investigate dioxin-like contamination of soil and sediment at the petrochemical and organochlorine plant in Pancevo, Serbia, after the destruction of manufacturing facilities that occurred in the spring of 1999 and subsequent remediation actions., Materials and Methods: Soil samples were analyzed for indicator polychlorinated biphenyls (PCBs) by gas chromatography/electron capture detection (GC/ECD). Prioritized soil sample and sediment samples from the waste water channel were analyzed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). Microethoxyresorufin o-deethylase (Micro-EROD) and H4IIE-luciferase bioassays were used for monitoring of dioxin-like compounds (DLC) and for better characterization of dioxin-like activity of soil samples., Results: Bioanalytical results indicated high dioxin-like activity in one localized soil sample, while the chemical analysis confirmed the presence of large quantities of DLC: 3.0 × 10(5) ng/g d.w. of seven-key PCBs, 8.2 ng/g d.w. of PCDD/Fs, and 3.0 × 10(5) ng/g d.w. of planar and mono-ortho PCBs. In the sediment, contaminant concentrations were in the range 2-8 ng/g d.w. of PCDD/Fs and 9-20 ng/g d.w. of PCBs., Conclusions: This study demonstrates the utility of combined application of bioassays and instrumental analysis, especially for developing and transition country which do not have capacity of the expensive instrumental analysis. The results indicate the high contamination of soil in the area of petrochemical plant, and PCDD/Fs contamination of the sediment from the waste water channel originating from the ethylene dichloride production.

Background, Aim, and Scope: The main pathway for human exposure to the highly toxic polychlorinated-p-dioxins and polychlorinated furans [polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs)] is via dietary intake. Other exposure pathways may, however, be important in close proximity to point sources, such as wood preservation sites, where PCDD/F contaminated chlorophenols (CP) were previously used. In this study, a heavily PCDD/F contaminated CP saw mill site in Sweden was investigated. Human exposure through a broad spectrum of exposure pathways was assessed. Such studies are in demand since the question whether contaminated sites represent a current or future risk can only be answered by detailed site-specific risk assessments., Materials and Methods: Sampling of exposure media (soil, air, groundwater, raspberries, carrots, potatoes, grass, milk, eggs, and chicken fodder) was made. Exposure media concentrations and congener distribution patterns were used to investigate the mobilization of PCDD/Fs from soil to the environment and to calculate exposure levels for adults. Blood serum levels from site-exposed and control individuals were also analyzed., Results: Congener distribution patterns at the site were generally dominated by a specific marker congener (1234678-HpCDF), which is highly abundant in the polluted soil. The dioxin toxic equivalents (TEQ) concentrations were notably elevated as compared to national reference samples for most exposure media, and the marker congener was a major contributor to increased TEQ levels. There were also indications of soil-to-air volatilization of tetra- and penta-CDD/Fs. People who participated in the restoration of a contaminated building showed higher levels of 1234678-HpCDF compared to controls, and calculated exposure levels suggest that several site-specific exposure routes may be of importance for the daily intake of PCDD/F. CONCLUSIONS, RECOMMENDATIONS, AND PERSPECTIVES: Despite low mobility of higher chlorinated PCDD/Fs, these contaminants were transferred from the polluted soil to the surroundings and into human tissue. The extent of increased exposure from contaminated sites depends on the PCDD/F source strength of the soil, composition of the pollution, human activities, and dietary patterns of the residents. Impact from the contaminated soil on other exposure media was seen also for areas with low to moderate soil contamination. In the future, not only the levels of PCDD/F soil pollution but also the composition must be considered in risk assessments of contaminated sites.

Background, Aim, and Scope: The primary aim of this study was to explore the variations in PCDD/F levels and homologue profiles of Baltic surface sediments by comprehensively analyzing polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in samples from a large number of sites, encompassing not only previously known hotspot areas, but also sites near other potential PCDD/F sources, in pristine reference areas (in which there was no industrial activity) and offshore sites., Materials and Methods: Surface sediment samples (146 in total) were collected at various points along the Swedish coast and offshore areas. In addition, bulk deposition was sampled, monthly, at a single site in northern Sweden during 1 year. The concentrations of tetra- through octa-substituted CDD/Fs were determined in both matrices., Results: Highly elevated concentrations of PCDD/Fs were found at many sites in coastal areas and concentrations were also slightly elevated in some offshore areas. Homologue profiles varied substantially amongst samples from coastal sites, while those from offshore and other pristine sediments were relatively similar. The offshore sediments showed different profiles from those observed in the deposition samples. Sediment levels of PCDD/Fs were not generally significantly correlated to organic carbon levels, except in some pristine areas. Comparison of data obtained in this and previous studies suggest that both their levels and profiles are similar today to those observed 20 years ago in coastal and offshore areas. The only detected trend is that their levels appear to have decreased slightly in the offshore area of the Bothnian Sea., Discussion: The localization of hotspot areas along the coast, the lack of consensus between PCDD/F profiles of sediments and general background, and their weak correlations with organic carbon suggest that PCDD/Fs in the study area largely originate from local/regional emissions. However, due to complicating factors such as sediment dynamics and land upheaval, it is not possible to conclude whether these pollutants derive from recent emissions or from a combination of recent emissions and re-distribution of previous inputs., Conclusions: The results show that: elevated levels of PCDD/Fs are present in both coastal and offshore areas of the Baltic Sea, the major hotspots are close to the shore, and there are large variations in profiles, indicating that local emissions are (or have been) the major causes of pollution., Recommendations and Perspectives: In order to identify other hotspot areas and trace sources, comprehensive analysis of PCDD/Fs in surface sediments is needed in all areas of the Baltic Sea that have not been previously investigated. The high levels of PCDD/Fs observed in surface sediments also indicate a need to elucidate whether they are due mainly to current emissions or a combination of recent pollution and re-distribution of historically deposited pollutants. To do so, better understanding of sediment dynamics and present-day inputs, such as riverine inputs, industrial effluents, and leakage from contaminated soil is required. There are indications that contaminated sediments have a regional impact on fish contamination levels. However, as yet there is no statistically robust evidence linking contaminated sediments with elevated levels in Baltic biota. It should also be noted that the Baltic Sea is being massively invaded by the deep-burrowing polychaete Marenzielleria ssp., whose presence in sediments has been shown to increase water concentrations of hydrophobic pollutants. In awareness of this, it is clear that high levels in sediments cannot be ignored in risk assessments. In order to investigate the emission trends more thoroughly, analysis of PCDD/Fs in offshore sediment cores throughout the Baltic Sea is also recommended.

Background, Aim, and Scope: The distribution of chlorinated organic contaminants in groundwater and the importance of colloids were studied in groundwater from a sawmill site contaminated by chlorophenol preservatives., Materials and Methods: The groundwater was fractionated into three different size ranges: (1) >0.7 microm, (2) 0.4-0.7 microm and (3) 0.2-0.4 microm and the filtered water phase. The concentrations of chlorophenols (CP), chlorinated phenoxy phenols (PCPP), chlorinated diphenyl ethers (PCDE), chlorinated dibenzofurans (PCDF) and chlorinated dibenzo-p-dioxins (PCDD) were determined in each fraction. The colloids were characterised regarding the chemical composition using X-ray photoelectron spectroscopy (XPS)., Results: Chlorophenols were mostly found in the water fraction and PCDD/Fs were found almost exclusively in the particulate fractions. For example, the filtered water phase contained 2,100 microg l(-1) and 0.72 ng l(-1) for CPs and PCDD/Fs, respectively, and the particulate fractions contained 27 microg l(-1) and 32 ng l(-1) for CPs and PCDD/Fs, respectively. XPS evaluation of the particulate phases showed no correlation between the surface chemistry of the particle properties and the distribution of chlorinated compounds., Discussion: The results suggest that groundwater transport of CPs, PCPPs, PCDEs and PCDD/Fs may occur from contaminated sawmill sites and that the colloid-facilitated transport, especially of PCDD/Fs, is substantial. The results correlated well with previous studies of compounds sorbed to dissolved organic carbon, which indicate that dissolved and colloidal organic carbon facilitated the transport of PCDEs, PCDFs and PCDDs particularly., Conclusions: Several classes of chlorinated compounds were readily detected in the groundwater samples. Due to the differences in their physicochemical properties, CPs, PCPPs, PCDEs and PCDD/Fs vary in their partitioning between colloidal fractions and the filtered groundwater. The proportion of the bound fraction increased with an increasing hydrophobicity of the chlorinated compounds. The groundwater transport of colloid-associated pollutants from the site may be significant., Recommendations and Perspectives: The results imply that colloidal particles <0.7 microm are freely mobile in groundwater from this site. The groundwater transport of colloid-associated pollutants may be significant. However, the extent of the problem is not yet known and, thus, further research is needed to evaluate the impact of colloidal transport of hydrophobic organic contaminants. In Sweden alone, 400 to 500 sawmill sites are estimated to be contaminated with PCDD/Fs as a result of the former use of CP-based wood preservatives. The widespread use of CP mixtures for a variety of applications, including wood preservation, indicates that potential colloidal transport will be an issue of concern in many countries.

Background, Aim and Scope: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation., Main Features: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites., Results: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised., Discussion: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals., Conclusions: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future., Recommendations and Perspectives: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.

Goal, Scope and Background: The use of polybrominated diphenyl ethers (PBDEs) as flame retardants increases the risk for emissions of other brominated compounds, such as polybrominated dibenzodioxins (PBDDs) and dibenzofurans (PBDFs). The large homology in structure of PBDD/Fs and mechanism of toxic action, i.e. the capacity to activate the Ah receptor (AhR) pathway, compared to their well-studied chlorinated analogues, justifies a raised concern to study the environmental levels and fate of these compounds. Decabromodiphenyl ether (decaBDE) is the most widely used PBDE today. Studies on photolytic debromination of decaBDE in organic solvents have shown debromination of decaBDE, as well as formation of PBDFs. However, little is known about the transformation mechanisms and there are only scarce data on photoproducts and PBDE transformation in environmentally relevant matrices. In this study, mechanism-specific dioxin bioassays were used to study photolytic formation of AhR agonists in toluene solutions of decaBDE. In addition, the influence of irradiation time and UV-light wavelength on the formation was studied. PBDE congener patterns and presence of PBDD/Fs were analysed. Further, AhR agonists were analysed in agricultural soils contaminated with PBDEs. Soils were also exposed to UV-light to study changes in AhR agonist levels., Methods: Toluene solutions of decaBDE were irradiated using three different spectra of UV-light, simulating UV-A (320-400 nm), UV-AB (280-400 nm), and UV-ABC (250-400 nm). Additionally, decaBDE solutions were exposed to narrow wavelength intervals (10 nm bandwidth) with the central wavelengths 280, 290, 300, 310, 320, 330, 340, 350, 360 nm. AhR agonists in decaBDE solutions were analysed with two different bioassays, the chick embryo liver-cell assay for dioxins (Celcad) and the dioxin responsive, chemically activated luciferase expression assay (DR-Calux). Also, the decaBDE solutions were analysed with LRGC-LRMS to obtain PBDE congener patterns for breakdown of decaBDE, and with HRGC-HRMS, for presence of PBDD/Fs. Four soils were exposed to UV-AB light, under both dry and moist conditions. Levels of AhR agonists in soil extract fractions, before and after UV-exposure, were analysed with the DR-Calux., Results and Discussion: Significant levels of photoproducts able to activate the AhR pathway, up to 31 ng bio-TEQ/ml, were formed in UV-exposed decaBDE solutions. The transformation yield of decaBDE into AhR agonists was estimated to be at the 0.1%-level, on a molar basis. The net formation was highly dependent on wavelength, with the sample irradiated at 330 nm showing the highest level of dioxin-like activity. No activity was detected in controls. PBDE analysis confirmed decaBDE degradation and a clear time-dependent pattern for debromination of PBDE congeners. AhR agonist effect in the recalcitrant fractions of the soils corresponded to the levels of chemically derived TEQs, based only on chlorinated dioxin-like compounds in an earlier study. It was concluded that no significant levels of other AhR agonists, e.g. PBDFs, were accumulated in the soil. UV-light caused changes in AhR-mediated activity in the more polar and less persistent fractions of the soils, but it is not known which compounds are responsible for this., Recommendations and Perspectives: The laboratory experiments in this study show that high levels of AhR agonists can be formed as photoproducts of decaBDE and it is important to elucidate if and under which conditions this might occur in nature. However, soil analysis indicates that photoproducts of PBDE do not contribute to the accumulated levels of persistent dioxin-like compounds in agricultural soil. Still, more data is needed to fully estimate the environmental importance of PBDE photolysis and occurrence of its photoproducts in other environmental compartments. Analysis with dioxin bioassays enabled us to gather information about photoproducts formed from decaBDE even though the exact identities of these compounds were not known., Conclusion: Bioassays are valuable for studying environmental transformation processes like this, where chemical analysis and subsequent toxicological evaluation requires available standard compounds and information on toxicological potency. The use of bioassays allows a rapid evaluation of toxicological relevance.

The internal barrier of rotation (Erot) was calculated for all 209 polychlorinated biphenyls (PCBs) by using a semi-empirical method, viz. the Austin Model 1 (AMI) Hamiltonian. The difference in total energy between a forced planar state and an optimised twisted structure was defined as Erot. The Erot values were in the range of 8.33 to 483 kJ/mol, and were significantly influenced by the number of chlorine atoms in ortho position. An additional structural characteristic of the PCBs influencing Erot of ortho substituted congeners was substitution by chlorine atoms in vicinal meta positions, which is assumed to prevent outward bending of ortho substituents. This so-called buttressing effect contributed with 4 to 31 kJ/mol per added chlorine atom. In conclusion, the internal barrier of rotation, calculated for all 209 PCBs, provides an important structure dependent physico-chemical parameter for multivariate modelling of future quantitative structure-activity and structure-property relationships (QSARs/QSPRs).

32 Dutch human milk samples were analyzed for PCBs with either HRGC-ECD or HRGC-LRMS in the NCI mode. Samples were collected from three different locations in The Netherlands: Amsterdam, Rotterdam and Groningen. Quantitatively, no differences could be observed between the three localities, while in addition the congener specific pattern showed a striking similarity for all individual samples. Only principal component analysis revealed slight individual differences. Based on similarities in the PCB profiles, linear relationships were calculated between 2,3'4,4',5-PnCB (#118) or 2,2'4,4'5,5'HxCB (#153) and the most relevantnon andmonoortho PCBs exhibiting dioxinlike activity. These PCBs included 2,3,3',4,4'-PnCB (#105), 3,3',4,4'5-PnCB (#126) 2,3,3',4,4',5-HxCB (#156), 2,3,3',4,4',5'-HxCB (#157), 2,3',4,4',5,5'-HxCB (#167) and 3,3',4,4',5'5-HxCB (#169).Good linear relationships were observed between individual PCBs. Based on the results of this study, PCB #118 can be used to predict concentrations of the PCBs #105 and #126. PCB #153 can be used as a predictor for the PCBs #156, #157, #167 and #169, but also for the total toxic equivalencies (TEQs) ofnon andmonoortho PCBs present in human milk. This method using certain PCBs as predictors for other toxicological relevant congeners, can be useful and cost effective, e.g. for epidemiological studies. However, before applied a number of conditions should be met. These are: 1) A stable composition of the PCB matrix should be established. 2) A possible time dependent change in composition of the matrix should first be excluded when used over different time periods.

Induction of ethoxyresorufin-O-deethylase (EROD) activity and porphyrin accumulation shows different structure-activity relationships for different polychlorinated biphenyls (PCBs) and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Interactions between the two responses can strongly influence the induction and activity of EROD. The results support the conclusion that there are nonadditive interactions between nondioxin-like PCBs and dioxin-like compounds. The interaction between EROD activity and the porphyrin biosynthesis makes the prerequisite of additivity in the toxic equivalency factor concept for environmental mixtures highly spurious. Inhibition of EROD activity caused by non-dioxin like compounds could have a significant impact on the value of EROD activity as a biomarker in the present methods of risk assessment for these compounds.