Search

Leachate produced from hazardous waste landfills has been observed to exhibit very complex characteristics including the presence of a high amount of refractory organics and toxic elements which make it unfit for conventional treatment. This study is focused on the characterization and treatability of “hazardous waste landfill leachate” through electrocoagulation for the reduction of chemical oxygen demand (COD). Effect of different operating parameters, such as electrode material, interelectrode distance (IED), current density (CD), and electrolysis time (ET), has also been studied. For galvanized iron (GI) electrodes, a significant reduction in phenolic compounds, cadmium, lead, and zinc concentration was observed and more than 80% reduction in COD and color was achieved on a bench-scale reactor for a CD value of 41.64 A/cm2 at IED of 1.5 cm and for ET equating to 240 min. Substantiated by experimental results and statistical analysis like ANOVA and post hoc analysis, it appears that electrocoagulation is a proficient technology for the treatment of hazardous waste landfill leachate which has a huge potential for further research.

To obtain a high-quality phosphorus raw material comparable in quality to the best phosphorites used in the fertiliser industry, an analysis was carried out to determine the optimal mass proportions of a meat–bone meal and sewage sludge mixture to be used in a co-combustion process. The ashes obtained contained hydroxyapatite that could be considered a high-quality substitute for phosphorites, with an average P2O5 content of 33.5%. These ashes do not contain fluorine compounds, cadmium content is at trace levels and they do not contain the radioactive compounds that are present in trace amounts in all phosphates. The developed process is an example of a production complex using cleaner technologies and circular economy principles on a microeconomic scale.

Paddy field soil contaminated by cadmium may produce cadmium-contained corns causing Itai-itai disease, and in situ washing of soil with the organic acid is a good technical choice due to its convenience and cost-effectiveness. While the bottleneck of this technique is how to recycle the huge volume of washing effluent in an efficient and economical way. Biosorption of cadmium on the garlic peel was attempted in present study and it was found quite satisfactorily effective to remove all cadmium from the real soil leaching effluent after three-time sequential adsorption. The systematical investigation on the effect of various parameters on the adsorption of cadmium on garlic peel in the existence of tartaric ligand was performed and it was found that tartrate could change Cd2+ into Cd(tar)0 species whose electrical charge state would restrain its approach to the adsorbent particles. The porous microstructure in the transversal surface of garlic peel and the abundant groups of -COOH are the main factors affecting the adsorption capability. A demonstrative flowsheet of soil remediation by chemical washing coupled with biosorption was proposed correspondingly, in which the cadmium could be recovered from the soil washing effluent, and the recovered effluent was reused for next soil washing, and recovered garlic peel was reused for cadmium adsorption from the effluents again, showing a great prospect in the remediation of paddy field soil contaminated by cadmium. Garlic peel was used to remove the cadmium from the soil washing effluent.

Pre-treatment process carried out on raw municipal solid waste incineration (MSWI) fly ash (FA) sample that did not comply initially with the USEPA method 1311 toxicity characteristic leaching procedure (TCLP) regulatory limits of 2011 reduced its chloride and heavy metal content appreciably, thereby making it compliant with the aforementioned regulatory requirement. More than 98% of each heavy metal was successfully removed. The process was excellent in removing cadmium (Cd) (99.99%) and very good at removing the rest. About 99.96% of Cu was eliminated, 99.96% of cobalt (Co), 99.95% of Zn, 98.61% of Cr, and 98.12% of nickel (Ni). Also, the leachate resulting from these pre-treatment steps met the China (GB 16889-2008) and USEPA method 1311 regulatory standards for safe discharge. The density and compressive strength of all the samples prepared increased as the FA content decreased. The compressive strength of all the samples passed the 1989 USEPA-recommended value of 0.34 MPa (50 psi), thereby making them suitable for industrial application. The sample that attained the highest compressive strength (2.08 MPa) after 28 days of curing incorporated 55% fly ash (FACS55), while the one with the least compressive strength (0.65 MPa) after the same period was made from only fly ash (FACS100). Moreover, the concentration of heavy metals in all the samples generally decreased with the FA content. Chromium was not detected in all the samples, thereby making this an excellent method for its immobilization. From the leachability test results, all the samples prepared met the USEPA method 1311 TCLP regulatory limits.