Search

Urban stormwater typically enters sewer networks through gully pots, which allow a primary sedimentation of solids upstream of the piped network. The regular removal and disposal of retained sediment are necessary, costly and can involve environmental risks due to the contamination of sediments with substances from the urban environment such as metals. The concentrations and speciation of Cd, Cr, Cu, Ni, Pb and Zn were analysed in sediments from 26 gully pots located in different land use areas in Stockholm, Sweden. In addition, accumulation rates of both sediment and metal masses were evaluated, providing a basis for optimising maintenance practices and better understanding of impacts of characteristic urban land use types. Metal concentrations varied by at most a factor of eight between samples and were always below Swedish polluted site guidelines for less sensitive land use, with only eight samples exceeding the guideline values for Cu and Zn for sensitive land use. Sequential extraction showed Pb and Zn to be the most mobile metals. Sediment accumulation rates varied from 0.003 to 0.197 kg/m2 impermeable surface/year. Metal accumulation rates were much more variable than metal concentrations, with a factor of up to 172 between the highest and lowest rates and the highest metal accumulation rates corresponding to the lower range of mass loads in road runoff. Differences in metal concentrations, sediment or metal mass accumulations could not be solely attributed to either traffic or catchment land use. In contrast, traction grit used for winter road maintenance, which has low (but detectable) metal concentrations, is identified as a major component of gully pot sediments, with a combined effect of both moderating metal concentrations and contributing to total mass. [ABSTRACT FROM AUTHOR]

This study details the occurrence and concentrations of organic micropollutants (OMPs) in stormwater collected from a highway bridge catchment in Sweden. The prioritized OMPs were bisphenol-A (BPA), eight alkylphenols, sixteen polycyclic aromatic hydrocarbons (PAHs), and four fractions of petroleum hydrocarbons (PHCs), along with other global parameters, namely, total organic carbon (TOC), total suspended solids (TSS), turbidity, and conductivity (EC). A Monte Carlo (MC) simulation was applied to estimate the event mean concentrations (EMC) of OMPs based on intra-event subsamples during eight rain events, and analyze the associated uncertainties. Assessing the occurrence of all OMPs in the catchment and comparing the EMC values with corresponding environmental quality standards (EQSs) revealed that BPA, octylphenol (OP), nonylphenol (NP), five carcinogenic and four non-carcinogenic PAHs, and C16-C40 fractions of PHCs can be problematic for freshwater. On the other hand, alkylphenol ethoxylates (OPnEO and NPnEO), six low molecule weight PAHs, and lighter fractions of PHCs (C10-C16) do not occur at levels that are expected to pose an environmental risk. Our data analysis revealed that turbidity has a strong correlation with PAHs, PHCs, and TSS; and TOC and EC highly associated with BPA concentrations. Furthermore, the EMC error analysis showed that high uncertainty in OMP data can influence the final interpretation of EMC values. As such, some of the challenges that were experienced in the presented research yielded suggestions for future monitoring programs to obtain more reliable data acquisition and analysis. [ABSTRACT FROM AUTHOR]

Stormwater ponds are widely used for controlling runoff quality through the sedimentation of particles and associated pollutants. Their maintenance requires regular removal and disposal of accumulated material. This necessitates an assessment of material hazardousness, including potential hazard due to its contamination by metals. Here we analyze 32 stormwater pond sediment samples from 17 facilities using several chemical analysis methods (total extraction, sequential extraction, diffusive gradients in thin-films DGT, and pore water extraction) in order to consider the complementarity and comparability of the different approaches. No clear relationship was found between analyses that have the potential to measure similar metal fractions (DGT and either fraction 1 of the sequential extraction (adsorbed and exchangeable metals and carbonates) or pore water concentrations). Loss on ignition (LOI) had a significant positive correlation with an indicator of the environmental risk developed in this paper (∑ranks) that incorporates different metals, speciations, and environmental endpoints. Large variations in metal levels were observed between ponds. As clustering was limited between the different analyses, a comprehensive analysis of different parameters is still needed to fully understand metal speciation and bioavailability. [ABSTRACT FROM AUTHOR]

The original article can be found online at https://doi.org/10.1007/s11356-022-20694-0. Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. [Extracted from the article]