Search

Plastic pollution is a notable environmental issue, being plastic widespread and characterized by long lifetime. Serious environmental problems are caused by the improper management of plastic end-of-life. In fact, plastic litter is currently detected in any environment. Biodegradable Polymers (BPs) are promising materials if correctly applied and managed at their end of life, to minimize environmental problems. However, poor data on the fate and toxicity of BPs on marine organisms still limit their applicability. In this work we tested the effects of five biodegradable polymers (polybutylene succinate, PBS; polybutylene succinate-co-butylene adipate, PBSA; polycaprolactone, PCL; poly (3-hydroxybutyrates, PHB; polylactic acid, PLA) widely used for several purposes. Adult individuals of the isopod Idotea balthica basteri were fed on these polymers for twenty-seven days by adding biodegradable microplastic polymers (BMPs) to formulated feeds at two concentrations, viz. 0.84 and 8.4 g/kg feed. The plastic fragments affected the mortality rates of the isopods, as well as the expression levels of eighteen genes (tested by Real Time qPCR) involved in stress response and detoxification processes. Our findings confirmed that I. balthica basteri is a convenient model organism to study the response to environmental pollution and emerging contaminants in the aquatic environment, and highlighted the need for the correct use of BMPs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Plastic and microplastics, including polyethylene (PE), polypropylene (PP), and polystyrene (PS), are major contributors to environmental pollution. However, there is a growing recognition of the need to investigate a wider range of plastic polymers to fully understand the extent and impacts of plastic pollution. This study focuses on the comprehensive characterization of true-to-life nanoplastics (T2LNPs) derived from polyethylene terephthalate (PET) and polyamide (PA) to enhance our understanding of environmental nanoplastics pollution. T2LNPs were produced through cryogenic mechanical fragmentation of everyday items made from these polymers. A solid methodological framework incorporating various characterization techniques was established. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and thermogravimetric analysis (TGA) were employed to study the chemical composition and confirm the absence of chemical modifications possibly occurring during fragmentation. Atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to analyze the morphology of the T2LNPs. Additionally, AFM image analysis compared to dynamic light scattering (DLS) measurements provided insights into the size distribution and the stability of the T2LNP suspensions. The results revealed the heterogeneity of T2LNPs derived from PET and PA, emphasizing the importance of studying different plastic compositions to comprehensively understand nanoplastics pollution. Lastly, the distinctive characteristics and morphology of T2LNPs were translated into the realm of biological interactions, offering initial insights into the influence of these disparities on the formation of the protein corona on the surface of T2LNPs. By proposing T2LNPs as test materials and establishing a comprehensive characterization approach, this study aims to bridge the knowledge gap regarding the behavior and toxicity of nanoplastics. Furthermore, it highlights the need for a reliable and transferable analytical package for nanoplastic characterization to facilitate future studies on the environmental impact of nanoplastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Plastic pollution is a remarkable environmental issue. In fact, plastic is widespread in the lifetime and serious environmental problems are caused by the improper management of plastic end of life, being plastic litter detected in any environment. Efforts are put to implement the development of sustainable and circular materials. In this scenario, biodegradable polymers, BPs, are promising materials if correctly applied and managed at the end of life to minimize environmental problems. However, a lack of data on BPs fate and toxicity on marine organisms, limits their applicability. In this research, the impact of microplastics obtained from BPs, BMPs, were analyzed on Paracentrotus lividus. Microplastics were produced from five biodegradable polyesters at laboratory scale by milling the pristine polymers, under cryogenic conditions. Morphological analysis of P. lividus embryos exposed to polycaprolactone (PCL), polyhydroxy butyrate (PHB) and polylactic acid (PLA) showed their delay and malformations, which at molecular level are due to variation in expression levels of eighty-seven genes involved in various cellular processes, such as skeletogenesis, differentiation and development, stress, and detoxification response. Exposure to poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA) microplastics showed no detectable effects on P. lividus embryos. These findings contribute with important data on the effect of BPs on the physiology of marine invertebrates., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

The assessment of the distribution and composition of microlitter in the sea is a great challenge. Biological indicators can be an irreplaceable tool since they measure microlitter levels in their environments in a way that is virtually impossible to replicate by direct physical measurements. Furthermore, trends can provide policymakers with statistically robust analysis. We looked into the capacity of multiple fish species to describe the distribution and composition of microlitter vertically across different compartments of the water column. A total of 502 individuals from six selected species (Scomber scombrus, Oblada melanura, Spicara smaris, Boops boops, Merluccius merluccius and Mullus barbatus) were collected on the western side of Sardinia island and allocated to three compartments: surface, mid-water and bottom. The species of the surface exhibited a higher frequency of occurrence (41.89%) of microlitter ingestion, compared to those of the mid-water and bottom (19.60%; 22.58%). A significant difference in the average number of ingested microlitter was found between the surface and the bottom compartment. All the microlitter fragments found were analysed through Fourier Transform Infrared Spectroscopy (FTIR). The comparison of the expected buoyancies of the polymers identified puth faith in the allocation of the species to the respective compartments. Therefore, considering the Marine Strategy Framework Directive objective, this approach could be useful in assessing microlitter distribution and composition vertically across the water column., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A new and more alarming source of marine contamination has been recently identified in micro and nanosized plastic fragments. Microplastics are difficult to see with the naked eye and to biodegrade in marine environment, representing a problem since they can be ingested by plankton or other marine organisms, potentially entering the food web. An important source of microplastics appears to be through sewage contaminated by synthetic fibres from washing clothes. Since this phenomenon still lacks of a comprehensive analysis, the objective of this contribution was to investigate the role of washing processes of synthetic textiles on microplastic release. In particular, an analytical protocol was set up, based on the filtration of the washing water of synthetic fabrics and on the analysis of the filters by scanning electron microscopy. The quantification of the microfibre shedding from three different synthetic fabric types, woven polyester, knitted polyester, and woven polypropylene, during washing trials simulating domestic conditions, was achieved and statistically analysed. The highest release of microplastics was recorded for the wash of woven polyester and this phenomenon was correlated to the fabric characteristics. Moreover, the extent of microfibre release from woven polyester fabrics due to different detergents, washing parameters and industrial washes was evaluated. The number of microfibres released from a typical 5 kg wash load of polyester fabrics was estimated to be over 6,000,000 depending on the type of detergent used. The usage of a softener during washes reduces the number of microfibres released of more than 35%. The amount and size of the released microfibres confirm that they could not be totally retained by wastewater treatments plants, and potentially affect the aquatic environment., (Copyright © 2017 Elsevier Ltd. All rights reserved.)