Search

Plastic pollution continuously accumulates in the environment and poses a global threat as it fragments into microplastics and nanoplastics that can harm ecosystems. To reduce the accumulation of microplastic and nanoplastic pollution, bioplastics made from biodegradable materials are promoted as a more sustainable alternative because it can degrade faster than plastics. However, plastics also leach out chemicals as they degrade and disintegrate, but the potential toxicity of these chemicals leaching out from plastics and especially bioplastics is poorly explored. Here, we determined the composition of leachates from plastics and bioplastics and tested their toxicity in Caenorhabditis elegans. LC-MS analysis of the leachates revealed that bioplastics leached a wider array of chemicals than their counterpart plastics. Toxicity testing in our study showed that the leachates from plastics and bioplastics reduced lifespan, decreased locomotion, and induced neurotoxicity in C. elegans. Leachates from bioplastics reduced C. elegans lifespan more compared to leachates from plastics: by 7%–31% for bioplastics and by 6%–15% for plastics. Leachates from plastics decreased locomotion in C. elegans more compared to leachates from bioplastics: by 8%–34% for plastics and by 11%–24% for bioplastics. No changes were observed in the ability of the C. elegans to respond to mechanical stimuli. The leachates induced neurotoxicity in the following neurons at varying trends: cholinergic neurons by 0%–53% for plastics and by 30%–42% for bioplastics, GABAergic neurons by 3%–29% for plastics and by 10%–23% for bioplastics, and glutamatergic neurons by 3%–11% for plastics and by 15%–29% for bioplastics. Overall, our study demonstrated that chemicals leaching out from plastics and bioplastics can be toxic, suggesting that both plastics and bioplastics pose ecotoxicological and human health risks. [Display omitted] • Bioplastics generally leached a wider array of chemicals than plastics. • Leachates from both plastics and bioplastics demonstrated toxicity in C. elegans. • The leachates reduced lifespan and decreased locomotion. • The leachates were toxic to cholinergic, GABAergic, and glutamatergic neurons. [ABSTRACT FROM AUTHOR]

Biodegradable film mulching has attracted considerable attention as an alternative to conventional plastic film mulching. However, biodegradable films generate transitory microplastics during the film degradation. How much of this transitory microplastics is being formed and their impact on soil health during long-term use of biodegradable plastic film are not known. Here, we quantified the amounts of microplastics (0.1–5 mm in size) in the topsoil (0–20 cm) of two cotton fields with different mulching cultivations: (1) continuous use of conventional (polyethylene, PE) film for 23 years (Plot 1), and (2) 15 years use of conventional film followed by 8 years of biodegradable (polybutylene adipate-co-terephthalate, PBAT) film (Plot 2). We further assessed the impacts of the microplastics on selected soil health parameters, with a focus on soil carbon contents and fluxes. The total amount of microplastics was larger in Plot 2 (8507 particles kg−1) than in Plot 1 (6767 particles kg−1). The microplastics (0.1–1 mm) were identified as derived from PBAT and PE in Plot 2; while in Plot 1, the microplastics were identified as PE. Microplastics > 1 mm were exclusively identified as PE in both plots. Soil organic carbon was higher (27 vs. 30 g C kg−1 soil) but dissolved organic carbon (120 vs. 74 mg C kg−1 soil) and microbial biomass carbon were lower (413 vs. 246 mg C kg−1 soil) in Plot 2 compared to the Plot 1. Based on 13C natural abundance, we found that in Plot 2, carbon flow was dominated from micro- (<0.25 mm) to macroaggregates (0.25–2 and >2 mm), whereas in Plot 1, carbon flow occurred between large and small macroaggregates, and from micro-to macroaggregates. Thus, long-term application of biodegradable film changed the abundance of microplastics, and organic carbon accumulation compared to conventional polyethylene film mulching. [Display omitted] • Biodegradable film mulch increased the amount of microplastic in the topsoil compare to polythene film mulch. • Biodegradable film mulch increased soil organic carbon in the topsoil. • Biodegradable film mulch increased soil organic carbon in large macroaggregates. • Biodegradable film mulch increased the carbon flow from microaggregate to macroaggregates. [ABSTRACT FROM AUTHOR]

Large pieces of plastic are transformed into microplastic particles through weathering, abrasion, and ultraviolet radiation, significantly impacting the soil ecosystem. However, studies on biodegradable microplastics replacing traditional microplastics as agricultural mulching films to drive the biogeochemical processes influenced by GHG are still in their initial stages, with limited relevant reports available. This study sought to investigate the effects of microplastic and straw addition on CO 2 and N 2 O emissions in different soils. Herein, yellow-brown soil (S1) and fluvo-aquic soil (S2) were utilized, each treated with three different concentrations of PLA (polylactic acid) microplastics (0.25%, 2%, and 7% w/w) at 25 °C for 35 days, with and without straw addition. The results showed that straw (1% w/w) significantly increased soil CO 2 by 4.1-fold and 3.2-fold, respectively, and N 2 O by 1.8-fold and 1.8-fold, respectively, in cumulative emissions in S1 and S2 compared with the control. PLA microplastics significantly increased CO 2 emissions by 71.5% and 99.0% and decreased N 2 O emissions by 30.1% and 24.7% at a high concentration (7% w/w, PLA3) in S1 and S2 compared with the control, respectively. The same trend was observed with the addition of straw and microplastics together. Structural equation modeling and redundancy analysis confirmed that soil physiochemical parameters, enzyme and microbial activities are key factors regulating CO 2 and N 2 O emissions. The addition of microplastics is equivalent to the addition of carbon sources, which can significantly affect DOC, MBC, SOC and the abundance of carbon-associated bacteria (CbbL), thereby increasing soil CO 2 emissions. The addition of microplastics alone inhibited the activity of nitrogen cycling enzymes (urease activity), increasing the abundance of denitrifying microbes. However, adding a high amount of microplastics and straw together released plastic additives, inhibiting microbial abundance and reducing the nitrogen cycle. These effects decreased NH 4 +-N and increased NO 3 −-N, resulting in decreased N 2 O emissions. This study indicates that biodegradable microplastics could reduce soil plastic residue pollution through degradation. However, their use could also increase CO 2 emissions and decrease N 2 O emissions. Consequently, this research lays the groundwork for further investigation into the implications of utilizing biodegradable microplastics as agricultural mulch, particularly concerning soil geochemistry and GHG emissions. [Display omitted] • PLA microplastics significantly increased soil CO 2 emissions and reduced N 2 O emissions. • Straw and microplastics addition together significantly increased the emissions of soil CO 2 and N 2 O compared with those of microplastics alone. • Greenhouse gas emissions were strongly correlated with the soil physiochemical parameters and enzyme and microbial activities. [ABSTRACT FROM AUTHOR]

Nanoplastics (NPs) are easily ingested by organisms and their major accumulation organ was determined to be liver. To date, the size-dependent cytotoxicity of NPs on mammalian hepatocytes remains unclear. This study utilized mouse primary hepatocytes and catalase (CAT) as specific receptors to investigate the toxicity of NPs from cells to molecules, focusing on size-dependent effects. Results showed that the larger the particle size of NP at low doses (≤50 mg/L), the most pronounced inhibitory effect on hepatocyte viability. 20 nm NPs significantly inhibit cell viability only at high doses (100 mg/L). Larger NP particles (500 nm and 1000 nm) resulted in a massive release of lactate dehydrogenase (LDH) from the cell (cell membrane damage). Reactive oxygen species (ROS), superoxide dismutase (SOD) and CAT tests suggest that NPs disturbed the cellular antioxidant system. 20 nm NPs show great strength in oxidizing lipids and disrupting mitochondrial function compared to NPs of other particle sizes. The degree of inhibition of CAT activity by different sized NPs was coherent at the cellular and molecular levels, and NP-500 had the most impact. This suggests that the structure and microenvironment of the polypeptide chain in the vicinity of the CAT active site is more susceptible to proximity and alteration by NP-500. In addition, the smaller NPs are capable of inducing relaxation of CAT backbone, disruption of H-bonding and reduction of α -helix content, whereas the larger NPs cause contraction of CAT backbone and increase in α -helix content. All NPs induce CAT fluorescence sensitization and make the chromophore microenvironment hydrophobic. This study provides new insights for NP risk assessment and applications. [Display omitted] • Larger NP particles tend to cause cell membrane rupture leading to cell death. • 100 nm NPs may be safer for the cells than the other particle sizes. • NPs entering cells affect CAT activity mainly through direct interaction with CAT. • The surface curvature of 500 nm NPs facilitate approach to the active site of CAT. [ABSTRACT FROM AUTHOR]

Owing to the significant environmental threat posed by microplastics (MPs) of varying properties, MPs research has garnered considerable attention in current academic discourse. Addressing MPs in river-lake water systems, existing studies have seldom systematically revealed the role of free radicals in the aging/degradation process of MPs. Hence, this review aims to first analyze the pollution distribution and environmental risks of MPs in river-lake water systems and to elaborate the crucial role of free radicals in them. After that, the study delves into the advancements in free radical-mediated degradation techniques for MPs, emphasizing the significance of both the generation and elimination of free radicals. Furthermore, a novel approach is proposed to precisely govern the controlled generation of free radicals for MPs' degradation by interfacial modification of the material structure. Hopefully, it will shed valuable insights for the effective control and reduction of MPs in river-lake water systems. This paper briefly describes the abundance and environmental risks of MPs in river-lake water systems and compares the research progress of various free radical-related degradation techniques, thus cleverly proposes a new insight on controllable free radical promotion mediated by interfacial modification strategies for efficient degradation of MPs. [Display omitted] • Microplastics are widely distributed in river-lake water systems. • The environmental risks of microplastics correlate closely with free radical. • Free radical-mediated degradation techniques of microplastics were elucidated. • Importance of controlling free radicals' generation and elimination was underlined. • A novel strategy on controlled promotion-generation of free radicals was proposed. [ABSTRACT FROM AUTHOR]

Cadmium is the most prevalent heavy metal pollutant in the environment and can be readily combined with micro/nanoplastics (M/NPs) to change their bioavailability. In the present study, we comprehensively investigated the effect of polystyrene (PS) NPs on dandelion plants grown under Cd stress. Cd exposure significantly inhibited the growth of dandelion seedlings, resulting in a decrease in seedling elongation from 26.47% to 28.83%, a reduction in biomass from 29.76% to 54.14%, and an exacerbation of lipid peroxidation and oxidative stress. The interaction between PS NPs and Cd resulted in the formation of larger aggregates, with the Cd bioavailability reduced by 12.56%. PS NPs affect ion absorption by regulating reactive oxygen production and increasing superoxide dismutase activity, thereby mitigating the adverse effects of Cd. PSCd aggregates induced significant changes in the metabolic profiles of dandelions, affecting various carbohydrates related to alcohols, organic acids, sugar metabolism, and bioactive components related to flavonoids and phenolic acids. Furthermore, based on a structural equation model, exposure to PSCd activated oxidative stress and nutrient absorption, thereby affecting plant growth and Cd accumulation. Overall, our study provides valuable insights into the effects of PS NPs on Cd bioavailability, accumulation, and plant growth, which are crucial for understanding the food safety of medicinal plants in a coexistence environment. [Display omitted] • Cd inhibited dandelion growth, causing lipid peroxidation and oxidative stress. • Polystyrene (PS) nano plastics (NPs) aggregated with Cd, neutralizing plant effects. • Co-exposure of PS NPs and Cd reduced Cd bioavailability by 12.56%. • PS NPs and Cd altered primary and secondary metabolites and metabolic pathways. [ABSTRACT FROM AUTHOR]

Biodegradable plastics, such as poly(butylene adipate terephthalate) (PBAT) and polylactic acid (PLA), are potential alternatives to conventional polyethylene (PE), both of which are associated with the production of microplastics (MPs). However, the toxicity of these compounds on medicinal plants and their differential effects on plant morphophysiology remain unclear. This study supplemented soils with MPs sized at 200 μm at a rate of 1% w/w and incubated them for 50 days to investigate the impact of MPs on the growth and metabolites of dandelion (Taraxacum mongolicum Hand.-Mazz.). The results demonstrated that the investigated MPs decreased the growth of dandelion seedlings, induced oxidative stress, and altered the activity of antioxidant enzymes (superoxide dismutase, peroxidase, and catalase). Based on the comprehensive toxicity assessment results, the ecological toxicity was in the following order: PE MPs > PBAT MPs > PLA MPs. Metabolomics analyses revealed metabolic reprogramming in dandelion plants, leading to the enrichment of numerous differentially accumulated metabolites (DAMs) in the leaves. These pathways include carbohydrate metabolism, energy metabolism, and biosynthesis of secondary metabolites, suggesting that dandelions respond to MP stress by enhancing the activity of sugar, organic acid, and amino acid metabolic pathways. In addition, phenolic acids and flavonoids are critical for maintaining the balance in the antioxidant defense system. Our results provide substantial insights into the toxicity of biodegradable MPs to plants and shed light on plant defense and adaptation strategies. Further assessment of the safety of biodegradable MPs in terrestrial ecosystems is essential to provide guidance for environmentally friendly management. [Display omitted] • Both conventional and biodegradable microplastics (MPs) inhibited dandelion growth. • Polyethylene MPs had bigger phytotoxicity on dandelion than biodegradable MPs. • MPs up-regulated the carbohydrate and energy metabolism of dandelion. • Exposure of dandelion to MPs affected phenolic acids and flavonoid biosynthesis. [ABSTRACT FROM AUTHOR]

Plastic bags are currently a major component of marine litter, causing aesthetical nuisance, and undesirable effects on marine fauna that ingest them or are entangled. Plastic litter also rises concern on the ecotoxicological effects due to the potential toxicity of the chemical additives leached in aquatic environments. Conventional plastic bags are made of polyethylene, either from first use or recycled, but regulations restricting single-use plastics and limiting lightweight carrier bags (<50 μm thickness) have fostered the replacement of thin PE bags by compostable materials advertised as safer for the environment. In this study, we assess the degradation of commercially available plastic bags in marine conditions at two scales: aquariums (60 days) and outdoors flow-through mesocosm (120 days). Strength at break point and other tensile strength parameters were used as ecologically relevant endpoints to track mechanical degradation. Ecotoxicity has been assessed along the incubation period using the sensitive Paracentrotus lividus embryo test. Whereas PE bags did not substantially lose their mechanical properties within the 60 d aquarium exposures, compostable bags showed remarkable weight loss and tensile strength decay, some of them fragmenting in the aquarium after 3–4 weeks. Sediment pore water inoculum promoted a more rapid degradation of compostable bags, while nutrient addition pattern did not affect the degradation rate. Longer-term mesocosms exposures supported these findings, as well as pointed out the influence of the microbial processes on the degradation efficiency of compostable/bioplastic bags. Compostable materials, in contrast toPE, showed moderate toxicity on sea-urchin larvae, partially associated to degradation of these materials, but the environmental implications of these findings remain to be assessed. These methods proved to be useful to classify plastic materials, according to their degradability in marine conditions, in a remarkably shorter time than current standard tests and promote new materials safer for the marine fauna. [Display omitted] • A rapid 60-day method to assess plastic degradation in marine aquariums is developed. • This method yields consistent results with long-term mesocosm exposures. • Strength at break is a sensitive and ecologically relevant degradation endpoint. • PE bags did not degrade while most compostable bags lost their mechanical properties. • Compostable bags showed toxicity associated to degradation, unlike PE bags. [ABSTRACT FROM AUTHOR]

Polyethylene terephthalate is a widely produced plastic polymer that exhibits considerable biodegradation resistance, making its derived microplastics ubiquitous environmental pollutants. In this study, a new yeast strain (Vanrija sp. SlgEBL5) was isolated and found to have lipase and esterase-positive capabilities for degrading polyethylene terephthalate microplastics. This isolate changed the microplastic surface charge from −19.3 to +31.0 mV and reduced more than 150 μm of its size in addition to reducing the intensity of the terephthalate, methylene, and ester bond functional groups of the polymer in 30 days. Tween 20 as a chemical auxiliary treatment combined with biodegradation increased the microplastic degradation rate from 10 to 16.6% and the thermal degradation rate from 85 to 89%. Releasing less potentially hazardous by-products like 1,2 diethyl-benzene despite the higher abundance of long-chain n-alkanes, including octadecane and tetracosane was also the result of the bio + chemical treatment. Altogether, the findings showed that Vanrija sp. SlgEBL5 has the potential as a biological treating agent for polyethylene terephthalate microplastics, and the simultaneous bio + chemical treatment enhanced the biodegradation rate and efficiency. [Display omitted] • Vanrija sp. SlgEBL5 degraded polyethylene terephthalate microplastics. • Tween 20 accelerated PET microplastic biodegradation. • Biodegradation caused chemical and physical destruction of PET microplastics. • Interfacial charge and thermal degradation behavior of the PET were changed. • The biodegradation by-products were: Benzene derivatives and long-chain n-alkanes. [ABSTRACT FROM AUTHOR]

Due to the potential impacts of microplastics (MPs) and nanoplastics (NPs) on algal growth and thereby affect the climate-relevant substances, dimethylsulfoniopropionate (DMSP) and dimethyl sulfide (DMS), we studied the polystyrene (PS) MPs and NPs of 1 μm and 80 nm impacts on the growth, chlorophyll content, reactive oxygen species (ROS), antioxidant enzyme activity, and DMS/DMSP production in Emiliania huxleyi. E. huxleyi is a prominent oceanic alga that plays a key role in DMS and DMSP production. The results revealed that high concentrations of MPs and NPs inhibited the growth, carotenoid (Car), and Chl a concentrations of E. huxleyi. However, short-time exposure to low concentrations of PS MPs and NPs stimulated the growth of E. huxleyi. Furthermore, high concentrations of MPs and NPs resulted in an increase in the superoxide anion radical (O 2 . –) production rate and a decrease in the malondialdehyde (MDA) content compared with the low concentrations. Exposure to MPs and NPs at 5 mg L−1 induced superoxide dismutase (SOD) activity as a response to scavenging ROS. High concentrations of MPs and NPs significantly inhibited the production of DMSP and DMS. The findings of this study support the potential ecotoxicological impacts of MPs and NPs on algal growth, antioxidant system, and dimethylated sulfur compounds production, which maybe potentially impact the global climate. [Display omitted] • High concentration polystyrene micro- and nanoplastics inhibited E. huxleyi growth. • Short time/low concentration micro- and nanoplastics stimulated E. huxleyi growth. • High concentration micro- and nanoplastics increased O 2 .- production rate. • High concentration micro- and nanoplastics inhibited dimethyl sulfide production. [ABSTRACT FROM AUTHOR]

Multistress effects lead to unpredicted consequences in aquatic ecotoxicology and are extremely concerning. The goal of this study was to trace how specific effects of the antibiotic salinomycin (Sal) and microplastics (MP) on the bivalve molluscs are manifested in the combined environmentally relevant exposures. Unio tumidus specimens were treated with Sal (0.6 μg L−1), MP (1 mg L−1, 2 μm size), and both at 18 °C (Mix) and 25 °C (MixT) for 14 days. The redox stress and apoptotic enzyme responses and the balance of Zn/Cu in the digestive gland were analyzed. The shared signs of stress included a decrease in NAD+/NADH and Zn/Cu ratios and lysosomal integrity and an increase in Zn-metallothioneins and cholinesterase levels. MP caused a decrease in the glutathione (GSH) concentration and redox state, total antioxidant capacity, and Zn levels. MP and Mix induced coordinated apoptotic/autophagy activities, increasing caspase-3 and cathepsin D (CtD) total and extralysosomal levels. Sal activated caspase-3 only and increased by five times Cu level in the tissue. Due to the discriminant analysis, the cumulative effect was evident in the combined exposure at 18 °C. However, under heating, the levels of NAD+, NADH, GSH, GSH/GSSG and metallothionein-related thiols were decreased, and coordination of the cytosolic and lysosomal death stimuli was distorted, confirming that heating and pollution could exert unexpected synergistic effects on aquatic life. [Display omitted] • Mussels exposed to salinomycin (Sal), microplastic (MP) and their combinations. • Common responses of NAD+/NADH, Zn/Cu, Zn-metallothionein. • MP alone causes the most noticeable damage. • All exposures without heating activate caspase-3 and (except Sal) cathepsin D. • The cumulative effect of the mixture and its distortion under the heating were detected. [ABSTRACT FROM AUTHOR]

The spread of biogenic matrices for agricultural purposes can lead to plastic input into soils, raising a question on possible consequences for the environment. Nonetheless, the current knowledge concerning the presence of plastics in biogenic matrices is very poor. Therefore, the objective of the present study was a quali-quantitative characterization of plastics in different matrices reused in agriculture as manures, digestate, compost and sewage sludges. Plastics were quantified and characterized using a Fourier Transform Infrared Spectroscopy coupled with an optical microscope (μFT-IR) in Attenuated Total Reflectance mode. Our study showed the presence of plastics in all the investigated samples, albeit with differences in the content among the matrices. We measured a lower presence in animal matrices (0.06–0.08 plastics/g wet weight w.w.), while 3.14–5.07 plastics/g w.w. were measured in sewage sludges. Fibres were the prevalent shape and plastic debris were mostly in the micrometric size. The most abundant polymers were polyester (PEST), polypropylene (PP) and polyethylene (PE). The worst case was observed in the compost sample, where 986 plastics/g w.w. were detected. The majority of these plastics were compostable and biodegradable, with only 8% consisting of fragments of PEST and PE. Our results highlighted the need to thoroughly evaluate the contribution of reused matrices in agriculture to the plastic accumulation in the soil system. [Display omitted] • The spread of biogenic matrices can contribute to plastic accumulation in the agroecosystems. • Manures and digestate are less contaminated with plastics than sewage sludges and compost. • Human wastes can introduce 100 times more plastics in soil with respect to animal ones. • Remarkable amount of compostable and biodegradable plastics found in compost. [ABSTRACT FROM AUTHOR]

Microplastics pose a significant environmental threat, with potential implications for toxic chemical release, aquatic life endangerment, and human food chain contamination. In Asia, rapid economic growth coupled with inadequate waste management has escalated plastic pollution in rivers, positioning them as focal points for environmental concern. Despite Asia's rivers being considered the most polluted with plastics globally, scholarly attention to microplastics in the region's freshwater environments is a recent development. This study undertakes a systematic review of 228 scholarly articles to map microplastic hotspots in Asian freshwater systems and synthesize current research trends within the continent. Findings reveal a concentration of research in China and Japan, primarily investigating riverine and surface waters through net-based sampling methods. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) emerge as the predominant microplastic types, frequently observed as fibers or fragments. However, the diversity of sampling methodologies and reporting metrics complicates data synthesis, underscoring the need for standardized analytical frameworks to facilitate comparative analysis. This paper delineates the distribution of microplastic hotspots and outlines the prevailing challenges and prospects in microplastic research within Asian freshwater contexts. [Display omitted] • Comprehensive review in Asian freshwater environments, based on 228 publications. • Microplastic hotspots identified in Asian rivers, highlighting pollution concerns. • Most studies use nets to sample rivers and surface waters. • PE, PP, and PET are the prevalent types, mainly as fibers or fragments. • Need for standardization of analytical methods for enhanced quantitative comparisons. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) in sludge can affect the ability of biochar-activated peroxymonosulfate (PMS) to degrade antibiotics. In this work, biochar was prepared by mixing sludge and polystyrene (PS) through hydrothermal carbonization (HTC) and high-temperature pyrolysis processes. The resulting biochar was used to activate PMS to degrade ofloxacin (OFX), levofloxacin (LEV), and pefloxacin (PFX). The addition of PS significantly enhanced the ability of biochar/PMS to degrade antibiotics and the levels of environmentally persistent free radicals (EPFRs, 4.59 × 1020 spin/g) due to the decomposition of PS. The addition of PS resulted in a slight decrease in the specific surface area of biochar (2–3 m2/g on average), but a significant increase in the concentration of EPFRs increased the removal efficiency. The activation of PMS by biochar is dominated by free radicals, accounting for about 70%, in which SO 4 •- and •OH contribute the most and O 2 •- the least. However, 1O 2 contributes 15–20% to the degradation of antibiotics in non-free radical processes. Overall, the process of biochar/PMS degradation of antibiotics is mainly dominated by free radicals, and the effect of non-free radicals is not obvious. Both hydrochar and pyrocarbon samples showed good hydrophilicity, and this property should improve the ability of active sites on biochar to degrade antibiotics. In the HTC process, PS can decompose during hydrochar preparation, with a maximum reduction value of 40.09%. The three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM) and total organic carbon (TOC) results show that the protein content in sludge plays a major role in reducing PS, with little effect of polysaccharide and SiO 2. There are six to seven degradation intermediates of quinolone antibiotics, which are eventually degraded into CO 2 , H 2 O, and inorganic substances. The regeneration experiment showed good reusability of hydrochar and pyrocarbon, further demonstrating the suitability of biochar for the degradation of antibiotics. [Display omitted] • Polystyrene increased the signal of environmentally persistent free radicals. • Environmental persistent free radicals can activate oxidant effectively. • Free radicals contributed 70% of the total degradation process. • The protein content of sludge promoted the decomposition of polystyrene. [ABSTRACT FROM AUTHOR]

A growing number of studies have demonstrated that microplastic (MP) contamination is widespread in terrestrial ecosystems. A wide array of MPs made of conventional, fossil-based polymers differing in size and shape has been detected in soils worldwide. Recently, also MPs made of bioplastics have been found in soils, but there is a dearth of information concerning their toxicity on soil organisms. This study aimed at exploring the potential toxicity induced by the exposure for 28 days to irregular shaped and differently sized MPs made of a fossil-based (polyethylene terephthalate – PET) and a bioplastic (polylactic acid – PLA) polymer on the earthworm Eisenia foetida. Two amounts (1 g and 10 g/kg of soil, corresponding to 0.1% and 1% of soil weight) of both MP types were administered to the earthworms. A multi-level approach was used to investigate the MP-induced effects at sub-individual and individual level. Changes in the activity of antioxidant and detoxifying enzymes, as well as in lipid peroxidation levels, were investigated at specific time-points (i.e., 7, 14, 21 and 28 days) as sub-individual responses. Histological analyses were performed to assess effects at tissue level, while the change in digging activity was considered as a proxy of behavioral effects. Earthworms ingested MPs made of both the polymers. MPs made of PET did not induce any adverse effect at none of the biological levels. In contrast, MPs made of PLA caused the modulation of earthworms' oxidative status as showed by a bell-shaped activity of superoxide dismutase coupled with an increase in glutathione peroxidase activity. However, neither oxidative and tissue damage, nor behavioral alteration occurred. These findings suggest that the exposure to bio-based MPs can cause higher toxicity compared to fossil-based MPs. [Display omitted] • Microplastics (MPs) made of fossil-based or bioplastic polymers were ingested by earthworms. • MPs made of polylactic acid (PLA) altered the oxidative status of earthworms. • MPs made of Polyethylene terephthalate (PET) did not induce biochemical effects. • No effects at tissue level and behaviour were induce by both microplastics types. [ABSTRACT FROM AUTHOR]

Microplastic (MP) pollution is becoming an emerging environmental concern across aquatic and terrestrial ecosystems. Plastic mulching and the use of pesticides in agriculture can lead to microplastics and agrochemicals in soil, which can result in unintended exposure to non-target organisms. The combined toxicity of multiple stressors represents a significant paradigm shift within the field of ecotoxicology, and its exploration within terrestrial ecosystems involving microplastics is still relatively limited. The present study investigated the combined effects of polyethylene MP (PE-MP) and the agrochemical carbendazim (CBZ) on the earthworm Eisenia fetida at different biological levels of organization. While E. fetida survival and reproduction did not exhibit significant effects following PE-MP treatment, there was a reduction in cocoon and hatchling numbers. Notably, prolonged exposure revealed delayed toxicity, leading to substantial growth impairment. Exposure to CBZ led to significant alterations in the endpoints mentioned above. While there was a decrease in cocoon and hatchling numbers, the combined treatment did not yield significant effects on earthworm reproduction except at higher concentrations. However, lower concentrations of PE-MP alongside CBZ induced a noteworthy decline in biomass content, signifying a form of potentiation interaction. In addition, concurrent exposure led to synergistic effects, from oxidative stress to modifications in vital organs such as the body wall, intestines, and reproductive structures (spermathecae, seminal vesicles, and ovarian follicles). The comparison of multiple endpoints revealed that seminal vesicles and ovarian follicles were the primary targets during the combined exposure. The research findings suggest that there are variable and complex responses to microplastic toxicity in terrestrial ecosystems, especially when combined with other chemical stressors like agrochemicals. Despite these difficulties, the study implies that microplastics can alter earthworms' responses to agrochemical exposure, posing potential ecotoxicological risks to soil fauna. [Display omitted] • Polyethylene microplastics did not affect Eisenia fetida survival up to 1000 mg/kg. • Polyethylene microplastics and carbendazim synergistically induce oxidative stress in E. fetida. • Co-exposure of polyethylene microplastics and carbendazim inhibit E. fetida reproduction. • Multi-endpoint analysis exhibits prominent effects on seminal vesicles and ovarian follicles. [ABSTRACT FROM AUTHOR]

As emerging pollutants in the aquatic environments, micro- and nano-plastics (MNPs) aroused widespread environmental concerns for their potential threats to the ecological health. Previous research has proved that microalgae growth could recover from the MNPs toxicities, in which the extracellular polymeric substances (EPS) might play the key role. In order to comprehensively investigate the recovery process of microalgae from MNPs stress and the effecting mechanisms of EPS therein, this study conducted a series of experiments by employing two sizes (0.1 and 1 μm) of polystyrene (PS) MNPs and the marine model diatom Thalassiosira pseudonana during 14 days. The results indicated: the pigments accumulations and photosynthetic recovery of T. pseudonana under MPs exposure showed in the early stage (4–5 days), while the elevation of reactive oxygen species (ROS) and EPS contents lasted longer time period (7–8 days). EPS was aggregated with MNPs particles and microalgal cells, corresponding to the increased settlement rates. More increase of soluble (SL)-EPS contents was found than bound (B)-EPS under MNPs exposure, in which the increase of the protein proportion and humic acid-like substances in SL-EPS was found, thus facilitating aggregates formation. ROS was the signaling molecule mediating the overproduction of EPS. The transcriptional results further proved the enhanced EPS biosynthesis on the molecular level. Therefore, this study elucidated the recovery pattern of microalgae from MNPs stress and linked "ROS-EPS production changes-aggregation formation" together during the growth recovery process, with important scientific and environmental significance. [Display omitted] • Microalgae recovered time orderly under MNPs stress. • Increased EPS contents and changes of EPS compositions were stimulated by MNPs. • Aggregations of MNPs particles and microalgal cells were caused by EPS. • ROS was the signaling molecule for mediating EPS overproduction. [ABSTRACT FROM AUTHOR]

Microplastics and other microscopic debris are a concern in the coastal environment but measurements in the water column and sediment are often problematic and rely on non-standardised and highly variable methodologies. To this end, we explore the potential of different species of temperate-cold marine macroalgae as passive biomonitors of anthropogenic microparticles at three contrasting locations in southwest England. Specifically, fronds from samples of fucoids and Ulva lactuca (n = 9 in total, and three from each location) have been sectioned and analysed directly under a microscope and anthropogenic microparticles counted and subsequently characterised for chemical composition. Microparticles were heterogeneously distributed throughout sections from the same sample. However, on a dry weight basis, combined microparticle concentrations for each sample ranged from about 7.5 g-1 to 110 g−1, and from about 0.2 cm−2 to 0.9 cm−2, and for a given species were higher in samples from a semi-enclosed harbour and urban beach than in samples from a protected beach facing the open sea. These values compare with published concentrations of microplastics and microfibres reported for the regional water column on the order of 0.1 m-3. Most particles were cellulosic (e.g., rayon) and petroleum-based (mainly polyester and polyethylene terephthalate) fibres but plastic fragments were also present on most samples. Glass retroreflective beads derived from road markings were also present at up to 18 g−1 on fucoids from the urban beach because of its proximity to a stormwater effluent. Most microparticles were adhered to the smooth parts of the macroalgal surface but some displayed wrapping around edges and creases or entrapment by appendages. The practical and environmental implications of macroalgae passively capturing significant quantities of anthropogenic microparticles are discussed. [Display omitted] • Fucoids and Ulva lactuca from three locations in SW England accumulated microplastics and fibres. • Infrared analysis revealed both cellulosic (e.g., rayon) and petroleum-based materials. • Retroreflective glass beads also accumulated on fucoids in the vicinity of a stormwater drain. • Total particles numbers attached to the surface ranged from about 7.5 to 110 per g dry weight. • Macroalgae can be used as biomonitors and, potentially, bioremediators of microdebris. [ABSTRACT FROM AUTHOR]

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3–4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25–0.42 μg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9–115.0 μg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 μm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93–97% for MM DFMs and 82–83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17–18%) of other polymers compared to MM DFMs (3–7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs. [Display omitted] • FFPs release 3–4 times more MPs compared to medical/surgical face masks. • Medical/surgical masks release bisphenol B and 1,4-bis(2-ethylhexyl) sulfosuccinate. • The majority of the investigated face masks releases microplastics below 100 μm. • Fragments are the most common MP morphotype in all water-leachates from face masks. • PP, PE, PC, PET, PA, PVC, and EP copolymer are released from face masks. [ABSTRACT FROM AUTHOR]

The widespread use of synthetic turf in sports has raised health concerns due to potential risks from nanoplastic inhalation or ingestion. Our research focused on detecting nanoplastics in drainage water from a synthetic football field and evaluating the toxicity of these materials after mechanical fragmentation. We collected and analysed drainage water samples for polymer content and subjected high-density polyethylene (HDPE) straws and ethylene propylene diene monomer (EPDM) granules used on synthetic football fields, to mechanical breakdown to create nanoplastics. The results indicated the presence of trace amounts of EPDM in the water samples. Furthermore, the toxicological assessment revealed that the broken-down nanoplastics and leachate from the surface of EPDM rubber granules exhibited high toxicity to Daphnia magna , while nanoplastics from the inner material exhibited no significant toxicity. The findings highlight the urgent need for future research to identify these specific toxic agents from the surface of EPDM granules. [Display omitted] • Trace ethylene propylene diene monomer (EPDM) rubber nanoparticles were detected in sport field drainage. • Breakdown nanoplastics from the surface of EPDM granules are toxic to aquatic life. • Inner EPDM granular nanoplastics show no toxicity to organisms. • Synthetic turf poses a potential environmental threat. [ABSTRACT FROM AUTHOR]

The inclusion of hazardous substances in the formulation of plastics raises significant concerns, particularly, if those substances are released as primary leachates during plastic degradation and/or fragmentation. In this sense, the production of degradable plastics holding deleterious additives can increase the release of harmful substances into the environment. Additionally, the effects of primary leachates of "eco-friendly" materials remain unexplored. To address this, we performed exposures to primary leachates of alternative polymers, and commercial bags to verify possible responses associated with endocrine disruption and/or activation of the detoxification pathway in larvae of the marine fish model Cyprinodon variegatus. The chemical characterization evidenced a great number of additives in the formulation of the materials analyzed in this study. Those include, except for the PLA sample, relevant levels of the hazardous phthalates DEHP and DiBP. Regarding the effects on marine fish larvae, exposure to leachates from alternative polymers (10 g/L) PHB and PHBV produced remarkable mortality (100%). While the exposure to bag leachates of all tested materials (1 and 10 g/L) produced alterations in biomarkers for steroidogenic and detoxification pathways. To a lesser extent (10 g/L), three materials produced significant alterations in estrogenic biomarkers (Home-compostable bag 1, LDPE and Recycled PE bags). Although the alterations in gene expression were not directly correlated to the amount of DEHP or DiBP, we can conclude that primary leachates of "eco-friendly" bags are harmful to marine vertebrates. [Display omitted] • Quantifiable levels of DEHP and DiBP can be found in resins, conventional and alternative bags. • Primary leachates of plastic bags modulate the expression of estrogenic and steroidogenic genes. • Alterations in gene expression are not proportionally linked to the quantity of DEHP or DiBP. • Commercial bags primary leachates promote the activation of detoxification pathway in fish larvae. [ABSTRACT FROM AUTHOR]

Micro/nanoplastics (M/NPs) are the novel contaminants ubiquitous in the environment. Cadmium (Cd), a kind of heavy metal pollutant widely distributed, could potentially co-exist with PS-NPs in the environment. However, their combined effects on cardiomyocyte and its molecular mechanism in mammals remained ambiguous. Here, we examined whether PANoptosis, an emerging and complicated kind of programmed cell death, was involved in PS-NPs and Cd co-exposure-elicited cardiac injury. In this study, 60 male mice were orally subjected to environmentally relevant concentrations of PS-NPs (1 mg/kg) and/or CdCl 2 (1.5 mg/kg) for 35 days. As we speculated, PS-NPs and Cd co-exposure affected the expression of pyroptosis(Caspase-1, Cleaved-Caspase-1, GSDMD, N-GSDMD, AIM2, Pyrin, NLRP3, IL-18, IL-1β)-, apoptosis(Caspase-3, Cleaved-Caspase-3, Caspase-8, Cleaved-Caspase-8, Caspase-7, BAX)- and necroptosis (t-RIPK3, p-RIPK3, t-RIPK1, p-RIPK1, t-MLKL, p-MLKL, ZBP1)-related genes and protein, resulting in growth restriction and damaged myocardial microstructure in mice. Notably, the combined effects on Cd and PS-NPs even predominantly aggravated the toxic damage. Intriguingly, we fortuitously discovered PS-NPs and/or Cd exposure facilitated linear ubiquitination of certain proteins in mice myocardium. In summation, this study shed light toward the effects of Cd and PS-NPs on cardiotoxicity, advanced the understanding of myocardial PANoptosis and provided a scientific foundation for further exploration of the combined toxicological effects of PS-NPs and heavy metals. [Display omitted] • Co-exposure of polystyrene nanoplastics and cadmium can induce cardiomyocyte damage. • Pyroptosis, apoptosis and necroptosis synergizes to cell death (PANoptosis). • The co-exposure exacerbates separate toxicity due to their combined effects. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) and nanoplastics (NPs) are emerging pollutants in the ocean, but their transfer and toxicity along the food chains are unclear. In this study, a marine rotifer (Brachionus plicatilis)-marine medaka (Oryzias melastigma) food chain was constructed to evaluate the transfer of polystyrene MPs and NPs (70 nm, 500 nm, and 2 μm, 2000 μg/L) and toxicity of 70 nm PS-NPs (0, 20, 200, and 2000 μg/L) on marine medaka after long-term food chain exposure. The results showed that the amount of 70 nm NPs accumulated in marine medaka was 1.24 μg/mg, which was significantly higher than that of 500 nm NPs (0.87 μg/mg) and 2 μm MP (0.69 μg/mg). Long-term food chain exposure to NPs caused microflora dysbiosis, resulting in activation of toll-like receptor 4 (TLR4) pathway, which induced liver inflammation. Moreover, NPs food chain exposure increased liver and muscle tissue triglyceride and lactate content, but decreased the protein, sugar, and glycogen content. NPs food chain exposure impaired reproductive function and inhibited offspring early development, which might pose a threat to the sustainability of marine medaka population. Overall, the study revealed the transfer of MPs and NPs and the effects of NPs on marine medaka along the food chain. [Display omitted] • MPs and NPs could transfer along the rotifer-marine medaka food chain. • NPs (70 nm) were more easily accumulated in marine medaka along the food chain. • NPs (70 nm) caused intestinal damage and microbial dysbiosis in marine medaka. • Metabolism of marine medaka liver and muscle were disturbed after feeding rotifers. • Early development of marine medaka offspring was inhibited after feeding rotifers. [ABSTRACT FROM AUTHOR]

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions. [Display omitted] • Predicting protein sequences with degradation potential by hidden Markov modeling. • The analysis of plastic degradation pathways could reveal unculturable degraders. • Effective plastic degraders can be sorted and cultured in multiple ways. • Constructing artificial microbial colonies is a promising way to degrade plastic. [ABSTRACT FROM AUTHOR]

The harmful effects of microplastics (MPs) on male fertility are receiving more and more attention. However, the impact of low-dose MPs exposure on the reproductive function of male mice is still unclear. In this study, we exposed male mice to low-dose MPs (25–30 μg/kg body weight/day) or low-dose MPs combined with high-fat diet (HFD) feeding. Our results showed that low-dose MPs exposure or HFD feeding significantly reduced sperm quality and the number of offspring born, while low-dose MPs exposure combined with HFD feeding further enhanced the above effects. The combination of low-dose MPs exposure and HFD feeding resulted in a notable elevation of inflammatory level within the prostate of mice and induced apoptosis of prostate epithelium and a decrease in nutrients (zinc, citrate) in seminal plasma fluid. Our findings in this study could provide valuable clues for better understanding the influence of low-dose MPs exposure on the reproductive system under metabolic disorders and facilitate the development of the prevention of reproductive toxicity caused by MPs exposure. [Display omitted] • Low-dose Polystyrene Microplastics (MPs) exposure impaired fertility in male mice. • Low-dose MPs exposure could induce damage of prostate via inflammation and apoptosis. • High-fat diet (HFD) could execrate the reproductive toxicity induced by MPs exposure. • Weight loss could alleviate fertility damage induced by HFD and MPs exposure. [ABSTRACT FROM AUTHOR]

Plastics ranging from nano-scale to micron-scale are frequently ingested by many marine animals. These particles exhibit biotoxicity and additionally perform as vectors that convey and amass adsorbed chemicals within organisms. Meanwhile, the frequency of detection of the benzophenone-3 and ciprofloxacin can be adsorbed on plastic particles, then accumulated in bivalves, causing biotoxicity. To understand their unknown accumulative kinetics in vivo affected by different plastic sizes and toxic effect from co-exposure, several scenarios were set up in which the mode organism were exposed to 0.6 mg/L of polystyrene carrying benzophenone-3 and ciprofloxacin in three sizes (300 nm, 38 μm, and 0.6 mm). The live Asian green mussels were chosen as mode organism for exposure experiments, in which they were exposed to environments with plastics of different sizes laden with benzophenone-3 and ciprofloxacin, then depurated for 7 days. The bioaccumulation and depuration kinetics of benzophenone-3 and ciprofloxacin were measured using HPLC-MS/MS after one week of exposure and depuration. Meanwhile, their toxic effect were investigated by measuring the changes in six biomarkers (condition index, reactive oxygen species, catalase, glutathione, lipid peroxidation, cytochrome P450 and DNA damage). The bioconcentration factors in mussels under different exposure conditions were 41.48–111.75 for benzophenone-3 and 6.45 to 12.35 for ciprofloxacin. The results suggested that microplastics and nanoplastics can act as carriers to increase bioaccumulation and toxicity of adsorbates in mussels in a size-dependent manner. Overproduction of reactive oxygen species caused by microplastics and nanoplastics led to increased DNA damage, lipid peroxidation, and changes in antioxidant enzymes and non-enzymatic antioxidants during exposure. Marked disruption of antioxidant defenses and genotoxic effects in mussels during depuration indicated impaired recovery. Compared to micron-scale plastic with sizes over a hundred micrometers that had little effect on bivalve bioaccumulation and toxicity, nano-scale plastic greatly enhanced the biotoxicity effect. [Display omitted] • Bioaccumulation can be accelerated by microplastics and is significantly enhanced by nanoplastics. • Benzophenone-3 was more readily bioconcentrated and less readily eliminated. • Biotoxicity induced by nanoplastics was not completely mitigated following depuration. • Microplastics and nanoplastics disrupted antioxidant systems more than chemicals alone in mussels. [ABSTRACT FROM AUTHOR]

Plastic pollution has become a major environmental concern globally, and novel and eco-friendly approaches like bioremediation are essential to mitigate the impact. Low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and expanded polystyrene (EPS) are three of the most frequently used plastic types. This study examined biodegradation of these using Zophobas atratus larvae , followed by isolation and whole genome sequencing of gut bacteria collected from larvae frass. Over 36 days, 24.04 % LDPE, 20.01 % EPS, and 15.12 % LLDPE were consumed on average by the larvae, with survival rates of 85 %, 90 %, and 87 %, respectively. Fourier transform infrared spectroscopy (FTIR) analysis of fresh plastic types, consumed plastics, and larvae frass showed proof of plastic oxidation in the gut. Frass bacteria were isolated and cultured in minimal salt media supplemented with plastics as the sole carbon source. Two isolates of bacteria were sampled from these cultures, designated PDB-1 and PDB-2. PDB-1 could survive on LDPE and LLDPE as carbon sources, whereas PDB-2 could survive on EPS. Scanning Electron Microscopy (SEM) provided proof of degradation in both cases. Both isolates were identified as strains of Pseudomonas aeruginosa, followed by sequencing, assembly, and annotation of their genomes. LDPE- and LLDPE-degrading enzymes e.g., P450 monooxygenase, alkane monooxygenase, alcohol dehydrogenase, etc. were identified in PDB-1. Similarly, phenylacetaldehyde dehydrogenase and other enzymes involved in EPS degradation were identified in PDB-2. Genes of both isolates were compared with genomes of known plastic-degrading P. aeruginosa strains. Virulence factors, antibiotic-resistance genes, and rhamnolipid biosurfactant biosynthesis genes were also identified in both isolates. This study indicated Zophobas atratus larvae as potential LDPE, LLDPE, and EPS biodegradation agent. Additionally, the isolated strains of Pseudomonas aeruginosa provide a more direct and eco-friendly solution for plastic degradation. Confirmation and modification of the plastic-degrading pathways in the bacteria may create scope for metabolic engineering in the future. [Display omitted] • Zophobas atratus is capable of consuming different types of plastics. • FTIR confirms oxidation of plastic molecules. • Pseudomonas aeruginosa from the larvae frass has plastic degrading potential. • Different potential enzymes are found in the WGS data. [ABSTRACT FROM AUTHOR]

Nanoplastics (NPs) have become common worldwide and attracted increasing attention due to their serious toxic effects. Owing to their higher surface area and volume ratios and ability to easily enter tissues, NPs impose more serious toxic effects than microplastics. However, the effect of NP exposure on vascular stenosis remains unclear. To measure the effects of polystyrene NP (PS-NP) exposure on vascular toxicity, we conducted analyses of blood biochemical parameters, pathological histology, high-throughput sequencing, and bioinformatics. Red fluorescent PS-NPs (100 nm) were effectively uptake by mouse vascular arterial tissue. The uptake of PS-NPs resulted in vascular toxicity, including alterations in lipid metabolism and thickening of the arterial wall. Based on PIWI-interacting RNA (piRNA) sequencing, 1547 and 132 differentially expressed piRNAs (DEpiRNAs) were detected in the PS-NP treatment group after 180 and 30 days, including 787 and 86 upregulated and 760 and 46 downregulated compared with the control group, respectively. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes enrichment analyses indicated that the target genes of DEpiRNAs were mostly involved in cell growth and cell motility-related signaling, such as the MAPK signaling pathway. This is the first study to highlight the alteration in piRNA levels in mouse vascular arterial tissue after PS-NP exposure. This study adds to the knowledge regarding the regulatory mechanism of pathological changes induced by PS-NP exposure. [Display omitted] • Polystyrene nanoplastic (PS-NP) induce vascular stenosis and vasculature injury. • The mice had abnormal serum glucose levels and lipid metabolism after PS-NP exposure. • The piRNAs are involved in vascular stenosis and vasculature injury caused by PS-NP exposure. [ABSTRACT FROM AUTHOR]

Several studies have focused on identifying and quantifying suspended plastics in surface and subsurface seawater. Microplastics (MPs) have attracted attention as carriers of antibiotic resistance genes (ARGs) in the marine environment. Plastispheres, specific biofilms on MP, can provide an ideal niche to spread more widely through horizontal gene transfer (HGT), thereby increasing risks to ecosystems and human health. However, the microbial communities formed on different plastic types and ARG abundances during exposure time in natural marine environments remain unclear. Four types of commonly used MPs (polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)) were periodically cultured (46, 63, and 102 d) in a field-based marine environment to study the co-selection of ARGs and microbial communities in marine plastispheres. After the first 63 d of incubation (p < 0.05), the initial 16S rRNA gene abundance of microorganisms in the plastisphere increased significantly, and the biomass subsequently decreased. These results suggest that MPs can serve as vehicles for various microorganisms to travel to different environments and eventually provide a niche for a variety of microorganisms. Additionally, the qPCR results showed that MPs selectively enriched ARGs. In particular, tetA, tetQ, sul1, and qnrS were selectively enriched in the PVC-MPs. The abundances of intl1 , a mobile genetic element, was measured in all MP types for 46 d (5.22 × 10−5 ± 8.21 × 10−6 copies/16s rRNA gene copies), 63 d (5.90 × 10−5 ± 2.49 × 10−6 copies/16s rRNA gene copies), and 102 d (4.00 × 10−5 ± 5.11 × 10−6 copies/16s rRNA gene copies). Network analysis indicated that ARG profiles co-occurred with key biofilm-forming bacteria. This study suggests that the selection of ARGs and their co-occurring bacteria in MPs could potentially accelerate their transmission through HGT in natural marine plastics. [Display omitted] • Co-selection of microbial assemblages and ARGs was explored in a field-based marine plastisphere. • Selective ARG enrichment, notably in PVC, poses health and eco risks. • Intl1, tetA, tetQ, ermB , and sul1 co-occurred with key biofilm-forming bacteria on the MP surface. [ABSTRACT FROM AUTHOR]

Plastic products are extensively used worldwide, but inadequate management of plastic waste results in significant plastic pollution. Biodegradable plastic (BPs) offers an alternative to traditional plastics, however, not all BPs can fully degrade under natural conditions. Instead, they may deteriorate into biodegradable microplastic (BMPs) at a faster rate than conventional plastic, thereby posing an additional hazard to aquatic environments. This study provides a comprehensive overview of the fate of BPs in aquatic systems and their eco-toxicological effects on aquatic organisms such as algae, invertebrates, and fish. The findings highlight that BMPs have comparable or heightened effects compared to conventional microplastics (MPs) which physiochemical characteristic of the polymer itself or by the chemical leached from the polymeric matrix can affect aquatic organisms. While BPs is not a flawless solution to address plastic pollution, future research should prioritize investigating their production, environmental behavior, ecological impact, and whether BMPs inflict greater harm than conventional MPs. [Display omitted] • The toxicity effect of biodegradable plastics (BMP) to aquatic organisms are summarized. • Not all BMP easily biodegrade in aquatic environments. • UV weathering and biofilm can alter the physicochemical properties of BMP. • BMP can have comparable or higher toxicity to aquatic organisms than conventional plastics. [ABSTRACT FROM AUTHOR]

Wastewater treatment plants (WWTPs) usually contain microplastics (MPs) due to daily influents of domestic and municipal wastewater. Thus, the WWTPs act as a point source of MPs distribution in the environment due to their incapability to remove MPs completely. In this study, MPs occurrence and distribution in anaerobic sludge from WWTPs in different regions (Kaifeng "KHP", Jinan "JSP", and Lanzhou "LGP") were studied. Followed by MPs identification by microscopy and Fourier transform infrared (FTIR) spectrum. The microbial communities associated with anaerobic sludge and MPs were also explored. The results showed that MPs concentrations were 16.5, 38.5, and 17.2 particles/g of total solids (TS) and transparent MPs accounted for 49.1%, 58.5%, and 48.3% in KHP, JSP, and LGP samples, respectively. Fibers represented the most common shape of MPs in KHP (49.1%), JSP (56.0%), and LGP (69.0%). The FTIR spectroscopy indicated the predominance of polyethylene polymer in 1–5 mm MPs. The Proteobacteria, Chloroflexi, Actinobacteria, Bacteroidetes, and Planctomycetes were the abundant phyla in all anaerobic sludge. The bacterial genera in KHP and LGP were similar, in which Caldilinea (>23%), Terrimonas (>10%), and Ferruginibacter (>7%) formed the core bacterial genera. While Rhodococcus (15.3%) and Rhodoplanes (10.9%) were dominating in JSP. The archaeal genera Methanosaeta (>69%) and Methanobrevibacter (>10%) were abundant in KHP and LGP sludge. While Methanomethylovorans accounted for 90% of JSP. Acetyltransferase and hydratase were the major bacterial enzymes, while reductase was the key archaeal enzyme in all anaerobic sludge. This study provided the baseline for MPs distribution, characterization, and MPs associated microbes in WWTPs. [Display omitted] • Microplastics varied from 16.5 to 38.5 items/g total solids in anaerobic sludge. • Transparent (48.3–58.5%) and fiber (49.1–69%) were the main MPs colors and shapes. • Larger MPs (1–5 mm) accounted for less (9.1–19%) in anaerobic sludge. • Caldilinea (23.6–38.7%) and Terrimonas (22.1%) are the dominant bacterial genera. • Methanosaeta and Methanomethylovorans were the dominant archaeal genus. [ABSTRACT FROM AUTHOR]

The definition of microplastics (MPs) is nowadays too generic from a biological perspective, since different characteristics of these particles might influence their effects. To provide experimental evidence that size is an important factor to be considered, Mediterranean mussels Mytilus galloprovincialis were exposed to five size classes of polyethylene fragments (PE-MPs, 20–50 μm, 50–100 μm, 100–250 μm, 250–500 μm, 500–1000 μm). After 10 days of exposure, MPs ingestion and mechanistic relationships between particles size and cellular effects were analysed through a wide panel of biological alterations, including immune system responses, cholinergic function, antioxidant system, lipid metabolism and peroxidation. Results were further elaborated through a Weight of Evidence approach, summarizing the overall biological significance of obtained results in a hazard index based on the number and magnitude of variations and their toxicological relevance. PE-MPs 500–1000 μm were identified as the less biologically reactive size class due to the limited ingestion of particles coupled with the lack of biological effects, followed by PE-MPs 250–500 μm, which slightly altered the cholinergic function and lysosomal membranes. Conversely, PE-MPs smaller than 250 μm provoked a more consistent onset of biological alterations in terms of immune system composition and functioning, redox homeostasis, and lipid metabolism. The overall findings of this study highlight the importance of considering the size of particles for monitoring and risk assessment of MPs, introducing a more integrated evaluation of plastic pollution that, beside particles concentration, should adequately weigh those characteristics triggering the onset of biological effects. [Display omitted] • Cellular effects of differently sized MPs (20–1000 μm) were investigated in mussels. • Limited effects were caused by MPs larger than 500 μm. • MPs between 20 and 250 μm significantly altered redox and lipid metabolism. • MPs smaller than 100 μm had the more pronounced effects on immune parameters. • Weighted criteria allowed to associate MPs size classes to cellular hazard indices. [ABSTRACT FROM AUTHOR]

The influence of petroleum-based microplastics (MPs) on phytoplankton has been extensively studied, while research on the impact of biodegradable MPs, derived from alternative plastics to contest the environmental crisis, remains limited. This study performed a 63 days co-incubation experiment to assess the effect of polylactic acid MPs (PLA-MPs) on the growth, physiology, and carbon utilization of M. aeruginosa and the change in PLA-MPs surface properties. The results showed that despite PLA-MPs induced oxidative stress and caused membrane damage in M. aeruginosa , the presence of PLA-MPs (10, 50, and 200 mg/L) triggered significant increases (p < 0.05) in the density of M. aeruginosa after 63 days. Specifically, the algal densities upon 50 and 200 mg/L PLA-MPs exposure were increased by 20.91% and 36.31% relative to the control, respectively. Meanhwhile, the reduced C/O ratio on PLA-MPs surface and change in PLA-MPs morphological characterization, which is responsible for substantially increase in the aquatic dissolved inorganic carbon concentration during the co-incubation, implying the degradation of PLA-MPs; thus, provided sufficient carbon resources that M. aeruginosa could assimilate. This was in line with the declined intracellular carbonic anhydrase content in M. aeruginosa. This study is the first attempt to uncover the interaction between PLA-MPs and M. aeruginosa , and the finding that their interaction promotes the degrading of PLA-MPs meanwhile favoring M. aeruginosa growth will help elucidate the potential risk of biodegradable MPs in aquatic environment. [Display omitted] • PLA-MPs substantially promoted the growth of M. aeruginosa • PLA-MPs did not promote the toxin production of M. aeruginosa • PLA-MPs degradation were triggered in the co-incubation experiment • Degradation of PLA-MPs reduced carbonic anhydrase content in M. aeruginosa [ABSTRACT FROM AUTHOR]

Microplastics (MPs) and nanoplastics (NPs) have gained global concern due to their detrimental effects on marine organisms. We investigated the effects of 80 nm polystyrene (PS) NPs on life history traits, ingestion, and dimethyl sulfide (DMS) and dimethylsulfoniopropionate (DMSP) production in the rotifer Brachionus plicatilis. Fluorescently labeled 80 nm PS NPs were ingested by the rotifer B. plicatilis and accumulated in the digestive tract. The lethal rates of B. plicatilis exposed to NPs were dose-dependent. High concentrations of PS NPs exposure had negative effects on developmental duration, leading to prolonged embryonic development and pre-reproductive periods, shortened reproductive period, post-reproductive period, and lifespan in B. plicatilis. High concentrations of PS NPs exposure inhibited life table demographic parameters such as age-specific survivorship and fecundity, generation time, net reproductive rate, and life expectancy. Consequently, the population of B. plicatilis was adversely impacted. Furthermore, exposure to PS NPs resulted in a reduced ingestion rate in B. plicatilis , as well as a decreased in DMS, particulate DMSP (DMSP p) concentration, and DMSP lyase activity (DLA), which exhibited a dose-response relationship. B. plicatilis grazing promoted DLA and therefore increased DMS production. PS NPs exposure caused a decline in the increased DMS induced by rotifer grazing. Our results help to understand the ecotoxicity of NPs on rotifer and their impact on the biogeochemical cycle of dimethylated sulfur compounds. [Display omitted] • The lethal rate of Brachionus plicatilis exposed to PS NPs was dose-dependent. • High concentrations of PS NPs had detrimental effects on life history of rotifers. • PS NPs had negative effects on ingestion and DMS and DMSP concentrations. [ABSTRACT FROM AUTHOR]

We investigated microplastic (MP) contamination in 16 commonly-consumed protein products (seafoods, terrestrial meats, and plant-based proteins) purchased in the United States (U.S.) with different levels of processing (unprocessed, minimally-processed, and highly-processed), brands (1 – 4 per product type, depending on availability) and store types (conventional supermarket and grocer featuring mostly natural/organic products). Mean (±stdev) MP contamination per serving among the products was 74 ± 220 particles (ranging from 2 ± 2 particles in chicken breast to 370 ± 580 in breaded shrimp). Concentrations (MPs/g tissue) differed between processing levels, with highly-processed products containing significantly more MPs than minimally-processed products (p = 0.0049). There were no significant differences among the same product from different brands or store types. Integrating these results with protein consumption data from the American public, we estimate that the mean annual exposure of adults to MPs in these proteins is 11,000 ± 29,000 particles, with a maximum estimated exposure of 3.8 million MPs/year. These findings further inform estimations of human exposure to MPs, particularly from proteins which are important dietary staples in the U.S. Subsequent research should investigate additional drivers of MPs in the human diet, including other understudied food groups sourced from both within and outside the U.S. [Display omitted] • We observed microplastic contamination ≥45 μm in 16 U.S. protein products. • Highly-processed products contained the most microplastics per gram. • Microplastic contamination did not differ between brands or store types. • Mean U.S. adult exposure from consuming these proteins is >11,000 microplastics/year. • Maximum U.S. adult exposure from these proteins is ∼3.8 million microplastics/year. [ABSTRACT FROM AUTHOR]

Plastic and microplastics, including polyethylene (PE), polypropylene (PP), and polystyrene (PS), are major contributors to environmental pollution. However, there is a growing recognition of the need to investigate a wider range of plastic polymers to fully understand the extent and impacts of plastic pollution. This study focuses on the comprehensive characterization of true-to-life nanoplastics (T2LNPs) derived from polyethylene terephthalate (PET) and polyamide (PA) to enhance our understanding of environmental nanoplastics pollution. T2LNPs were produced through cryogenic mechanical fragmentation of everyday items made from these polymers. A solid methodological framework incorporating various characterization techniques was established. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and thermogravimetric analysis (TGA) were employed to study the chemical composition and confirm the absence of chemical modifications possibly occurring during fragmentation. Atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to analyze the morphology of the T2LNPs. Additionally, AFM image analysis compared to dynamic light scattering (DLS) measurements provided insights into the size distribution and the stability of the T2LNP suspensions. The results revealed the heterogeneity of T2LNPs derived from PET and PA, emphasizing the importance of studying different plastic compositions to comprehensively understand nanoplastics pollution. Lastly, the distinctive characteristics and morphology of T2LNPs were translated into the realm of biological interactions, offering initial insights into the influence of these disparities on the formation of the protein corona on the surface of T2LNPs. By proposing T2LNPs as test materials and establishing a comprehensive characterization approach, this study aims to bridge the knowledge gap regarding the behavior and toxicity of nanoplastics. Furthermore, it highlights the need for a reliable and transferable analytical package for nanoplastic characterization to facilitate future studies on the environmental impact of nanoplastics. [Display omitted] • Mechanical fragmentation yields true-to-life nanoplastics from common plastic items. • True-to-life nanoplastics of different polymers showed distinctive characteristics. • True-to-life nanoplastics of different polymers adsorbed different protein coronas. • True-to-life nanoplastics represent environmentally relevant nanomaterials. [ABSTRACT FROM AUTHOR]

The environmental input of microplastics from personal care products has received significant attention; however, less focus has been paid to oral healthcare products. The present study assessed the occurrence of microplastics in commercially available oral healthcare products such as toothbrushes, toothpastes, toothpowder, mouthwash, dental floss, and mouth freshener spray that have a pan-India distribution. The extracted microplastics were quantified and characterised using a microscope and ATR-FTIR. All products showed microplastic contamination, where toothbrushes showed the maximum particles (30–120 particles/brush) and mouth freshener sprays (0.2–3.5 particles/ml) had the least abundance. Fragments, fibres, beads, and films were the various shapes of microplastics observed, where fragments (60%) were dominant. Various colours such as pink, green, blue, yellow, black, and colourless were observed, where colourless (40%) particles were dominant. Microplastics were categorized into three sizes: <0.1 mm (63%), 0.1–0.3 mm (35%), and >0.3 mm (2%). Four major types of polymers, such as polyethylene (52%), polyamide (30%), polyethylene terephthalate (15%), and polybutylene terephthalate (3%), were identified. Risk assessment studies such as Daily Microplastics Emission (DME), Annual Microplastics Exposure (AME), and Polymer Hazard Index (PHI) were carried out. The DME projection for India was the highest for mouthwash (74 billion particles/day) and the least for mouth freshener sprays (0.36 billion particles/day). The AME projection for an individual was the highest in toothbrushes (48,910 particles ind.−1 yr.−1) and the least in mouth freshener sprays (111 particles ind.−1 yr.−1). PHI shows that the identified polymers fall under the low-to high-risk categories. This study forecasts the community health risks linked to microplastics in oral healthcare products and suggests mitigation strategies. It has the potential to shape environmental policy development in response. [Display omitted] • Microplastics were observed in six types of oral healthcare products (OHPs). • Daily microplastic emission from OHPs in India was predicted to be 74 billion particles/day. • Predicted annual microplastic exposure from OHPs in India was 48,910 particles ind.−1 yr.−1. • Polymer hazard index classified the identified polymers as low-to high-risk. • Microplastic mitigation measures for OHPs have been proposed. [ABSTRACT FROM AUTHOR]

A growing number of studies have reported the toxic effects of nanoplastics (NPs) on organisms. However, the focus of these studies has almost exclusively been on the use of polystyrene (PS) nanospheres. Herein, we aim to evaluate the sublethal effects on Daphnia magna juveniles of three different NP polymers: PS-NPs with an average size of 200 nm, polyethylene [PE] NPs and polyvinyl chloride [PVC] NPs with a size distribution between 50 and 350 nm and a comparable mean size. For each polymer, five environmentally relevant concentrations were tested (from 2.5 to 250 μg/L) for an exposure time of 48 h. NP effects were assessed at the biochemical level by investigating the amount of reactive oxygen species (ROS) and the activity of the antioxidant enzyme catalase (CAT) and at the behavioral level by evaluating the swimming behavior (distance moved). Our results highlight that exposure to PVC-NPs can have sublethal effects on Daphnia magna at the biochemical and behavioral levels. The potential role of particle size on the measured effects cannot be excluded as PVC and PE showed a wider size range distribution than PS, with particles displaying sizes from 50 to 350 nm. However, we infer that the chemical structure of PVC, which differs from that of PE of the same range size, concurs to explain the observed effects. Consequently, as PS seems not to be the most hazardous polymer, we suggest that the use of data on PS toxicity alone can lead to an underestimation of NP hazards. [Display omitted] • Different nanoplastic polymers exhibit different toxicity. • The physical and chemical properties of nanoplastics influences their toxicity. • Polystyrene is not the most hazardous plastic polymer. • Polyinyl chloride nanoplastics induce sublethal effects to Daphnia magna. [ABSTRACT FROM AUTHOR]

Microplastic (MP) pollution presents a novel challenge for marine environmental protection, necessitating comprehensive and long-term monitoring and assessment approaches. Environmental MPs can undergo weathering and microorganism-related digestive processes, altering their original surface properties and chemical structure, thus complicating their quantification and identification. This study aims to establish a comprehensive hyperspectral database for weathered and digestion-degraded MPs, using a wide variety of polymer types collected as either virgin particles or commercial products (within a size range of approximately 3 mm), and to investigate the impact of these processes on their spectral characteristics. Polypropylene (PP) and polyethylene (PE) MPs exhibited significant responses to weathering treatment, as indicated by the formation of new characteristic peaks or slight peak shifts around 1679–1705 nm, which can be attributed to the formation of carbonyl and vinyl functional groups through Norrish reactions. Similarly, polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), and polystyrene (PS) MPs demonstrated notable degradation following digestive treatment, as evidenced by the emergence of new absorption peaks at approximately 1135–1165 nm, possibly associated with alterations involving carbonyl and vinyl functional groups. The results were further validated based on their comparable spectral characteristics of the resultant MPs to reference polymers and possible additives, considering a reasonably accurate match of approximately 80% for the studied MP samples. This study showcases the significant advantage of using shortwave infrared hyperspectral sensing for rapid identification of virgin and exposed MPs with a relatively large scan area after a simple sample preparation. This approach, combined with other complementary characterization techniques, shall provide highly throughput results for MPs identification. This research provides valuable insights into the features extracted from environmental MPs and establishes a foundation for improving their classification efficiency for environmental applications. [Display omitted] • Shortwave infrared hyperspectral sensing identifies microplastics in complex matrices. • Polypropylene and polyethylene were highly responsive to weathering treatment. • Acrylonitrile butadiene styrene and polystyrene exhibited significant digestion degradation. • Environmental MPs revealed alterations in the overtone of carbonyl and vinyl bands. [ABSTRACT FROM AUTHOR]

Microplastic is an emerging environmental pollutant with potential health risks. Recent studies have shown that microplastic could impair gut homeostasis in mammals. Although it has been widely demonstrated that gut dyshomeostasis could impact renal health through the gut-kidney axis, the effects of microplastic-induced gut dyshomeostasis on renal health and underlying mechanisms are still largely unknown. In the current work, we found that polystyrene microplastics (PS-MPs) treatment impaired the gut barrier, increased urinary complement-activated product C5a levels and renal C5aR expression, leading to chronic kidney disease-related symptoms in mice. Restoring the gut barrier using an antibiotic mixture effectively alleviated PS-MPs-induced kidney injury, indicating the involvement of the gut-kidney axis in PS-MPs-induced renal injury. Moreover, it also mitigated PS-MPs-induced alterations in urinary C5a levels and renal C5aR expression, suggesting that the renal C5a/C5aR pathway might be involved in PS-MPs' impacts on the gut-kidney axis. Further experiments using a C5aR inhibitor, PMX53, verified the vital role of renal C5a/C5aR pathway activation in the development of kidney injury induced by PS-MPs. Collectively, our results suggest that PS-MPs induce kidney injury in mice by impairing the gut barrier, increasing C5a levels, and ultimately activating the renal C5a/C5aR pathway, highlighting the crucial role of the gut-kidney axis in PS-MPs-induced kidney injury. [Display omitted] • Polystyrene microplastics (PS-MPs) induce chronic kidney disease (CKD) in mice. • PS-MPs have limited direct impacts on renal cell and complement system. • PS-MPs induce CKD via gut barrier dysfunction and renal C5a/C5aR pathway. • Gut-kidney axis plays a vital role in PS-MPs-induced kidney injury. [ABSTRACT FROM AUTHOR]

The widespread promotion attempt of biodegradable plastics is considered as an effective solution to address conventional plastic pollution. However, the interaction of microplastics (MPs) easily broken down from biodegradable plastics with the coexisting pollutants in aquatic environments has gained less attention. Herein, we investigated the effects of the aging process and environmental factors on copper (Cu(II)) adsorption behavior by biodegradable polylactic acid and conventional polystyrene MPs. Results demonstrated that the aging process significantly altered physicochemical properties of both types of MPs, and PLA showed less resistance to aging. The aged polylactic acid MPs (aged-PLA) exhibited the far highest Cu(II) maximum adsorption capacity (7.13 mg/g) mainly due to its abundant oxygen-containing functional groups (OCFGs), followed by pristine polylactic acid (PLA, 6.08 mg/g), aged polystyrene (aged-PS, 0.489 mg/g) and pristine polystyrene (PS, 0.365 mg/g). The adsorption kinetics of Cu(II) on PLA MPs were controlled by film and intraparticle diffusion, while film diffusion governed the Cu(II) adsorption onto PS MPs. In addition to roles of rougher surface structure, greater surface area and pore filling, the complexation of OCFGs and electrostatic interaction were critical to the adsorption mechanism of aged-PLA and aged-PS, and cation-π interaction was associated with adsorption of aged-PS. Moreover, the adsorption capacity of Cu(II) on aged MPs gradually grew with the increasing pH from 4 to 7. Besides, humic acid significantly promoted the adsorption of Cu(II) at a low concentration (0–20 mg/L) due to the formation of binary mixtures of MPs-HA but inhibited the adsorption at a high concentration (50 mg/L) because of its competitive effect, suggesting the dual roles of humic acid in the adsorption process. Overall, our findings provide a better understanding of the adsorption behavior of metals on biodegradable MPs and emphasize their non-negligible risk as carriers of contaminant. [Display omitted] • The OCFGs transformation of MPs during aging process was presented by 2D-FTIR-COS. • Aging process promoted adsorption performance of conventional and biodegradable MPs. • Maximum adsorption capacity of PLA to Cu(II) was an order of magnitude greater than PS. • Complexation of OCFGs played the crucial role in adsorption mechanism of PLA MPs. • HA had dual roles in Cu(II) adsorption by MPs with a concentration-dependent trend. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) are ubiquitous pollutants in marine environments. Among the many detrimental consequences of microplastic pollution, its consumption by marine biota is of particular relevance for human health, due to exposure through the food web. Long-term time-series biotic samples are overlooked sources of information for microplastics research. These collections are extremely valuable for the detection and monitoring of changes in marine environments. However, there are very few long-term studies (>10 years) of the uptake of microplastics by biota. Here, we used Dove Time Series planktonic samples (from 1971 to 2020) to assess the presence and prevalence of microplastics in the English North Sea coast over time. Fish and brachyuran larvae were selected due to their commercial importance and consequent implications for human health. A custom enzymatic digestion method was used to extract microplastics for FTIR-ATR polymer identification. An increasing cumulative trend in MP ingestion was identified. Cellophane and polyethylene terephthalate were the polymer types found most frequently in both taxa. Although a total higher microplastics uptake was observed in fish, consumption was not significantly different between taxa over time. Equally, results were not clearly related to microplastics shape or polymer type. This work did not find significant long-term evidence on the increasing uptake of microplastic particles by zooplankton over time. However, the results of this report identified additives, plasticisers, and other more complex and hazardous compounds that should not be released to the environment (e.g., bis-(2-hydroxyethyl) dimerate, propylene glycol ricinoleate) inside marine biota. The study detailed herein provides a case study for the use of long-term time-series in providing accurate assessments of microplastic pollution in marine biota. [Display omitted] • 1st study using a 50-year biotic long-term collection on microplastic (MPs) pollution. • Crab and fish larvae from 1971 to 2020 showed differential MPs uptake. • Fish larvae had a significantly higher total uptake of MPs than crab larvae. • Observed cumulative increase in MPs presence in the Northumberland coast in 50 years. • Polymers classified as hazardous found inside fish and brachyuran larvae. [ABSTRACT FROM AUTHOR]

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C–C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution. [Display omitted] • A comprehensive overview of the factors affecting plastic aging. • A comprehensive overview of microbial degradation of polystyrene. • Four processes of microbial degradation were identified. • A possible mechanism for biodegradable polystyrene is proposed. [ABSTRACT FROM AUTHOR]

Micro and nanoplastics (MNPLs) are emergent environmental pollutants, resulting from the degradation of plastic waste, requiring urgent information on their potential risks to human health. To determine such risks, reliable true-to-life materials are essential. In this work, we have used titanium-doped PET NPLs [PET(Ti)NPLs], obtained by grinding opaque milk polyethylene terephthalate (PET) bottles, as a true-to-life MNPLs model. These opaque PET bottles, with an average size of 112 nm, contain about 3% Ti in the form of titanium dioxide rod nanoparticles. TEM investigation confirmed the mixed Ti/PET nature of the obtained true-to-life NPLs, and the rod shape of the embedded TiO 2 NPs. In the in vivo Drosophila model neither PET(Ti)NPLs nor TiO 2 NPs reduced the survival rates, although their internalization was confirmed in different compartments of the larval body by using confocal and transmission electron microscopies. The presence of Ti in the PET(Ti)NPLs permitted to quantify its presence both in larvae (2.1 ± 2.2 μg/g of Ti) and in the resulting adults (3.4 ± 3.2 μg/g of Ti) after treatment with 500 μg/g food of PET(Ti)NPL, suggesting its potential use to track their fate in more complex organisms such as mammals. PET(Ti)NPLs, as well as TiO 2 NPs, altered the expression of genes driving different response pathways, inducing significant oxidative stress levels (up to 10 folds), and genotoxicity. This last result on the genotoxic effects is remarkable in the frame of the hot topic discussion on the risk that titanium compounds, used as food additives, may pose to humans. [Display omitted] • True-to-life titanium-doped nanoplastics from opaque PET plastic bottles were used. • Their potential health effects were evaluated in the in vivo Drosophila model. • PET(Ti)NPLs were able to cross the intestinal barriers and spread into the larval body. • The presence of Ti permits quantifying their presence in both larvae and adults. • Gene expression changes, oxidative stress, and genotoxicity were induced by PET(Ti)NPLs. [ABSTRACT FROM AUTHOR]

Residual plastic films in soils are posing a potential threat to agricultural ecosystem. However, little is known about the impacts of microplastics (MPs) derived from biodegradable and non-biodegradable plastic films on plant-soil systems. Here, we carried out a pot experiment using soil-cultivated lettuce treated by two types of MPs, degradable poly(butylene adipate- co -terephthalate) (PBAT-MPs) and non-biodegradable polyethylene (PE-MPs). MPs resulted in different degrees of reduction in shoot biomass, chlorophyll content, photosynthetic parameters, and leaf contents of nitrogen (N), phosphorus (P), and potassium (K), accelerated accumulation of hydrogen peroxide and superoxide, and increased malondialdehyde content in lettuce leaves. Moreover, MPs obviously decreased contents of total N, nitrate, ammonium, and available K in soils, and increased available P, thus altering soil nutrient availability. MPs also significantly decreased proportions of macroaggregates, and decreased soil electrical conductivity and microbial activity. PBAT-MPs had significantly greater impacts on oxidative damage, photosynthetic rate, soil aggregation, microbial activity, and soil ammonium than those of PE-MPs. Our results suggested that MPs caused oxidative damages, nutrient uptake inhibition, soil properties alteration, ultimately leading to growth reduction, and PBAT-MPs exhibited stronger impacts. Therefore, it is urgent to further study the ecological effects of MPs, especially biodegradable MPs, on soil-plant systems. [Display omitted] • PBAT and PE microplastics (MPs) showed inhibitory impacts on shoot growth of lettuce. • Oxidative damages and nutrient uptake contributed to reductions in chlorophyll and photosynthesis. • MPs altered soil nutrient availability by affecting aggregation and microbial activity. • Toxic impacts of PBAT-MPs on lettuce growth were stronger than those of PE-MPs. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) have been found in virtually every environment on earth and become a source of pollution around the world. The toxicology of microplastics on immunity is an emerging area of research, and more studies are needed to fully understand the effects of microplastics exposure on animal health. Therefore, we tried to determine the immunotoxic effects of microplastics on avian spleen by using an animal model- Japanese quail (Coturnix japonica). One-week chicks were exposed to environmentally relevant concentrations of 0.02 mg/kg, 0.4 mg/kg and 8 mg/kg polystyrene microplastics in the feed for 5 weeks. The results demonstrated that microplastics induced microstructural injuries featured by cell disarrangement and vacuolation indicating splenic inflammation. Ultrastructural damages including membrane lysis and mitochondrial vacuolation also suggested inflammatory responses in the spleen by microplastics exposure. Meanwhile, increasing reactive oxygen species (ROS) and Malondialdehyde (MDA) while the inactivation of superoxide dismutase (SOD), catalase (CAT) and glutathione S-transferase (GST) indicated oxidative stress in the spleen. Moreover, the increasing level of proinflammatory cytokines including Tumor necrosis factor alpha (TNF-α), interferon gamma (IFN-γ), interleukin-1β (IL-1β), interleukin-6 (IL-6) and decreasing level of anti-inflammatory cytokine interleukin-10 (IL-10) implied splenic inflammation. Furthermore, transcriptomic analysis showed that microplastics induced inflammatory responses in the spleen through p38 mitogen-activated protein kinases (p38 MAPK) pathway activation and tumor necrosis factor (TNF) signaling stimulation. The signaling stimulation also aggravated cell apoptosis in the spleen. The present study may benefit to understand potential mechanisms of developmental immunotoxicology of microplastics. [Display omitted] • Microplastics induced histopathological injury in the spleen of Japanese quails. • Microplastics caused oxidative stress and cell apoptosis in the spleen. • Microplastics led to splenic inflammation through p38 MAPK pathway activation. • Microplastics induced inflammatory responses by TNF signaling stimulation. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) have attracted tremendous attention due to their widespread appearance in the environment and biota, and their adverse effects on organisms. Since plastics are substantially produced to meet human needs, primary and secondary MPs are extensively trapped in wastewater treatment plants, freshwater, drinking water, ocean, air, and soil. The serious MPs pollution calls for efficient treatment strategies Herein, we discuss three catalytic processes (photocatalysis, electrocatalysis, and biocatalysis) for the sustainable management of MPs, and the relevant catalytic mechanisms are clarified. For photocatalysis, three categories (organic, inorganic, hybrid) of photocatalysts are listed, with degradation efficiency of 23%–100%. Next, relative impact factors on photocatalysis, such as characteristics of MPs and photocatalysts, are discussed. Then, some promising electrocatalysts for the degradation/conversion of (micro)plastics and standard electrolyzer designs are briefly introduced. This electrocatalytic method has achieved over 77% of Faradaic efficiency. Next, potential organisms with abundant biocatalysts for degrading different types of MPs are reviewed. Advances in three bioremediation techniques including biositimulation, bioaugmentation, and biosurfactant are outlined. Lastly, perspectives are put forward to promote scientific development in solving environmental issues on MPs pollution in broad fields. This paper provides insights into the development of next-generation techniques for MPs pollution management in a sustainable manner. [Display omitted] • Mechanisms of MPs photo/electro/biocatalytic degradation are explained. • Current developments states of photo/electrocatalysts are illustrated. • The potential of microorganisms for enzymatic removing MPs is discussed. [ABSTRACT FROM AUTHOR]

Microplastic pollution has been confirmed in all marine compartments. However, information on the sub-surface microplastics (MPs) abundance is still limited. The vertical distribution of MPs can be influenced by water column stratification due to water masses of contrasting density. In this study, we investigated the vertical distribution of MPs in relation to the water column structure at nine sites in the Kattegat/Skagerrak (Denmark) in October 2020.A CTD was used to determine the stratification and pycnocline depth before sampling. Plastic-free pump-filter sampling devices were used to collect MPs from water samples (1–3 m3) at different depths. MPs concentration (MPs m−3) ranged from 18 to 87 MP m−3 (Median: 40 MP m−3; n = 9) in surface waters. In the mid waters, concentrations ranged from 16 to 157 MP m−3 (Median: 31 MP m−3; n = 6), while at deeper depths, concentrations ranged from 13 to 95 MP m−3 (Median: 34 MP m−3; n = 9). There was no significant difference in the concentration of MPs between depths. Regardless of the depth, polyester (47%), polypropylene (24%), polyethylene (10%), and polystyrene (9%) were the dominating polymers. Approximately 94% of the MPs fell within the size range of 11–300 μm across all depths. High-density polymers accounted for 68% of the MPs, while low-density polymers accounted for 32% at all depths. Overall, our results show that MPs are ubiquitous in the water column from surface to deep waters; we did not find any impact of water density on the depth distribution of MPs despite the strong water stratification in the Kattegat/Skagerrak. [Display omitted] • Microplastics (MPs) were ubiquitous in the water column of the Kattegat/Skagerrak. • The median concentration of MPs in the water column was 35 MPs m−3. • Small MPs (<100 μm) of high-density polymers were dominant in the water column. • No significant difference in MPs concentration among water layers was found. [ABSTRACT FROM AUTHOR]

Increasing pollution of microplastics (MPs) and nanoplastics (NPs) has caused widespread concern worldwide. Extracellular polymeric substances (EPS) are natural organic polymers mainly produced by microorganisms, the major components of which are polysaccharides and proteins. This review focuses on the interactions that occur between EPS and MPs/NPs in the water environment and evaluates the effects of these interactions on the behaviors of MPs/NPs. EPS-driven formation of eco-corona, biofilm, and "marine snow" can incorporate MPs and NPs into sinking aggregates, resulting in the export of MPs/NPs from the upper water column. EPS coating greatly enhances the adsorption of metals and organic pollutants by MPs due to the larger specific surface area and the abundance of functional groups such as carboxyl, hydroxyl and amide groups. EPS can weaken the physical properties of MPs. Through the synergistic action of different extracellular enzymes, MPs may be decomposed into oligomers and monomers that can enter microbial cells for further mineralization. This review contributes to a comprehensive understanding of the dynamics of MPs and NPs in the water environment and the associated ecological risks. [Display omitted] • Extracellular polymeric substances (EPS) affect micro/nano-plastics (MPs/NPs). • EPS incorporate MPs/NPs into sinking aggregates by multiple forces. • EPS promote the adsorption of other pollutants onto MPs via functional groups. • EPS increase MP biodegradation by the synergistic actions of multiple exoenzymes. [ABSTRACT FROM AUTHOR]

The use of bioretention cells as a stormwater control measure allows stormwater runoff to be collected and filtered, effectively removing microplastics and other pollutants from stormwater. This study investigated the effect of polyethylene microplastics (PE-MPs) retention on the bioretention cell, in terms of denitrification performance and microbial community structure. Four PE-MP exposures were compared at different concentrations of 0, 250, 500 and 1000 mg/L under alternating dry and wet period conditions. Results showed that the removal efficiency reduced by 14.99%, 28.37% and 18.59% with PE-MP concentrations of 250, 500 and 1000 mg/L. The NO 3 −-N removal efficiency increased by 36.19%, 20.19% and 35.39%. After 8 days of dry conditions, the NO 3 −-N removal efficiencies of the bioretention cells were reduced by 36.66%, 46.86% and 31.11% compared to those after 2 days of dry conditions. Microbial sequencing results indicated that the accumulation of PE-MPs changed the microbial community structure within the bioretention cell filler material, promoting the growth of bacteria such as Actinobacteria, Bacteroidetes and Firmicutes. Furthermore, PE-MPs reduced the relative abundance of nitrifying bacteria (e.g. Nitrospira) within the bioretention cell and promoted denitrifying bacteria (e.g. Dechloromonas and Hydrogenophaga), along with numerous other genera such as Azotobacter and Nocardia. [Display omitted] • The PE microplastics altered the denitrification performance of bioretention cells. • High microplastics concentration stress inhibits nitrification and promotes denitrification. • Microplastics mitigated the negative effects of dry period on nitrogen removal in bioretention cells. • The PE microplastics altered the bacterial community in bioretention cell fillers. [ABSTRACT FROM AUTHOR]