Search

This study was conducted to assess sediment trace metals (Cd, Cr, Cu, Pb, Ni and Zn) contamination using a systematic approach by collecting sediment samples from 8 transects along the Dubai coastline, each 10 km long, and each transect included its nearshore sediment sampling station. Additionally, 10 sediment samples were collected from the Dubai creek and other potential sources of metal pollution. The sediment samples were collected in December and again in August. However, no significant difference in sediment metal concentration was found between the two sampling campaigns. The sediment trace metal concentrations (0.92-1.31 mg Cd/kg, 2.82-176.6 mg Cr/kg, 2.27-621.67 mg Cu/kg, 0.88-23.6 mg Pb/kg, 1.92-192.2 mg Ni/kg and 9.1-391.05 mg Zn/kg) showed considerable variability, except for Cd (1.08 ± 0.06 mg/kg, 5.55% variability). Despite this, no significant differences in sediment metal concentrations were found between the sampled transects. However, significant variations in Cr, Cu, Pb and Zn were evident between distances from the shoreline to offshore stations along the Dubai coast, and the nearshore locations presented clear evidence of elevated/maximum sediment metal concentrations. Most of the sediment trace metal concentrations, however, were found well within the sediment quality guidelines (SQGs) for nearshore sediments. Trace metal contamination hotspots, nonetheless, were identified at some nearshore stations as determined by metal level exceedance over the SQGs, background levels and the pollution load index, with limited potential ecological risk. Overall, the findings suggest that sediments in the Dubai coastal environment are mainly influenced by anthropogenic activities in stations located in the proximity of ship maintenance, ports, and industrial areas such as Dry Dock, Jaddaf, Jebel Ali Port, Wharfage, Hamriya and DUBAL., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The paper presents a novel technique for quantifying trace metals in aerosol samples in real time. Airborne metals were continuously collected for one week near the Baltic Sea in Finland using a particle-into-liquid sampler (PILS). The collected liquid samples were analyzed for metals using micro-discharge optical emission spectroscopy (µDOES). The micro-discharge analyzer is designed to perform real-time, on-site measurements of metal concentrations in aqueous solutions. Currently, µDOES can provide online measurements of 30 metals, with typical detection limits from 0.01 µg/m 3 to 0.06 µg/m 3 with a long-term repeatability less than 5%. The novelty of this analyzer lies in its compact design, rapid detection capabilities, and ease of operation and maintenance. Several metals, including potassium (K), calcium (Ca), sodium (Na), aluminum (Al), magnesium (Mg), and copper (Cu), were measured in the aerosol samples collected using PILS. The results indicate that this approach has significant potential for future automated online monitoring of airborne metal concentrations, facilitating investigations into their sources and daily variations. The development of real-time technologies for rapid, online, and accurate atmospheric aerosol measurements is essential for advancing climate change research. Such advancements allowing for continuous real-time data enhance our understanding of aerosol dynamics, improve source identification, and inform public health and environmental policies, ultimately contributing to more effective climate change monitoring and mitigation., (© 2024. The Author(s).)

This research examines the contamination levels in the Pashur River in Bangladesh stemming from trace metal discharge originating from the Mongla seaport and various industrial outlets. It delves into both ecological risks and potential health hazards for humans consuming fish carrying accumulated trace metals. The research employed atomic absorption spectrometry to measure the concentrations of chromium (Cr), arsenic (As), manganese (Mn), copper (Cu), zinc (Zn), nickel (Ni), lead (Pb), and cadmium (Cd) in surface water, sediment, and fish samples. Target hazard quotient (THQ) and carcinogenic risks were calculated to determine the human health risk caused by the consumption of these targeted fish species. An R I value of 42.89 indicates that the collective presence of trace metals in sediment poses significant ecological risks to the study area. Although the majority of trace metals present in sediment are categorized under class 1 (ranging from unpolluted to moderately polluted) based on the I geo values, Cd is classified under class 2, signifying a moderate level of pollution. Significantly, THQ values surpass the threshold of 1 for Cr and As, indicating potential health risks associated with the consumption of specific fish species. Among the trace metals analyzed, Ni demonstrates the highest cancer risk (CR) value, at 5.78 × 10 3 , indicating a notable cancer risk associated with the consumption of targeted fish. Recommendations include the strict enforcement of waste disposal policies to mitigate anthropogenic discharge and safeguard the river from further pollution., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

This study evaluates the sustainability of spreading wastewater or sewage sludge on agricultural land, balancing benefits with contamination risks. Conventional ecological risk indices often fail to address the long-term accumulation of metals in soils. We investigate the feasibility of spreading based on current knowledge of potentially contaminating metals and their behavior in soil. We analyzed the speciation of metals (Ag, Cd, Co, Cr, Cu, Ni, Pb, Ti, Zn) through sequential extraction in sludge, treated wastewater, and soils after 14 years of application of sewage sludge and treated wastewater issued from an Algerian wastewater treatment plant. We introduce a Time to Critical Content Index (TCCI) that calculates the time required to reach critical levels of potentially mobile metals, considering total metal content and speciation. The TCCI takes into account product knowledge, soil characteristics, metal behavior, ecological/toxicological thresholds, and regulations. Applied to our case study, the TCCI indicates that spreading sewage sludge can continue despite metal contents exceeding regulatory ceiling values. The index serves as a precautionary measure, adaptable to evolving knowledge, providing a comprehensive framework for sustainable agricultural practices., (© 2024. The Author(s).)

Metal contamination is a crucial environmental issue because of its persistence and toxicity, which can have deleterious effects on aquatic ecosystems. Coastal sediments serve as reservoirs for metals. Aquaculture is an important human activity in coastal areas; however, the actual status of metal distribution in these areas has not been well characterized. We investigated the distribution and geochemical speciation of metals in the sediments of the Japanese aquaculture areas of Shidugawa and Furue Bays. Total metals were generally in the order Zn > Cu > Ni > Cd > Pb and occurred at high levels at the sites in the inner parts and near the fish cages in the sampling areas. Pearson's correlations and principal component analysis results suggested that the metals in these aquaculture areas might originate from several sources, such as fish feces, fish feeds, corrosion of antifouling material residues, and local anthropogenic activities, including fertilizers and manures. Furthermore, metals were mainly in silts and fine sediments, associated with residual speciation, followed by organic fractions, oxides, and high fractions of exchangeable Cd. These results provide important insights into the accumulation of metals in sediments for better managing marine aquaculture in Japan., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Marginalized communities experience barriers that can prevent soil monitoring efforts and knowledge transfer. To address this challenge, this study compared two analytical methods: portable X-ray fluorescence spectroscopy (pXRF, less time, cost) and inductively coupled plasma mass spectrometry (ICP-MS, "gold standard"). Surface soil samples were collected from residential sites in Arizona, USA (N = 124) and public areas in Troy, New York, USA (N = 33). Soil preparation differed between groups to account for community practice. Statistical calculations were conducted, paired t test, Bland-Altman plot, and a two-way ANOVA indicated no significant difference for As, Ba, Ca, Cu, Mn, Pb, and Zn concentrations except for Ba in the t test. Iron, Ni, Cr, and K were statistically different for Arizona soils and V, Ni, Fe, and Al concentrations were statistically different for New York soils. Zinc was the only element with high R 2 and low p value. Pollution load index (PLI), enrichment factors (EF), and geo-accumulation index (I geo ) were calculated for both methods using U.S. Geological Survey data. The PLI were > 1, indicating soil pollution in the two states. Between pXRF and ICP-MS, the I geo and EF in Arizona had similar degree of contamination for most elements except Zn in garden and Pb in yard, respectively. For New York, the I geo of As, Cu, and Zn differed by only one classification index between the two methods. The pXRF was reliable in determining As, Ba, Ca, Cu, Mn, Pb, and Zn in impacted communities. Therefore, the pXRF can be a cost-effective alternative to using ICP-MS techniques to screen soil samples for several environmentally relevant contaminants to protect environmental public health., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Metal uptake by vegetables is becoming a threat to the life of consumers. Therefore, continuous monitoring of metals in vegetables and soils is becoming a necessity. In this study, the occurrence of 18 metals in amadumbe (Colocasia esculenta L.), sweet potatoes (Ipomoea batatas L.), potatoes (Solanum tuberosum L.), and carrots (Daucus carrota L.) grown in small-scale South African agricultural farms was monitored using inductively coupled plasma-optical emission spectroscopy. All the 18 investigated elements were detected in soils and different vegetative plants parts. Bioaccumulation factors indicated the transfer of selected metals from soils into the plant roots. Toxic metals Cd, Cr, and Pb had their concentrations exceeding the maximum permissible levels set by the World Health Organization in the edible parts of all root vegetables. Cd and Pb varied between 18.89 and 19.19 mg kg -1 and 10.46 and 11.46 mg kg -1 , respectively, while Cr remained constant at 16.78 mg kg -1 . The exact metals together with As and Ni had their total hazard quotients exceeding the threshold value of 1, which indicated that the daily consumption of the investigated root vegetables is likely to pose health risks to both adults and children. Therefore, this study points out to a possibility of toxic health effects that could arise when these vegetables are consumed daily., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Fish is among the most affordable and readily available protein sources for communities residing near water bodies. However, the recent pollution status of aquatic ecosystems has rendered fish consumption risky for human health. The study evaluated metal levels in the liver, gill, and muscle tissues of Redbreast tilapia (Coptodon rendalli) from Inanda and Nagle dams in the uMgeni River system. Metals, Al, Sb, Cd, Cr, Fe, Mn, Mo, Pb, and Zn were analysed using ICP-OES. Fish size showed no significant difference between the two dams (p > 0.05) whereas a descending trend liver > gill > muscle was observed for most metal levels at both dams. Moreover, there was a clear separation for metal levels in the liver, gill, and muscle between the two dams (p < 0.001) and a similar trend was observed for organs in each dam (p < 0.001). No relationship was observed between fish length and metal levels and no definite trend was observed for inter-metal relationships. Antimony, Cr, and Pb showed THQs greater than 1 at both dams which suggests health risks for consumers. Molybdenum has also shown a concerning THQs with some individuals exhibiting values ranging from 0.5 - 0.9. These findings suggest that consuming C. rendalli from the Inanda and Nagle dams could result in adverse health effects from Sb, Cr and Pb., (© 2024. The Author(s).)

Fluvial sediment analysis and water quality assessment are useful to identify anthropic and natural sources of pollution in rivers. Currently, there is a lack of information about water quality in the Pixquiac basin (Veracruz state, Mexico), and this scarcity of data prevents authorities to take adequate measures to protect water resources. The basin is a crucial territory for Xalapa, the capital city of Veracruz state, as it gets 39% of its drinkable water from it. This research analyzed 10 physicochemical parameters and 12 metal concentrations in various rivers and sources during two seasons. Dissolved metals presented average concentrations (µg/L): Al (456.25) > Fe (199.4) > Mn (16.86) > Ba (13.8) > Zn (7.6) > Cu (1.03) > Pb (0.27) > As (0.12) > Ni (0.118) (Cd, Cr and Hg undetectable). Metals in sediment recorded average concentrations (ppm): Fe (38575) > Al (38425) > Mn (460) > Ba (206.2) > Zn (65.1) > Cr (29.8) > Ni (20.9) > Cu (16.4) > Pb (4.8) > As (2.1) (Cd and Hg undetectable). During the rainy season, Water Quality Index (WAWQI) classified stations P17 and P18's water as "unsuitable for drinking" with values of 110.4 and 117.6. Enrichment factor (EF) recorded a "moderate enrichment" of Pb in sediment in P24. Pollution was mainly explained by wastewater discharges in rivers but also because of erosion and rainfall events. Statistical analysis presented strong relationships between trace and major metals which could explain a common natural origin for metals in water and sediment: rock lixiviation., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The health risks associated with the consumption of staples cultivated in the subsistence food gardens along the Watut River were investigated in Papua New Guinea. Twenty soil samples and twenty-nine samples of staple foods (including banana, taro, sweet potato, and Singapore taro) were collected from the food gardens following a three-day dietary recall survey. The concentration of metals (Cr, Cu, Pb, and Ni) was analyzed in the soil and food samples using Inductively Coupled Plasma Optical Emission Spectrophotometer. The descending order of mean metal concentration in the food garden soils is as follows: Cr > Cu > Ni > Pb. The concentration of Pb in all samples and Cr in 97% of staple foods exceeded the FAO/WHO permissible limits. Approximately 87% of adult consumers of bananas (Musa sp) were found to have estimated Cr and Pb ingestion levels exceeding the permissible daily tolerable intake of metals (0.2 and 0.21 mg day -1 , respectively). Hazard index values from the staples analysis indicate that the consumption of bananas (9.40) poses the highest risk of non-carcinogenic effects on adults, followed by taro (7.32), sweet potato (6.13), and Singapore taro (4.30). The consumption of taro is dangerous due to cancer risk associated with the intake of excessive Ni (2.88E-02) and Cr (8.82E-03) in adults and children compared to banana, sweet potato, and Singapore taro. Non-carcinogenic hazards of metal ingestion were found to be pronounced in the younger population, while carcinogenic effects were more serious in adults. Urgent measures must be implemented to protect communities, especially children, from the dangerous effects of heavy metal ingestion through staples in the lower Watut region., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

This study investigated the impact of micropollutants on fish health from Segredo hydroelectric reservoir (HRS) along the Iguaçu River, Southern Brazil, contaminated by urban, industrial, and agricultural activities. This is the first comprehensive study assessment in the river after the severe drought in the 2020s in three fish species from different trophic levels Astyanax spp. (water column depth/omnivorous), Hypostomus commersoni (demersal/herbivorous), and Pimelodus maculatus (demersal/omnivorous). Animals, water, and sediment samples were collected from three distinct sites within the reservoir: Floresta (upstream), Iratim (middle), and Station (downstream). The chemical analysis revealed elevated concentrations of metals (Al, Cu, Fe) and the metalloid As in water, or Cu, Zn, and As in sediment, surpassing Brazilian regulatory limits, while the organic pollutants as DDT, PAHs, PCBs, and PBDEs were found under the Brazilian regulatory limits. The metal bioaccumulation was higher in gills with no significant differences among sites. The species Astyanax spp. and H. commersoni displayed variations in hepatosomatic index (HSI) and P. maculatus in the condition factor index (K) between sites, while adverse effects due to micropollutants bioaccumulation were observed by biochemical, genotoxic, and histopathological biomarkers. The principal component analysis and integrated biomarker response highlighted the upstream site Floresta as particularly inhospitable for biota, with distinctions based on trophic level. Consequently, this multifaceted approach, encompassing both fish biomarkers and chemical analyses, furnishes valuable insights into the potential toxic repercussions of micropollutant exposure. These findings offer crucial data for guiding management and conservation endeavors in the Iguaçu River., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Primary production is an important driver of marine carbon storage. Besides the major nutrient elements nitrogen, phosphorus, and silicon, primary production also depends on the availability of nutrient-type metals (e.g., Cu, Fe, Mo) and the absence of toxicologically relevant metals (e.g., Ni, Pb). Especially in coastal oceans, carbon storage and export to the open ocean is highly variable and influenced by anthropogenic eutrophication and pollution. To model future changes in coastal carbon storage processes, a solid baseline of nutrient and metal concentrations is crucial. The North Sea is an important shelf sea, influenced by riverine, atmospheric, Baltic Sea, and North Atlantic inputs. We measured the concentrations of dissolved nutrients (NH 4 + , NO 3 - , PO 4 3- , and SiO 4 4- ) and 26 metals in 337 water samples from various depths within the entire North Sea and Skagerrak. A principal component analysis enabled us to categorize the analytes into three groups according to their predominant behavior: tracers for seawater (e.g., Mo, U, V), recycling (e.g., NO 3 - , PO 4 3- , SiO 4 4- ), and riverine or anthropogenic input (e.g., Ni, Cu, Gd). The results further indicate an increasing P-limitation and increasing anthropogenic gadolinium input into the German Bight., (© 2024. The Author(s).)

Trace metal soil contamination poses significant risks to human health and ecosystems, necessitating thorough investigation and management strategies. Researchers have increasingly utilized advanced techniques like remote sensing (RS), geographic information systems (GIS), geostatistical analysis, and multivariate analysis to address this issue. RS tools play a crucial role in collecting spectral data aiding in the analysis of trace metal distribution in soil. Spectroscopy offers an effective understanding of environmental contamination by analyzing trace metal distribution in soil. The spatial distribution of trace metals in soil has been a key focus of these studies, with factors influencing this distribution identified as soil type, pH levels, organic matter content, land use patterns, and concentrations of trace metals. While progress has been made, further research is needed to fully recognize the potential of integrated geospatial imaging spectroscopy and multivariate statistical analysis for assessing trace metal distribution in soils. Future directions include mapping multivariate results in GIS, identifying specific anthropogenic sources, analyzing temporal trends, and exploring alternative multivariate analysis tools. In conclusion, this review highlights the significance of integrated GIS and multivariate analysis in addressing trace metal contamination in soils, advocating for continued research to enhance assessment and management strategies., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

When soils available for the construction of liners do not display the characteristics necessary for a good performance, mixtures with other materials can be employed for achieving the desired quality. Several researchers have addressed those mixtures from either a geotechnical or a gas diffusion perspective, emphasizing low hydraulic conductivity. However, in recent years, growing attention has been drawn to the ability of liners to mitigate contamination. The literature lacks studies on the use of amendments for soil liners or cover systems to retain potentially toxic metals, which are important inorganic contaminants. This paper provides a systematic review of the literature considering publications available on Web of Science and SpringerLink databases between January 1st, 2012, and December 5th, 2022. The aim of the review was to identify the types of soils and amendments studied as liners or cover systems for such retention of potentially toxic metals, the methodologies of application of the alternative materials in the soils, and the research gaps and perspectives in the field. Seventeen papers that addressed 31 materials as amendments were retrieved. The most studied amendment was coal fly ash, and 17 amendments were residues or by-products, which indicates concerns over waste destination and sustainability. Among the potentially toxic metals analyzed are Pb, Cu, and Cd. Gaps such as lack of pilot, field-scale, and long-term studies, as well as perspectives for future research (e.g., different liner configurations, concomitant mixtures of two or more materials in the soil, and focus on the sustainability of amendments), were identified., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Airborne metals and organic pollutants are linked to severe human health impacts, i.e. affecting the nervous system and being associated with cancer. Airborne metals and polycyclic aromatic hydrocarbons (PAHs) in urban environments are derived from diverse sources, including combustion and industrial and vehicular emissions, posing a threat to air quality and subsequently human health. A lichen biomonitoring approach was used to assess spatial variability of airborne metals and PAHs, identify potential pollution sources and assess human health risks across the City of Manchester (UK). Metal concentrations recorded in lichen samples were highest within the city centre area and along the major road network, and lichen PAH profiles were dominated by 4-ring PAHs (189.82 ng g -1 in Xanthoria parietina), with 5- and 6-ring PAHs also contributing to the overall PAH profile. Cluster analysis and pollution index factor (PIF) calculations for lichen-derived metal concentrations suggested deteriorated air quality being primarily linked to vehicular emissions. Comparably, PAH diagnostic ratios identified vehicular sources as a primary cause of PAH pollution across Manchester. However, local more complex sources (e.g. industrial emissions) were further identified. Human health risk assessment found a "moderate" risk for adults and children by airborne potential harmful element (PHEs) concentrations, whereas PAH exposure in Manchester is potentially linked to 1455 (ILCR = 1.45 × 10 -3 ) cancer cases (in 1,000,000). Findings of this study indicate that an easy-to-use lichen biomonitoring approach can aid to identify hotspots of impaired air quality and potential human health impacts by airborne metals and PAHs across an urban environment, particularly at locations that are not continuously covered by (non-)automated air quality measurement programmes., (© 2024. The Author(s).)

In November 2015, the Fundão Dam break released millions of tons of metal-rich tailings into the Doce River Basin (DRB), causing catastrophic damage and potential ecological effects that reached the Atlantic Ocean. This study aimed to evaluate the geochemistry and toxicity of water and sediments collected in the DRB from 2015 to 2019 and to determine the spatial and temporal trends. Water and sediment samples were analyzed for metals and As by inductively coupled plasma optical emission spectrometry (ICP-OES), and acute toxicity for Daphnia similis or D. magna. Results were explored using geochemical indices and correlation analyzes. Overall, higher concentrations of metals and As in water and sediments were observed immediately after dam breakage, but the levels exhibited a decreasing trend over time, although the levels of some elements such as As and Mn remained high in the upper DRB. The geochemical indices indicated mostly low to moderate contamination, and the enrichment factor (EF) demonstrated a higher enrichment of Mn in the upper DRB. Acute toxicity to water fleas (D. similis and D. magna) was occasionally observed in waters and sediments, but the reference samples were toxic, and the short-term effects were not correlated with metals and As. Overall, the results showed limited bioavailability of metals and As and a decreasing trend in their concentrations, indicating an ongoing recovery process in DRB. These results are important to decision-making regarding the disaster and actions for environmental restoration., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The entire ecology is contaminated by the synthetic dyes that are widely utilised in the textile industries. They can be handled using a variety of technologies, but an eco-friendly method called electrocoagulation has been used to prevent additional contamination. Textile wastewater containing disperse dyes are successfully treated in Electrocoagulation (EC) utilizing Al, Fe, and Stainless Steel (SS), but it is not cost effective, also the treated water contains certain mg/L of the metals used, along with dye components, which obstructs the reuse of the same. The effects of initial pH, applied voltage, dye concentration, supporting electrolyte, and treatment time on the colour removal efficiency (CRE) and consumption of energy were examined in EC process followed by activated charcoal filtration (hybrid process) with a monopolar Ti/Ti electrode on the remediation of aqueous solution of Dispersive Blue-79 (dye 3G). The maximum CREobtained was 99.4%, chemical oxygen demand (COD) 93%, and biological oxygen demand (BOD) 85%, under the following optimized operating conditions, applied voltage 15 V, pH = 7, concentration of dye, electrolyte 110 mg/L, 0.2 g/L and time = 15 min. The overall operating cost for the treatment of aqueous dye 3G was 0.455US/m 3 . The mechanism of EC was studied using XPS analysis in the sludge obtained. For the purpose of the reuse, FTIR, AAS, and ICP-OES analysis were done and compared with the aqueous dye 3G, after EC and hybrid process to ensure the maximum removal of the degraded dye components and metal. ICP-OES results showed that there were no traces of metal in the treated aqueous dye 3G using this method. Throughout the study, the experimental outcomes indicated that the hybrid process upgraded the quality of the treated aqueous dye 3G., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The extent of aquatic pollution of Karachi Port Trust (KPT) coastal area located at the south of Pakistan coast has increased considerably in the last few decades due to unrestricted discharge of sanitary waste. The current study lays emphasis on the identification of vulnerable zones severely impacted by pollution in the KPT coastal area using laboratory monitoring, geospatial techniques, and statistical analysis. During 2019, sampling was conducted along the KPT coastal area, and 54 samples of seawater were collected during pre- and post-monsoon seasons. The outcomes of physical and chemical analysis revealed that the concentrations of BOD (biochemical oxygen demand), COD (chemical oxygen demand), nitrate, phosphate, phenol, cyanide, and oil and grease frequently exceeded the permitted limit of international norms and reached much greater levels. The levels of perilous metals in the seawater samples were in the order Ni>Cr>Cu>Pb>Cd>As in both phases and also reached to elevated levels as a consequence of the indiscriminate discharge of untreated industrial and domestic wastewater. Based on detailed examination during pre- and post-monsoon, six sites near KPT, Lyari River outfall, and Karachi Harbour were identified as highly polluted zones due to heavy discharge of sanitary effluents at these sites. In particular, the industrial zones present in the formal and informal sectors of Karachi are responsible for the deterioration of the KPT coastal area. Therefore, it is advised to design and build a submerged drainage system to transport and distribute massive amounts of treated municipal and industrial waste to the deep open sea in order to minimize the high pollutant levels in these locations., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Knowledge of dietary intakes of essential elements in groundwater is important for proper assessment of the actual contribution of drinking water to daily nutrient requirements. This study assessed the daily intake of nutritional elements in drinking groundwater of Lagos and Ogun States of Nigeria. One hundred and seventy (170) water samples were collected and analyzed for thirteen (13) nutritional elements (K, Mg, Ca, Co, Fe, Cu, Zn, Mo, Se, Na, Mn, Cr, and I) by Inductively Coupled Plasma-Mass Spectrometry (ICP/MS). Chronic daily intake CDI of the nutritional elements was higher for children and infants than adults in all cases. Percentages of tolerable daily intake reference value (TIRV) obtained for Lagos State groundwater were Mg 0.425%, Ca 0.309%, Fe 14.0%, Cu 1.84%, Zn 6.25%, Mo 0.057%, and Mn 1.08%; for Ogun State groundwater, % TIRV were Mg 1.99%, Ca 0.586%, Fe 81.1%, Cu 2.12%, Zn 9.21%, Mo 1.16%, and Mn 0.023%. The order of dermal absorption by an adult in Lagos when the water is used for bathing daily was Cr > Mn > Fe > Zn > Cu while the order in Ogun was Fe > Mn > Zn > Cu > Cr. The research concluded that groundwater alone cannot provide enough essential elements for human dietary needs in the study area., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Ranchi is the administrative capital of Jharkhand and is located in the southern part of the Chhotanagpur Plateau. It is rich in forest and mineral resources and hence is suitable for the establishment of many large- and small-scale industries. The estimated population of Ranchi for the year 2023 is 3.54 million. These demographic characteristics make the capital more vulnerable to environmental degradation. Also, previous water quality research focused on river, water, and oceans separately; however, little or no work has been carried out on the comparison of metal or metalloid analysis in rivers, waterfalls, and lakes. Hence, the present study aims to assess the pollution status of mineral-rich and industrial hub city, Ranchi, through analysis of metals or metalloids in abiotic (water and sediment) and biotic (fish and human) components. The water, sediment, and fish (Labeo rohita and Catla catla) samples were collected from Subarnarekha river, Jumar river, Dassam fall, Getalsud dam, Hundru fall, Jonha fall, Kanke dam, and Sita fall. Samples were collected following standard methods and analyzed in inductively coupled plasma mass spectrometry (ICP-MS). Among three aquatic systems (rivers, dams, and falls), dams were highly polluted with metals or metalloids, which may be due to effluent discharge from different industries. Additionally, the high population in the city also contributed to metals or metalloids pollution. The reason may be the direct sewage disposal and agricultural and surface runoff in the water systems. It was observed that most of the aquatic systems in Ranchi were severely polluted with metals or metalloids. The fish also accumulated these metals or metalloids in their body and can be life-threatening to the human population consuming them. The THQ (above 1) and HI (2.95) values for As showed that children are more vulnerable to health risk through consumption of contaminated fish. Hence, proper planning and management are needed to overcome the metals or metalloids pollution in Ranchi., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Land elevation exerts a significant influence on soil fertility through affecting macro and micro climatic conditions and geomorphological processes. To evaluate the soil fertility at different elevation classes, namely 1600-2000, 2000-2400, 2400-2800, and > 2800 m, 350 surface soil samples (0-30 cm) were collected from the agricultural lands of northwestern Iran. Soil properties, including soil texture, calcium carbonate (CaCO 3 ), pH, electrical conductivity (EC), organic matter (OM), and soil macronutrients (TN, P, and K) and micronutrients (Fe, Mn, Zn, and Cu), were measured. Finally, the interpretation and classification of the soil samples were made using the nutritional value index (NIV). The comparison of the NIV index based on elevation changes showed that the Gomez method classifies the soil properties in an optimal order as evidenced by its tendency towards the center of the data. However, the Common method is more consistent with the observed trend. After classifying the NIV index using the Common method, it was determined that CaCO 3 and soil salinity are not the limiting factor for soil fertility in different elevation classes. However, in all elevations, high pH, low OM at elevations > 2800 m, total nitrogen (TN), available phosphorous (AP), and micronutrients deficiencies, except Zn at the elevation of 1600-2000 m, are the main limiting factors for soil fertility of agricultural lands. The results provide further insight into the elevation-based land evaluation and may supports grower's decision on nutrient management and crop selection strategies., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Mining generates large quantities of mineral processing wastes that are typically stored in mine tailings (MT) ponds. Long-term exposure of the surrounding areas to the material from the tailings ponds has been reported to have adverse effects on both human health and the environment. The purpose of this study was to evaluate the ability of Atriplex atacamensis Phil. to phytostabilize metals (Cu, Fe, Mn, and Zn) and sulfur (S) when grown directly on mine tailings with and without compost (C) and humic substance (HS). The stress status of A. atacamensis Phil. was also evaluated through the 13 C isotopic composition of bulk leaves. A 120-day greenhouse experiment was conducted and three treatments were evaluated: (i) MT without any amendments (control), (ii) MT + C (dose: 89 ton ha -1 ), and (iii) MT + HS (0.72 ton ha -1 ). Mine tailings material exhibited low salinity, alkaline pH, high extractable S-SO 4 concentrations, and low fertility; total Fe, Mn, and Zn concentrations were within the reference range for mine tailings, but total Cu concentrations were high at 1860 ± 236 mg kg -1 . The HS had higher pH, EC, CEC, and available concentrations of N, P, and K than compost, while S-SO 4 concentrations were similar in both amendments. 13 C NMR analysis showed that the HS contained more alkyl, aromatic, and phenolic groups, while the compost was dominated by O-alkyl and carboxyl groups. At the end of the experiment, the MT + C treatment achieved a significant decrease in Cu, Fe, and Mn concentrations in the roots and aboveground parts of A. atacamensis Phil. and an increase in Zn values in both tissues. Both amendments increased the sulfur content in the aboveground parts, while metal concentrations under the HS treatment proved similar to control. Furthermore, the δ 13 CV-PDB values obtained in this study indicate that the organic amendments did not cause additional physiological stress to the plants compared to the MT treatment. Overall, A. atacamensis Phil. was shown to have the ability to phytostabilize metals and sulfur, making it a potential candidate species for in situ evaluation of the phytostabilization process on mine tailings., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Urban air pollution in cities, among the world's most critical problems, has escalated to such an extent that it threatens human health in many urban centers and causes the death of millions every year. Trace metals are significant among the components of air pollution. Trace metals can endure long without undergoing biodegradation and bioaccumulation in living organisms. Moreover, their concentration in the air increases gradually. Therefore, monitoring metal concentration is extremely important for reliable indicators of environmental pollution. Biomonitoring is an effective method for describing metal concentrations in urban areas. Chromium, manganese, and zinc, selected within the present study, have various adverse effects on plants in high concentrations. Their identification is highly critical for monitoring the pollution level in their regions. This study aimed to determine the Cr, Mn, and Zn concentration changes according to organ, and age in Elaeagnus angustifolia L., Platanus orientalis L., Koelreuteria paniculata Laxm, Ailanthus altissima (Mill.) Swingle, and Cedrus atlantica (Endl.) Manetti ex Carr is 30 years old. The accumulation of metals in the outer bark can be found as follows Zn > Mn > Cr in all species, although Ailanthus altissima (Mill.) Swingle and Platanus orientalis L. can be suitable for biomonitoring tools because concentrations change significantly depending on the airborne metal., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The coating industry is one of the most important consumers of water and chemicals and consequently is a major water polluter in Mauritius. The focus of this study was to characterise wastewater generated by a coating industry in Mauritius. The objectives were to develop a wastewater sampling strategy and to analyse the pollutant parameters as per Mauritian regulations. The wastewater samples were analysed for physicochemical properties and metal abundances over a period of 6 months. The physicochemical parameters analysed were pH, electrical conductivity (EC), true colour, total suspended solids (TSS), biological oxygen demand (BOD 5 ), chemical oxygen demand (COD), nitrate, phosphate, sulphate and free chlorine. The wastewater samples were also analysed for metal ions such as sodium, potassium, arsenic, cadmium, chromium, cobalt, copper, iron, lead, manganese, mercury, molybdenum, nickel and zinc. The results of the physicochemical parameters indicated the presence of biologically resistant organic matters in all the wastewater samples with elevated values of BOD 5 and COD, and low biodegradability index, respectively. The coating industry wastewater samples were acidic and saline in nature. Moreover, they presented high concentrations of TSS, free chlorine and sodium ions compared to standard limits promulgated by the Mauritian Government. Spearman's rank correlation matrix with non-linear regression analysis showed significant associations among the measured parameters which were found to have a common origin in the coating industry wastewater. This research will be useful for regular monitoring and setting up an adequate coating industry wastewater treatment for the potential reuse in production processes in Mauritius., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Rio Grande is a medium-sized industrial city located in the extreme south of Brazil, and previous studies in this city have shown contamination by metal(loids) and polycyclic aromatic hydrocarbons (PAHs) in water, soil, and sediment and in the atmosphere. In Brazil, the incorporation of PM 2.5 monitoring in environmental legislation is recent (2018) and, like other developing countries, the number of studies is still small. This study aimed to investigate the levels of PM 2.5 in the industrial and urban area of Rio Grande, to determine the concentration of metal(loid)s As, Cd, Cu, and Pb and of 16 PAHs in the samples of PM 2.5 , to perform the health risk assessment for these contaminants and the health impact assessment for two possible scenarios of reduction of PM 2.5 levels. Our main findings regarding the PM 2.5 samples include the following: (1) The levels of this pollutant in the city of Rio Grande were higher than those allowed in current Brazilian legislation, in both the industrial and urban areas; (2) the existence of non-carcinogenic and carcinogenic risks for metals present in all samples; (3) the absence of carcinogenic risk for the assessed PAHs; and (4) the reduction scenarios proposed pointed to a reduction of up to 22 deaths annually in conjunction with reductions in health-related expenditures. Thus, these results may serve as a basis for the development of public health policies aimed at improving air quality, jointly assisting health surveillance and directing future studies towards a better intrinsic approach to the problem., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The Jundiaí-Potengi Estuary (EJP) is located on the semi-arid coast of northeastern Brazil and is influenced by multiple sources of contamination. The sediment quality of EJP was assessed by using a multi-geochemical approach during the dry and wet seasons. Sediments were analyzed for concentrations of nutrients, metals, polycyclic aromatic hydrocarbons (PAHs), pesticides, hormones (natural and synthetic), and sterols. The results were integrated by multivariate methods. The sediment was altered by the presence of contaminants from anthropogenic and natural sources. The middle and lower estuarine areas were considered more degraded in both seasons. In these regions, metals, hormones, sterols, and PAHs were found, indicating that these regions are severely affected by industrial, sanitary and aquaculture effluents, combustion of fossil fuels, and oil spills. The upstream region was contaminated by pesticides. The contamination pattern along the EJP shows the prevalence of local sources which continuously release the chemicals into the estuary. Worse conditions occurred during the rainy season, when the runoff from urban and rural areas is more intense and carries a greater load of contaminants to the EJP., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The St. Johns River, Florida's longest river, is threatened by a variety of factors, including anthropogenic disturbances and global climate changes. Metal pollution in the Lower St. Johns River (LSJR) in Northeast Florida has been well documented. Submerged aquatic vegetation (SAV) are ecologically important plant species, known to accumulate metals and other pollutants from their surrounding environments, and have been declining in the LSJR in recent years. In this study, eight SAV taxa (Vallisneria americana, Ruppia maritima, Chara sp., Najas guadalupensis, Eleocharis sp., Hydrilla verticillata, Zannichellia palustris, and Sagittaria subulata) were collected along the LSJR from Central Florida northward to Jacksonville and the Atlantic Ocean. More than 200 SAV samples were identified, digested, and measured for a suite of metals. Mean (± standard deviation) metal concentrations in µg/g dry mass in all taxa sampled were 1.76 (± 2.75) cadmium, 35.8 (± 52.24) copper, 4.16 (± 5.74) lead, 119 (± 229) nickel, 0.98 (± 1.40) silver, and 203 (± 376) zinc. SAV metal concentrations varied across species and collection sites. In general, Z. palustris and Eleocharis sp. had the highest metal concentrations. Furthermore, a comparison of SAV metal concentrations to sediment quality guidelines for the LSJR indicated that toxicity may occur to biota exposed to these SAV. This study provides new data about SAV health in the LSJR and may help in the development of new management strategies., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Marine ecosystems are subject to contamination by metals and metalloids and other elements and compounds that are emitted due to various human activities. These substances subsequently induce changes in marine biota after entering the marine environment. Marine organisms are frequently consumed worldwide because they constitute relatively cheap and accessible food items of high nutrient quality. The aim of this study was to estimate metal accumulation in frequently consumed marine species and to evaluate the associated health risks for particular population groups in a coastal region of northwestern Mexico. The marine species were consumed in different quantities between spring (from 0.29 kg year -1 for white clam, to 38.40 kg year -1 for blue crab) and autumn (from 0.34 kg year -1 for white clam, to 15.02 kg year -1 for leopard grouper). The general distribution of metal concentrations in the marine species (n = 13 in each season) evaluated in this study followed the trend of Fe > Zn > Cu > Mn > Cr with the highest metal concentrations detected during autumn. Although many metal concentrations were above the international standards of the Food and Agriculture Organization of the United Nations (FAO) and the World Health Organization (WHO), the hazard quotient (HQ) and hazard index (HI) values for the women in this study indicated that their health was not at risk due to the consumption of either fish or seafood. In contrast, the HQ and HI values determined for groups of men and children indicated that they are at risk due to the frequent consumption of most species evaluated in this study., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

This paper presents a tiered assessment approach that enabled identification, triage, interrogation and confirmation of significantly contaminated areas of an urbanised West Australian estuary. The spatial distribution of organochlorine pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs) and bioavailable metals was determined in surficial sediments of the Swan-Canning Estuary through broad-scale screening (500 cores, 100 composite samples, 20 locations). The application of sediment quality guideline values (SQGVs) enabled ranking of locations through risk-based scoring and identification of contaminant hotspots. Subsequent targeted ecotoxicological and chemical assessment was undertaken at the highest scoring location in each tributary (80 cores, 16 composite samples, 3 locations, 16 sites). In the Canning tributary, Bull Creek sediments demonstrated the highest metal concentrations and greatest number of SQGVs exceeded. High-level toxicity was experienced in copepods and moderate toxicity in mussels (test sensitivity: copepod>mussel>amphipod). Toxicity-inducing contamination was attributable to two stormwater outfalls and limited to 300 m from points of discharge. In the Swan tributary, Claisebrook sediments demonstrated the highest concentrations of all PAHs, most OCPs and metals and the greatest number of SQGVs exceeded. High-level toxicity was reported in fish and mussels and moderate toxicity in copepods and amphipods (test sensitivity: fish>mussel>amphipod>copepod). Toxicity-inducing contamination included a stretch of estuary >1 km long, and two stormwater outfalls in the area were likely sources. The distribution and nature of PAH contamination suggested an additional source at Claisebrook. This combined chemistry and biological effects dataset provides critical information for the management of planned major development and concomitant estuary-bed disturbance in the coming decade., (© 2022. Crown.)

We used diffusive gradients in thin films (DGT) to measure potentially bioavailable metals in coastal plain streams in the southeastern USA that exhibited strong to moderate blackwater characteristics. Metals were partitioned into particulate metals, DGT-inert metals (i.e., colloidal and refractory organic complexes not accumulated by DGT), and DGT-labile metals (i.e., free metal ions, small inorganic complexes, and labile organic complexes). We also examined the influence of different DGT deployment times using data collected from the field and a follow-up laboratory study. The DGT-measured fraction of dissolved metals in the streams was 15% for Cd, 21% for Zn, 33% for Cu, 37% for Pb, and 98% for Mn. Metals bound to particulates predominated only for Pb. Most of the Cd, Pb, Zn, and Cu were associated with colloids, refractory organic complexes, or particles. Relatively small amounts were in free ion or labile complexes likely to be bioavailable through respiratory surfaces. Modeled concentrations of free and inorganically bound Cu and Pb were lower than the DGT fraction indicating that DGT accumulated some organically bound Cu and Pb that might not have been bioavailable. DGT-exposure times in excess of 5 days may have contributed to the accumulation of partly labile organic-metal complexes and were associated with substantial biofouling that caused metal uptake by DGT to depart from linearity., (© 2022. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

The change in the water quality of rainfall impacts water supply through the contamination of surface water and groundwater. The presence of potential sources for metals in the form of aerosol through atmospheric transportation from gold tailings dams, coal mines, and coal-fired power stations increases the risk of water quality deterioration in the Johannesburg region. Rainfall monitoring was conducted for one hydrological year. Rainfall amount was measured, and samples were collected for stable isotope and metal analysis. Some metals show very high concentration in the rainfall with a decreasing order from zinc, cadmium, copper to lead. Their presence in the water is not desirable, as a result of favourable pH and Eh conditions in the rainfall with contaminant inputs from the gold tailing dams, coal mines, and coal-fired power stations. Therefore, the Johannesburg rainfall can be considered as potentially toxic due to the constant input of meals into water supply dams and aquifers recharged by the rainfall.

According to several reports, the presence of transition metal elements in the atmosphere was associated with adverse health effects. The purpose of this investigation was to analyze the presence of transition metal particles with atomic numbers 22-29 on some medicinal plants (n = 22) from various regions of the Republic of Tajikistan and their content in the atmosphere. Samples (n = 43) of individual plant organs, such as seeds, flowers, leaves, trunks, and plant roots, were examined for their elemental composition using X-ray fluorescence analysis. Selection of particles contained in the atmosphere was carried out for 24 h/3 days by the aspiration method using fiberglass filters GF 10 in an apparatus installed at an altitude of 864 m on the periphery of the capital. For the analysis of plant samples, measurements were carried out on a SPECTROSCAN MAX-G wave-dispersive X-ray fluorescence spectrometer. For samples containing filtered atmosphere elements, a high-resolution PANanalytical Epsilon 5 high-resolution energy-dispersive spectrometer was used. Eight transition elements from the 1st main series of metals with atomic numbers 22-29, such as titanium, vanadium, chromium, manganese, iron, cobalt nickel, and copper, were found in plant organs, as well as in the atmosphere samples. Our results showed that the distribution of metals on plants varied depending on plants and their organs. We did not find any correlation between the region of plant collection and their absorption of metal elements. The distribution of metals varied in various plant organs. In the atmosphere samples, we found all the metals that were found in plants. In conclusion, medicinal plants can adsorb and accumulate some harmful chemical elements in their organs, are involved in the recirculation of these metals, and contribute air pollution.

The Karkonosze National Park is affected by long-distance metal air transport of anthropogenic contamination as well as by tourist activity. Therefore, concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn were evaluated in soil as well as in vital and non-vital fronds of Athyrium distentifolium Opiz collected in the middle of the growing season from glacial cirques in the Karkonosze. Additionally, fronds of the same species turning brown in autumn were collected from the same sampling sites. The health of ferns was impacted by the contents of Co, Cu, Fe, Mn, Ni, Pb and Zn in fronds, which may indicate that A. distentifolium uses elements accumulated in its tissues as defence against pathogens. Individuals from higher altitudes contained higher concentrations of Cd, Cu, Ni, Fe and Pb than those from lower altitudes. Autumn fronds of A. distentifolium contained a significantly higher concentration of Cr, Cu, Fe, Mn and Pb than vital summer fronds, which may indicate sequestration of these elements in senescing fronds probably to remove potentially harmful metals. Non-vital ferns were a better accumulator of Pb than vital ones, while both types of ferns accumulated Mn in a similar way.

Several trace metals and metalloids have been introduced into aquatic ecosystems due to anthropogenic activities. Some of these elements like mercury (in the form of methylmercury) are easily transferred from one trophic level to another and can accumulate to toxic quantities in organisms at the top of aquatic food webs. For this reason, seabirds like the eastern brown pelican (Pelecanus occidentalis carolinensis) are susceptible to heavy metal and metalloid toxicity and may warrant periodic monitoring. Mercury, cadmium, copper, arsenic, and selenium were measured in the feathers of adult brown pelicans and chicks in several breeding colonies (Shamrock Island, Chester Island, Marker 52 Island, North Deer Island, Raccoon Island, Felicity Island, Gaillard Island, Audubon Island, and Ten Palms Island) in the northern Gulf of Mexico. Overall, most chicks and adults examined had mercury levels in feathers that were below the concentration range in which birds show symptoms of mercury toxicity. However, chicks in the Audubon Island and Ten Palms Island colonies displayed mercury levels that were 3 times higher than values observed in 5 other colonies. In addition, several adults and chicks displayed selenium concentrations that are above what is considered safe for birds. Cadmium quantities in feathers were below levels that trigger toxicity in birds. Similarly, arsenic measurements were at quantities below the average of what has been reported for birds living in contaminated sites. Finally, we identify pelican breeding colonies that may warrant monitoring due to elevated levels of contaminants.

A by-product of industrialization and population growth, automobile scrap yards are a potential source of metal contamination in soil. This study evaluated the use of portable X-ray fluorescence (pXRF) spectrometry and magnetic susceptibility (χ) analysis in assessing metal soil contamination in scrap yards located in Brazil. Five automobile scrap yards were selected in Curitiba, Paraná State (CB1, CB2, and CB3) and Lavras, Minas Gerais State (LV1 and LV2). By evaluating metal concentrations and geoaccumulation index values, we verified moderate Cu, Pb, and Zr contamination and moderate to high Zn contamination, primarily in the topsoil (0-10 cm). Soil Zn concentrations in automobile scrap yards were on average four times higher than in reference soils, suggesting that galvanized automobile parts may be the primary source of this soil contaminant. Although other elements (i.e., As, Cr, Fe, Nb, Ni, and Y) were slightly increased compared to reference values in one or more soils, concentrations did not constitute contamination. Automobile scrap yard topsoil had higher χ values (5.8 to 52.9 × 10 -7  m 3  kg -1 ) at low frequency (χ lf ) compared to reference soil (3.6 to 7.5 × 10 -7  m 3  kg -1 ). The highest values of χ lf occurred in LV soils, which also represented the highest Zn contamination. Magnetic multidomain characteristics (percent frequency-dependent susceptibility between 2 and 10) indicated magnetic particle contributions of anthropogenic origin. The use of pXRF and χ lf as non-destructive techniques displays potential for identifying soil contamination in automobile scrap yards.

This study presents a comparative assessment of the trace metal air pollutants of urban, peri-urban, and rural areas of the Brahmaputra Valley plain in the Eastern Himalayan region using biomonitoring of Pyxine cocoes. In situ collection of the thalli growing on Bombax sp. from representative locations was done, which was analyzed for Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, and Zn using ICP-OES. The metals, viz. Cd, Cr, Ni, Pb, and Zn, were highly enriched, indicating anthropogenic influences. The coefficients of variation (CV) of Co, Cr, and Ni were also high, pointing at their accumulation from local sources. Influence of local sources was also observed for Cd, Fe, and Mn in peri-urban and Cd in urban samples. Metals related to automobiles were accumulated in greater volume in samples of peri-urban locations, which implies the impact of the highway that runs through these locations and other associated human activities. The samples of urban areas were found to be enriched with metals originating from both vehicular emissions and road dust. Also, accumulations of Co, Cr, Cu, Fe, Mn, and Ni in the lichen thalli were found to be around tea gardens. Inter-species correlations were found to be positively significant for most of the elements. Principal component analysis (PCA) of the metal data revealed that vehicular emission and coal burning, street dust, and crustal dust were the major sources of trace metals in the ambient air of the region.

The presence of substances such as hormones and toxic metal in aquatic ecosystem is interesting to the scientific community due to their adverse effects. We quantified 17α-ethynylestradiol (EE2) and toxic metals in the surface waters from Sorocaba and Pirajibu Rivers, in São Paulo State, and we estimated the daily intake for hormone, based on the amount of water consumed. EE2, Cd, Hg, As, Pb, and Mn were seasonally quantified in six different locations along the rivers. EE2 was evaluated by high-performance liquid chromatography. Toxic metals were determined by inductively coupled plasma mass spectrometer. Considering the entire sample year, EE2 concentrations ranged from 4.5 to 48.2 μg L -1 . Comparing Sorocaba and Pirajibu rivers, the sample point in the entrance of the Pirajibu River through the city of Itu, São Paulo State, had higher amounts of EE2. Regarding metals, all results are according to the Brazilian and World Health Organization guidelines for drinking-water quality, except for Mn levels, which were higher than the limits in Autumn season in two locations. The estimated daily intake ranged from 13.45 to 40.9 μg/day/person. In conclusion, concentrations of EE2 in the Sorocaba and Pirajibu Rivers were higher than in other countries. The levels were as high as an intake of one pill for each person every day (considering an oral contraceptive has 0.03 mg of ethinylestradiol). Even though concentrations of toxic elements are in accordance with the Brazilian Regulation and World Health Organization, legislation for hormones and drugs needs to advance.

The quality of drinking water source remains as a major concern in areas of developing and underdeveloped countries worldwide. The treatment and supply of drinking water in Rwanda are carried out by Water and Sanitation Corporation, a state-owned public company. However, it is not able to supply water to all households. Consequently, the non-serviced households depend on natural water sources, like springs, to meet their water requirements. Nevertheless, the water quality in these springs is scarcely known. Therefore, this study assessed and compared metal elements in drinking water sources in the dry and rainy seasons in 2017 using the contamination degree, metal index, and geographic information systems to reveal the spatial distribution of water quality within the considered water sources of springs in Rwanda. The samples were collected monthly from nine water sources of springs and the measured elements are aluminium, calcium, copper, iron, manganese, and zinc. The metal index indicated that during the dry season and rainy season, the sites of Kibungo (1.10 and 1.26) and Kinigi (1.01 and 1.54) have assessed a metal index which is higher than 1. Thus, the water quality of those sites was getting the threshold of warning. The analysis indicated that pollutants are easily transported into water bodies during the rainy season in urban and rural areas to a greater extent than during the dry season .

Sita, a small tropical river originating in the Western Ghats, southwestern India, was chosen for this study to understand the spatial and temporal variability of dissolved trace elements and major ions. Sampling was done in monsoon, post-monsoon and pre-monsoon seasons across the river catchment. Dissolved elements like Zn, Ni, Cu and Co showed high concentrations during monsoon which could be because of the intense chemical weathering of silicate rocks in the catchment, surface runoff and wet atmospheric deposition. In the remaining seasons, the river is fed by the groundwater and anthropogenic effluents which is contributing to higher concentrations of dissolved Pb, Fe and Cd. The results are analysed using factor analysis (SPSS 12), which helped to delineate the sources of metal assemblages. Factor 1 is dominated by major ions (Na, K, Cl, Mg, Ca), which could be naturally sourced from atmospheric deposition and weathering of rocks. Factor 2 is dominated by trace metals (Cd, Pb, Co) and sulphates (SO 4 ) which may have anthropogenic sources such as the discharge of domestic and industrial effluents and agricultural effluents.

Though not litigable in most European countries, portable X-ray fluorescence spectrometers (pXRF) provide cost- and time-effective as well as prompt information about hot spots of inorganic soil contaminants. The quality of aqua regia analysis of contaminants can be approximated by a thorough sample preparation, i.e., homogenization, grinding, and sieving of the examined soil before pXRF measurement is carried out. However, elaborate sample preparation causes a trade-off in terms of the desired straightforwardness of the pXRF method. For a first assessment of the in situ accuracy of pXRF measurements, two equal pXRF devices were used in parallel to determine the contents of As, Cu, Fe, Mn, Pb, Rb, Sr, Zn, and Zr of 9 identical points of a riparian soil profile. Maximum measurement values were not restricted to one pXRF device, but changed from element to element. Pearson correlation coefficients of the parallel measurements varied between 0.07 (Cu) and 0.80 (Zn), reflecting small-scale heterogeneity of the soil constituents as well as element-specific interferences. For each element, overall deviations between measurement parallels were expressed as the root-mean-square error (RMSE) and contrasted against the element-specific information depth in soil, i.e., the depth interval, from which the received spectral signals originate. From this, a gradual relation could be derived: The greater the information depth, the more stable the measured element value turns out. This context should be taken into account, when interpreting contents of elements with small atomic numbers.

The objective of this study was to determine eco-edaphic characteristics and influence of different substrates on mineral characteristics of facultative serpentinophyte. The total concentration of 20 elements Al, As, B, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, P, Pb, S, Se, and Zn in soil samples and aboveground parts of medicinal plant species Teucrium montanum from various calcareous and serpentinite habitats in the territory of Serbia was determined. The concentration of the elements was established by inductively coupled plasma optical emission spectrometry-ICP-OES. The obtained results showed that the quantities of certain elements Al, As, B, Ca, Cd, Cu, K, Li, P, Se, and Zn were detected more in the soil samples from calcareous habitats in comparison to the quantities of other metals Co, Cr, Fe, Mg, Mn, Na, Ni, which were more frequently found in the soil samples from the serpentinite habitats. Analyzed plant samples from calcareous habitats contained higher concentrations of Al, Ca, Li, and Zn as opposed to serpentinite containing higher concentrations of Co, Cr, Fe, Mg, Mn, Na, Ni, and Se. Examined species can accumulate macro- and microelements in different quantities, depending on the substrate type. Differences in the concentration of certain elements in the soil samples and aboveground parts of the T. montanum from calcareous and serpentinite habitats indicate significant phenotypic plasticity of the investigated species as well as the existence of specific serpentinite ecotypes developed by the activity of various edaphic factors.

An assessment of mobility and bioavailability of trace elements present in the soil requires the determination of these elements in soil samples by an appropriate methodology. In such a context, the use of mild extraction reagents-such as water-is considered to be appropriate. On the other hand, performing an analysis of a reference material together with real samples is recommended in order to control the quality of analytical procedure. The quantification of 27 analytes in aqueous extracts of the soil CRMs samples is described. The methodology consisted of single-step extraction of analytes by deionized water (m/v = 1/10) with their subsequent direct determination by inductively coupled plasma-atomic emission spectrometry (ICP-OES). Three certified reference materials (CRM) for soils have been selected as model samples: NCS DC 77302 (alias GBW 07410), Metranal-31, and Metranal-33. Although the recoveries of the selected elements obtained by water extractions are very low (i.e., the values usually do not exceed 1%), the results obtained in this study reveal the elements that by means of ICP-OES can be quantified in the water extracts of unpolluted soils are as follows: Al, Ba, Ca, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, S, Sr, Ti, and V. However, ICP-OES is not sensitive enough to quantify the elements As, Be, Cd, Co, Pb, Sb, Se, Tl, and Zn that are present in the water extracts of clean soil samples in too low mass fractions. The results obtained in this paper are useful for future uses of the three tested CRMs, in the cases of the extraction of the analytes by deionized water at room temperature.

Concentrations of arsenic, nickel and chromium in sediments of the nearshore Pilbara Region of Western Australia's mid -north coast have caused concerns to regulators issuing ocean disposal permits for many years. A meta-analysis of data from a large number of surveys, conducted in support of permit applications over many years and across hundreds of kilometres of coastline, shows that, when assessed as total metal concentrations, chromium and nickel occur routinely at concentrations above those recommended as screening triggers by national guidelines and arsenic more rarely. Arsenic was concentrated in surface sediments, consistent with an organic origin. Concentrations of nickel and chromium were higher in deeper sediment layers, consistent with a natural geological origin. However, sediment particle sizing was a major determinant of total metal concentrations of all three metals, and bioavailability was always much lower and within recommended guidelines. Past dredging activity for channels and berths in the large ports of the Pilbara has most likely led to an elevation of fine fractions of surface sediments within operating port areas, when compared to the undisturbed surrounding areas, and may also have increased the proportion of sediment from deeper substrates at the surface. Whilst total concentrations of chromium and nickel commonly exceed screening guidelines throughout the nearshore Pilbara Region, their bioavailability was low and these metals present a little threat to biota.

The evaluation of the chemical leaching potential from soils amended with biosolid is of extreme importance for environmental safety of agricultural use of these residues. The objective of this study was to evaluate the polluting potential and possible risks associated with the agricultural use of biosolids generated by the polyethylene terephthalate (PET) fiber and resin industry through ionic speciation and analysis of the activity of chemical species present in the leached solution from Inceptisol treated with rates 0, 6, 12, 18, 24, 48, 96, and 144 Mg ha -1 on dry basis. The experiment was conducted in a lysimeter and the treatments with three replications were distributed at random. Chemical leaching was made by application of CaC1 2 0.01 mol L -1 solutions in a volume fourfold higher than the water retention capacity of the soil, divided into five leaching events: 210, 245, 280, 315, and 350 days of incubation. Chemical species concentrations in collected leachates were used for ionic speciation by geochemical software Visual MINTEQA2 version 4.0. Impact factor of chemical species was calculated as the ratio between maximum concentration in the leach solution in the treated soil and control. Dissolved organic carbon had strong influence on Pb +2 and Cu +2 leaching, but these elements in free or complexed forms presented low activities in solution. Leaching of NO 3 - , Zn +2 , and Na + represents the main environmental risk of agricultural use of this residue. However, these risks can be minimized if technical criteria and critical limits for the agronomic use of biosolids were observed.

Drinking water production may generate significant amounts of sludge, which may be contaminated with various metals. For the first time, the mobility/lability of contaminants from two water treatment sludge piles in the Juturnaíba Reservoir was evaluated by applying two geochemical approaches: sequential extractions and attenuation of concentrations model. Both procedures were applied to evaluate the mobility/lability of Al, Cr, Cu, Fe, Mn, and Zn on samples collected in the sludge piles and in the neighborhood of both water treatment plants. The results show that aluminum presents considerably higher concentrations in the sediments close to the sludge piles, with more labile phases; however, the attenuation of concentrations model indicates little spreading of this contaminant in the reservoir. Manganese was shown to be severely depleted in the sludge, indicating that it can be leached away, due to the reducing conditions of the pile. The other elements showed low concentrations and were shown not to affect the concentrations in the reservoir. While the geochemical fractionation indicates the possibility of dissolution to the water column, the attenuation of concentrations model gives information on the spatial dispersion of the contaminants, constituting interesting complementary approaches.

Sediments represent complex mixtures and the impacts of their physical and chemical processes on biota are important for assessing potential health risks. We aimed to rank sediment samples from Guanabara Bay by developing an algorithm (quality ratio-QR), focusing on key sediment parameters (fine grain size, total organic carbon (TOC), metal concentrations) and enzymatic activities (dehydrogenase (DHA-energy production into cell) and esterases (EST-hydrolase organic matter outside the cell membrane)) of in situ microbial communities. Our QR is supported by quantitative information and significant correlations between geochemical and microbial processes. The QR is a function of the dependent term DHA/EST and the geochemical term (TOC×∑CF)/fine-grained sediment, where ∑CF is the sum of contamination factors (ratio between actual and background metal concentrations). We could rank our sampling sites into three risk classes based on QR: low, medium, and high. Our findings suggest altered homeostasis due to the development of contamination resistance. We applied a sensitivity analysis, using Brazilian law for sediment quality assessment, to calibrate our risk index. Our QR is suitable for measuring the potential health risk of any sediment, especially in developing countries with serious technical limitations, since its evaluated parameters are cheap, fast, and easy to obtain.

Changes in soil available metal, particularly, distribution changes in the soil profile relative to long-term peach cultivation, have not been studied thoroughly. Soil samples at depths of up to 100 cm in the soil profile were taken from peach orchards that were cultivated for 7, 15, and 50 years. We analyzed available metals (Zn, Fe, Mn, Al, and Cu), soil pH, total nitrogen (TN), nitrate nitrogen (NO 3 - -N), and ammonium nitrogen (NH 4 + -N) in different soil layers (0-10 cm, 10-20 cm, 20-40 cm, 40-60 cm, 60-80 cm, and 80-100 cm). The results showed that available metals were enriched in the topsoil (0-20 cm) after 50 years of peach cultivation, with the highest contents of available Fe (1.0 mg kg -1 ), Al (188.2 mg kg -1 ), and Cu (0.7 mg kg -1 ) in the 10-20 cm layer and Zn (11.7 mg kg -1 ) in the 0-10 cm layer. The soil pH in the 0-40 cm layer decreased with increasing periods of peach cultivation, with the lowest pH (4.2) in the 10-20 cm layer after 50 years of peach cultivation. Soil pH was negatively correlated with available metals (R = - 0.579, P < 0.05 for Zn, R = - 0.727, P < 0.01 for Fe, R = - 0.792, P < 0.01 for Mn, R = - 0.690, P < 0.01 for Al, and R = - 0.783, P < 0.01 for Cu). The highest contents of NO 3 - -N (212.9 mg kg -1 ) and NH 4 + -N (10.2 mg kg -1 ) were observed in the 50-year-old 0-10 cm layer, and soil pH was correlated negatively with the contents of NO 3 - -N and NH 4 + -N. Overall, our results indicated that the continuous input of nitrogen fertilizers may play an important role in soil acidification, and soil acidification may result in high accumulation of available metals in soil after long-term peach cultivation.

A baseline environmental characterization of Chrome and Dogfish bays on the Kenai Peninsula, Alaska, was conducted using a sediment quality triad approach. Resident fish and blue mussel body burdens were also assessed. The data was derived from a larger study that assessed seven distinct water bodies on the Kenai Peninsula's north side, draining into Kachemak Bay. Sampling sites for water quality measurements and sediment were randomized within each embayment. Concentrations of 140 organic and elemental contaminants were analyzed. Habitat parameters (depth, salinity, temperature, dissolved oxygen, sediment grain size, and organic carbon content) that influence elemental distribution were also measured at each sampling site. Chrome Bay and Dogfish Bay open into lower Cook Inlet and had coarser sediments than the other bays studied. Concentrations of chromium and nickel were extremely high in Chrome Bay. Concentrations were several times higher than observed concentrations seen throughout other locations in south-central Alaska. Other elemental concentrations varied between and within bays, with several locations exceeding lower sediment quality guidelines. Whole sediment amphipod toxicity bioassays were conducted with sediments from Chrome Bay. No sample exhibited significant mortality or sublethal effects. Body burdens of three species of fish and mussels collected in Chrome Bay did not exhibit elevated concentrations relative to other studies in Kachemak Bay or the Alaska Dept. of Environmental Conservation, Fish Monitoring Program. Despite the very high concentrations of Cr and Ni in the sediments, the metals do not appear to be bioavailable to resident biota.

A sediment core was sampled in an urban lake in southern Brazil, and the presence of 27 trace elements was assessed. The geochronology showed that the core corresponds to the period from 1914 to 2012. Accumulation of metals and the level of pollution was measured by the geoaccumulation index (I geo ) and enrichment factor (EF). According to I geo and EF, the lake showed a high concentration of Ag, Se, Na, Au, S, Ca, Mg, Ba, Sb, Bi, and Sr with 5 ≤ EF ≤ 45 and I geo class = 2-6. The EF to Au = 45 and Ag = 40. In contrast, Fe, Al, As, Cr, Ga, La, Sc, and Th do not represent pollution (I geo  ≤ 0 and EF ≤ 1.6). A principal component analysis and Spearman correlation showed a first group composed of Ca, Mg, P, Ba, Sr, Na, K, Ag, Bi, Au, Mo, sand, silt, and total organic carbon with positive correlation ≥ 0.70 and > 0.95 to Sr, Ag, sand, and silt. These were negatively correlated ≥- 0.70 with Fe. The second group: Fe, La, Ga, Ti, V, Cr, As, Al, Th from lithogenic source. Prediction models for the concentration for Mg, Na, P, Sr, Fe, Ga, and total organic carbon to years 2020-2050 were obtained with R 2  > 0.65. In the anthropogenic source analyses, a watershed land use map indicates multiple uses of the land, with 53% urban area, 14.6% agriculture, and 14.5% forest.

The Mexico City Metropolitan Area (MCMA) was the object of a chemical elemental characterization (Ti, V, Cr, Mn, Co, Ni, Cu, Mo, Ag, Cd, Sb, Pb, La, Sm, Ce, and Eu) of PM 2.5 collected during 2013 and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Sampling campaigns were carried out at five locations simultaneously-northwest, northeast, center, southwest, and southeast-during dry-warm season (April), rainy season (August), and dry-cold season (November). By means of enrichment factor (EF) and principal component analysis (PCA), it was possible to attribute the analyzed elements to geogenic and anthropogenic sources, as well as to identify a group of elements with mixed provenance sources. The highest concentrations for most metals were found in northwest and northeast, and during dry-warm (DW), confirming the trend observed in PM 2.5 samples collected in 2011. Despite similarities between 2011 and 2013, an increase of 17% in PM 2.5 mass concentration was observed, mainly attributable to geogenic sources, whereby the importance of wind intensity to the impact of emission sources is highlighted. The effect of wind intensity was revealed, by means of polar plots, as the controlling mechanism for this increase. This allowed us to conclude that high-speed episodes (5 m s -1 ) were responsible for raising geogenic metal concentrations rather than wind direction.