Search

Investigation of the effect of thermal radiation on a fully developed magnetohydrodynamic (MHD) convective flow of a Newtonian, incompressible and electrically conducting fluid in a vertical microchannel bounded by two infinite vertical parallel plates with constant temperature walls through a lateral magnetic field of uniform strength is presented. The Rosseland model for the conduction radiation heat transfer in an absorbing medium and two plates with slip-flow and no-slip conditions are assumed. In addition, the induced magnetic field is neglected due to the assumption of a small magnetic Reynolds number. The non-dimensional governing equations are solved numerically using Runge–Kutta–Fehlberg method with a shooting technique. The channel is optimized based on the Second Law of Thermodynamics by changing various parameters such as the thermal radiation parameter, the temperature parameter, Hartmann number, Grashof to Reynolds ratio, velocity slip length, and temperature jump.

The results of the computation of entropy generation rates through the dissipation of ordered regions within selected helium boundary layer flows are presented. Entropy generation rates in helium boundary layer flows for five cases of increasing temperature and pressure are considered. The basic format of a turbulent spot is used as the flow model. Statistical processing of the time-dependent series solutions of the nonlinear, coupled Lorenz-type differential equations for the spectral velocity wave components in the three-dimensional boundary layer configuration yields the local volumetric entropy generation rates. Extension of the computational method to the transition from laminar to fully turbulent flow is discussed. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel framework for the diagnosis of incipient bearing faults and trend prediction of weak faults which result in gradual aggravation with the bearing vibration intensity as the characteristic parameter. For the weak fault diagnosis, the proposed framework adopts the improved minimum entropy deconvolution (MED) theory to identify the weak fault characteristics of mechanical equipment. From a large number of actual data analysis, once a bearing shows a weak fault, the bearing vibration intensity not only has random non-stationary, but also long-range dependent (LRD) characteristics. Therefore, the stochastic model with LRD-fractional Brown motion (FBM) is proposed to evaluate and predict the condition of slowly varying bearing faults which is a gradual process from weak fault occurrence to severity. For the FBM stochastic model, we mainly implement the derivation and the parameter identification of the FBM model. This is the first study to slowly fault prediction with stochastic model FBM. Experimental results show that the proposed methods can obtain the best performance in incipient fault diagnosis and bearing condition trend prediction. [ABSTRACT FROM AUTHOR]

Fluid machinery operating in the supersonic regime unveil avenues towards more compact technology. However, internal supersonic flows are associated with high aerodynamic and thermal penalties, which usually prevent their practical implementation. Indeed, both shock losses and the limited operational range represent particular challenges to aerodynamic designers that should be taken into account at the initial phase of the design process. This paper presents a design methodology for supersonic passages based on direct evaluations of the velocity field using the method of characteristics and computation of entropy generation across shock waves. This meshless function evaluation tool is then coupled to an optimization scheme, based on evolutionary algorithms that minimize the entropy generation across the supersonic passage. Finally, we assessed the results with 3D Reynolds Averaged Navier Stokes calculations. [ABSTRACT FROM AUTHOR]

Safety control of concrete dams is required due to the potential great loss of life and property in case of dam failure. The purpose of this paper is to feed back the operational control loads for concrete dam displacement using the maximum entropy method. The proposed method is not aimed at a judgement about the safety conditions of the dam. When a strong trend-line effect is evident, the method should be carefully applied. In these cases, the hydrostatic and temperature effects are added to the irreversible displacements, thus maximum operational loads should be accordingly reduced. The probability density function for the extreme load effect component of dam displacement can be selected by employing the principle of maximum entropy, which is effective to construct the least subjective probability density distribution merely given the moments information from the stated data. The critical load effect component in the warning criterion can be determined through the corresponding cumulative distribution function obtained by the maximum entropy method. Then the control loads feedback of concrete dam displacement is realized by the proposed warning criterion. The proposed method is applied to a concrete dam. A comparison of the results shows that the maximum entropy method can feed back rational control loads for the dam displacement. The control loads diagram obtained can be a straightforward and visual tool to the operation and management department of the concrete dam. The result from the proposed method is recommended to be used due to minimal subjectivity. [ABSTRACT FROM AUTHOR]

Investigation of the effect of thermal radiation on a fully developed magnetohydrodynamic (MHD) convective flow of a Newtonian, incompressible and electrically conducting fluid in a vertical microchannel bounded by two infinite vertical parallel plates with constant temperature walls through a lateral magnetic field of uniform strength is presented. The Rosseland model for the conduction radiation heat transfer in an absorbing medium and two plates with slip-flow and no-slip conditions are assumed. In addition, the induced magnetic field is neglected due to the assumption of a small magnetic Reynolds number. The non-dimensional governing equations are solved numerically using Runge-Kutta-Fehlberg method with a shooting technique. The channel is optimized based on the Second Law of Thermodynamics by changing various parameters such as the thermal radiation parameter, the temperature parameter, Hartmann number, Grashof to Reynolds ratio, velocity slip length, and temperature jump. [ABSTRACT FROM AUTHOR]