Search

Recently, auxetic metamaterials have turned into an area of growing interest, because of their deformation uniqueness, design flexibility, and functional diversity. To achieve their programmable design of densification and energy absorption, the variable stiffness factor method (VSF) emerged. However, the energy absorption capacity of the metamaterials designed by this method has a significant reduction. In this work, to remedy this defect, several different lightweight specimens are proposed and fabricated to extend the stage of energy absorption and retain the tunability. Then quasi-static compression tests and finite element methods are carried out to analyze the mechanical properties of the designed boundary-constrained structure (BCS) and X-shape constrained structure (XCS). The accuracy of the densification points and energy absorption capacity of the two structures at different VSF values are also studied. The results show that the densification points of the designed structures can be adjusted quantitatively, and their deformation modes are more stable than conventional structures during compression. Furthermore, their specific energy absorption is four and five times higher than that of non-lightweight structures with VSF = 40%, respectively. These findings contribute to advancing the implementation of auxetics in applications of multistage protective structures. • A lightweight metamaterial based on the variable stiffness factor (VSF) method is proposed. • The proposed structures realize multi-level energy absorption and stable deformation. • The SEA of proposed structures was 4 and 5 times higher than that of VSF = 40% structure. [ABSTRACT FROM AUTHOR]

• Blast experiments were conducted to study the close-in blast effect and failure characteristics of honeycomb HSPs. • The blast performance of auxetic HSPs is compared with regular hexagonal HSPs. • Simulation is in good agreement with experiments and can describe the deformation and fracture damage. • The effect of the core type and unit-cell angle on the damage of HSPs is investigated. 3D-printed auxetic honeycomb sandwich panels (HSPs) have considerable potential for blast resistance enhancement. This study aims to bridge the gap with regard to the experimental data on the effect of 3D-printed auxetic hexagonal honeycomb cores on the blast response of HSPs. To this end, the blast resistance of HSPs developed using auxetic re-entrant and regular hexagonal honeycomb cores is investigated experimentally and numerically. First, six HSPs are tested under close-in blast loadings. The HSPs comprise Q345 steel top and bottom sheets as well as a honeycomb aluminum alloy core with two configurations (regular hexagonal and auxetic re-entrant). According to the results, the former configuration enhances the HSP blast resistance by not only decreasing the deformation of the HSPs but also improving their damage tolerance. In addition, the responses of the HSPs are numerically studied via finite element analysis. The numerical method using the finite element program LS-DYNA achieves reasonable accuracy. Finally, a parametric study is conducted to investigate the effects of the honeycomb type, cell angle, debonding effects, and core material on the blast resistance of the HSPs. The results demonstrate that employing auxetic hexagonal honeycomb core, smaller cell angle, and ductile core material can improve the blast resistance of HSPs. [ABSTRACT FROM AUTHOR]