Search

Plowing refers to the phenomenon by which a landslide displaces and pushes the path material forward. Despite its importance in shaping the dynamics of many rapid flow-like loess landslides, the mechanism of plowing is not fully understood. Therefore, this paper presents an improved numerical model based on the material point method (MPM). This model takes into account the interactions between the landslide mass and the path material. The reliability of this model was validated by simulating two granular column collapse experiments involving interaction with an erodible mass. The model was then applied to analyze the plowing dynamics of the Ximiaodian loess landslide in Jingyang County, Shaanxi Province, China. A series of well-designed simulations were conducted to investigate this specific landslide event, contributing to a deeper understanding of the plowing phenomenon in loess landslides. The simulation results show that our model can satisfactorily simulate the plowing process of the Ximiaodian landslide. The plowing process of a rapid-flow loess landslide is proposed to consist of four distinct stages: 1) the collision stage, when the landslide strikes the terrace, resulting in the bending of its strata; 2) the shear failure stage, characterized by significant plastic shear deformation within the bent strata, resulting in the formation of multiple shear failure planes; 3) the steady plowing stage, during which the deformation structure in the affected terrace stabilizes and plowing continues in a steady pattern; and 4) the stopping stage, when the propagation of the disturbed terrace gradually stops. Furthermore, the disturbed terrace zone exhibits three distinct deformation structures. In the rear part, a stable zone develops where the terrace layers are compressed. However, due to the compressive forces exerted by the overlying loess, no significant shear deformation is observed. The middle part is the shear failure zone, characterized by the formation of multiple shear failure planes. The front part is the upheaval zone, where the terrace layers are slightly bent and tilted. • An improved MPM model is proposed to simulate the plowing process of rapid flow-like landslides. • The plowing mechanism of a real loess landslide is analyzed by the MPM model for the first time. • The plowing process of a rapid flow-like loess landslide consists of four stages. • Three distinct deformation structures are formed in the disturbed terrace zone during the plowing process. [ABSTRACT FROM AUTHOR]

Effective detection of groundwater in landslide areas is crucial for landslide monitoring. The magnetic resonance sounding (MRS) method is a geophysical technique that can directly detect groundwater. However, its application in landslide groundwater monitoring is often hindered by the complex topography of landslides. This paper presents an MRS framework that accounts for the impact of landslide topography on groundwater detection. The framework includes the use of drone photogrammetry to obtain high-precision topography data and real-time kinematic equipment to acquire the coordinates of key points along the MRS coil. A three-dimensional finite element model is then constructed to calculate the alternating magnetic field generated by the MRS coil and the kernel function required for MRS inversion. Two typical landslide topography models—terrace and gully—are constructed and analyzed using numerical simulations. The results indicate that landslide topography significantly impacts the quality of groundwater information retrieved by MRS in both one-dimensional and two-dimensional inversions, affecting the accurate detection and identification of infiltration surfaces, sliding zone water, and bedrock surfaces. If accurate topography data are obtained and appropriate kernel functions are calculated, the accuracy of the inversion can be greatly improved. An example of using the MRS method to detect groundwater in a complex landslide in the Three Gorges Reservoir area of China is then presented. The MRS inversion results that consider landslide topography are confirmed using borehole data, electrical resistivity tomography detection results, and on-site drainage tunnel investigations. The water-content distribution inside the landslide body is obtained, providing information helpful to define sliding zones in multi-level landslides. The proposed landslide MRS detection framework makes it possible to apply MRS methods to the detection of landslide groundwater distribution, analysis of seepage fields, and discrimination of landslide geological structures. • Landslide topography significantly affects the quality of groundwater information retrieved by MRS. • Obtaining accurate topography data and calculating appropriate kernel functions improve MRS inversion results. • MRS field work on a complex landslide is validated by borehole data, ERT, and on-site drainage tunnel investigations. [ABSTRACT FROM AUTHOR]