Search

• A first study of the effect of full creepage on RCF crack growth behaviour. • Predicted crack growth directions show a good agreement with field observation. • Lateral and spin creepages can significantly affect K II and K III evolutions. • Increase in spin creepage is more detrimental to RCF crack driving force. In heavy-haul railway systems, the experience of high traction force of rails in curved tracks significantly accelerates the rolling contact fatigue crack growth. The overall level of traction force and its detailed distribution within a contact patch can be determined by the extent of wheel slips in different directions, also referred to as creepage. However, few studies have focused on quantifying the influence of creepage on rolling contact fatigue crack growth behaviour. In this paper, a numerical method is proposed to investigate the non-proportional mixed-mode rolling contact fatigue crack growth behaviour in the presence of severe longitudinal, lateral and spin creepages. To partially validate the proposed numerical method, the predicted crack growth directions on the rail surface are compared with the cracking patterns obtained from field observations. A parametric study is also conducted to further quantify the influence of different creepage combinations on the evolution of stress intensity factors at the crack front. Results show that both lateral and spin creepages can significantly affect the phase and maximum magnitude of K II and K III during one complete loading cycle. Moreover, the increase of spin creepage is found to have a more detrimental effect on overall RCF crack driving force than the increase of the other two creepage components. [ABSTRACT FROM AUTHOR]

• FASTSIM algorithm implementation in Abaqus to consider slipping and adhesion zones of the wheel/rail contact patch. • XFEM rolling contact fatigue (RCF) analysis of a 60E1 rail profile considering creepages. • Validation of the developed rail model with data available in the literature. • Sensitivity analysis to determine the influence of contact conditions on the fatigue life of rails. In this work the influence of considering wheel-rail contact creepages on fatigue crack growth rates due to Rolling Contact Fatigue (RCF) is studied. For this purpose, the FASTSIM algorithm, which considers the moving complex pressure distribution with slipping and adhesion zones of the wheel-rail contact patch, has been implemented in Abaqus using FORTRAN code subroutines. The developed methodology has been validated with a 60E1 rail profile model which uses XFEM, by comparing the obtained Stress Intensity Factors (SIFs) and sub-surface shear stresses with numerical results available in the literature. Finally, the RCF crack propagation analysis of a 60E1 rail profile with different contact conditions has been performed using the XFEM. The obtained results justify the necessity of considering contact creepages on contact shear stresses for crack growth analysis. [ABSTRACT FROM AUTHOR]

• FASTSIM algorithm implementation in Abaqus to consider slipping and adhesion zones of the wheel/rail contact patch. • XFEM rolling contact fatigue (RCF) analysis of a 60E1 rail profile considering creepages. • Validation of the developed rail model with data available in the literature. • Sensitivity analysis to determine the influence of contact conditions on the fatigue life of rails. In this work the influence of considering wheel-rail contact creepages on fatigue crack growth rates due to Rolling Contact Fatigue (RCF) is studied. For this purpose, the FASTSIM algorithm, which considers the moving complex pressure distribution with slipping and adhesion zones of the wheel-rail contact patch, has been implemented in Abaqus using FORTRAN code subroutines. The developed methodology has been validated with a 60E1 rail profile model which uses XFEM, by comparing the obtained Stress Intensity Factors (SIFs) and sub-surface shear stresses with numerical results available in the literature. Finally, the RCF crack propagation analysis of a 60E1 rail profile with different contact conditions has been performed using the XFEM. The obtained results justify the necessity of considering contact creepages on contact shear stresses for crack growth analysis. [ABSTRACT FROM AUTHOR]