Search

ABSTRACTWind tunnel tests or computational fluid dynamics (CFD) simulations of the aeroelastic model of a bridge deck section are currently used to make sure that significant vortex-induced vibration (VIV) of a long-span bridge will not occur after the bridge is put into operation. However, significant VIV still occurred in several long-span bridges in operation, indicating that the currently used wind tunnel tests and CFD simulations have some drawbacks or uncertainties. This study aims at establishing a digital twin by interacting CFD simulation with wind tunnel test for accurately and efficiently predicting the VIV response of a bridge deck. The measurement information of VIV of the deck section is collected from the wind tunnel test and fused with the CFD simulation. The optimisation for reducing uncertainties existing in wind tunnel test and CFD simulation is then carried out to make the CFD simulation as a digital twin. The digital twin is finally used to investigate the blockage effect of wind tunnel test and give an accurate and efficient prediction of VIV of the bridge deck. The flat closed-box steel deck section used in the Xiangshan Harbor cable-stayed bridge is selected as a case study. The results from the case study show that the digital twin can be established and used for an accurate and efficient prediction of VIV of the bridge deck section.

To ensure the safety of bridges, the comfort of pedestrians and vehicles on bridges, the vortex-induced forces on flat-steel-box girders need to be investigated. The total vortex-induced forces integrated on the surfaces of girders have been studied extensively. This study will be mainly focused on the characteristics of surface distributed vortex-induced force, which can be beneficial to the vortex-induced vibration (VIV) reduction with local aerodynamic optimization. Computational Fluid Dynamics (CFD) method is employed for the simulation of the VIVof a flat-steel-box girder. The simulation results are verified through the comparison with the results of corresponding wind tunnel test. A self-adaptive nonlinear fitting method is proposed to determine the vortex-induced force model. A vortex-induced force contribution factor is defined to account the contribution of the components and the surface location. Based on the surface distributed vortex-induced force analysis, several conclusions are made. The vortex-induced force presents a fairly strong multiple-frequency characteristic, and the high-order terms should be carefully considered. Most energy of the VIV comes from the linear and third-order aerodynamic damping terms. In terms of location, the roof takes most of the aerodynamic damping and the total vortex-induced force. The flow separation around the underside upstream corner, the underside downstream corner and the middle downstream comer lead to large third-order aerodynamic damping term. The flow separation around the underside upstream corner has great contribution to the linear aerodynamic stiffness term.

When a road vehicle moving on a bridge deck is passing by a bridge tower, the vehicle will be shielded briefly from the crosswind by the bridge tower. This study aimed to apply computational fluid dynamics to explore this special engineering problem for the first time. A stationary vehicle immerged in the wake of a bridge tower was first simulated and compared with wind tunnel test results. By using the dynamic mesh method, the moving of the vehicle passing by a bridge tower was then simulated. The results show that the computed aerodynamic coefficients of the stationary vehicle are generally larger than wind tunnel results. The side force and yawing moment coefficients of the moving vehicle are lower than those of the stationary vehicle. The results also show that the suddenly changing time of aerodynamic forces caused by the tower may be shorter than the average driver reaction time. [ABSTRACT FROM AUTHOR]