Search

Abstract: The total installed capacity of electric power generating in India is170288MW. The maximum demand during summer is 8000MW, during winter is 5500MW and during monsoon is 7000MW. The power generation is always less than the required demand. The power shortage varies from 2000MW to 4000MW. The gap between the generation and demand is to increase the generation capacity. But in developing country like India, it is not possible to install more capacity instantly. So the other important way to reduce the gap is energy conservation. In this paper it was proposed to implement energy conservation through energy efficiency and energy management. [Copyright &y& Elsevier]

Abstract: Presently the installed capacity of electricity generation in India is 160 GWe. The integrated ene rgy policy aims at an installed capacity of 778 GWe by 2031-32 to achieve per capita electricity consumption of 2700 kWh/year as against the 700 kWh/year. The share of nuclear power in India is around 3% presently. The increase in installed capacity is possible by increasing the share of nuclear power. India has opted for a unique three-stage power programme based on closed nuclear fuel cycle, which provides a multiplier effect through breeding. Consequent to the 123 agreement and clearance from Nuclear Supplier‟s Group (NSG) for international cooperation in the field of nuclear energy, the reactor technology options are wide open. Some of the technologies which are being pursued are: Pressurized Heavy Water Reactors (PHWRs) fueled with domestic Natural Uranium (NU), PHWRs fueled with imported Natural Uranium/Slightly Enriched Uranium (SEU), Light Water Reactors (LWRs) procured from abroad using imported Lightly Enriched Uranium (LEU) fuel, PHWRs with Reprocessed Uranium (RU) obtained from reprocessing spent fuel of LWRs, indigenous Pressurized Water Reactors (PWRs) and Fast Breeder Reactors (FBRs) using MOX/metallic fuel. The increase in the share of nuclear power through above technologies require setting up of fuel fabrication facilities such as: new PHWR Fuel Fabrication with indigenous sources, joint collaboration with foreign countries for fabricating fuel for imported LWRs, setting up PHWR fuel fabrication facilities with SEU/RU under international safeguards, setting up of enrichment and fuel fab rication facilities for indigenous PWRs and a series of fast reactor fuel fabrication facilities for fabricating fuel for FBRs. In addition to fuel fabrication facilities, facilities for manufacturing zirconium alloy and stainless steel structurals, tubes and components are also required to be set up. The paper gives in detail the emerging nuclear fuel fabrication activities in India. [Copyright &y& Elsevier]